Billy Goat KD502ICQ Debris Bag, 900802, Connector, Quick, Disconnect, 890176, Handle Assy, 900910

9GENERAL SAFETY

For your safety and the safety of others, these directions should be followed:

Do not operate this machine without first reading owner's manual and engine manufacturer's manual.

Use of Ear Protection is recommended while operating this machine.

Use of Eye and Breathing protection is recom-- mended when using this machine, especially in dry

and dusty conditions. Optional bag cover directs dust toward ground, away from the operator.

·DO NOT place hands or feet inside nozzle intake opening neardebris outlet or near any moving parts.

·DO NOT start engine without debris bag and quick discon nect connected firmly in place to exhaust outlet.

·DO NOT start or operate machine with debris bag zipper open.

·DO NOT operate during excessive vibration.

·DO NOT remove bag until engine has been turned off and has come to a complete stop.

·DO NOT remove hose kit cap on nozzle until engine has been turned off and has come to a complete stop.

·DO NOT operate machine with hose cap, bag or hose removed. ·DO NOT use this machine for vacuuming exclusively sand,

dust, fine dirt, rock, glass, string like material, grain, rags, cans, metal, bark or water.

·DO NOT operate this machine on slopes greater than 20%. ·DO NOT pick up any hot or burning debris, or any toxic or

explosive material.

·DO NOT allow children to operate this equipment.

	3
GENERAL SAFETY	& ASSEMBLY

10ASSEMBLY

Read all safety and operating instructions before assembling or starting this unit.

PUT OIL IN ENGINE BEFORE STARTING

Your Billy Goat is shipped from the factory in one carton, completely assembled except for the debris bag, upper handle, height adjustment rod and bag quick disconnect.

1.ASSEMBLE upper handle securely to lower handle stubs using handle screws (item 8), washers (item 25) and nut lock 5/16-18 (item 26), with screw heads facing inward toward debris bag. Otherwise, premature bag wear could result.

2.ASSEMBLE height adjustment rod (item 23), thru eye bolt (item 15), on upper handle and thru upper flange of height adjustment bracket (item18), thru spring (item 20), and thru lower flange of height adjustment bracket (item 18). Insert pin (item 22), between spring and lower flange of height adjustment bracket (see VIEW A on page 6). Slide grip (item 16), onto upper end of height adjustment rod (item 23).

3.UNFOLD the debris bag (item 1) and fasten bag neck to bag quick disconnect (item 12). Attach firmly to housing exhaust (item 52) see fig. 2.

4.ATTACH bag hanger straps to loops (item 11), preassembled to upper handle.

5.ATTACH throttle assy. (item 2), to handle using cable clamps (item 9).

6.CONNECT spark plug wire.

11PACKING CHECKLIST

These items should be included in your carton. If any of these parts are missing, contact your dealer.

23 16

Check	Debris Bag
	900802
Check	Connector
	Quick
	Disconnect
Check	890176
	Handle Assy
Check	900910
	Rod Height
	Adj. 900978

8

20

Check Per Model

QUICK DISCONNECT

26 25

9

Attach upper handle using screws, washers and lock nuts provided in parts bag.

Parts Bag

& Literature

22Assembly

Engine{

Manual

Per Model

Check

Check

Parts Bag &

Literature

Assembly

900934 Per Model

Briggs & Stratton

P/N 272262 English

Honda

P/N 31ZE6030 00X31- ZE6-0300 English

Fig. 2

Part No. 890255

Denotes parts found in Parts Bag Assembly (shown on page 4).

Page 3 of 8

Form No. F021695C