Rheem PTG53-(PVN)(PVP)(XN)(XP) Remote Control Installation, Model, Description Range Number

Page 20

Installing the Main Remote Control:

WARNING: Field wiring connections and electrical grounding must comply with local codes, or in the absence of local codes, with the latest edition of the National Electrical Code, ANSI/NFPA 70, or in Canada, Canadian Electrical Code, CSA C22.1 Part 1.

Remote Control Installation

NOTICE: The provided remote control will allow a maximum temperature setting of 120°F (49°C).

Temperatures of up to 140°F (60°C) can be achieved with dip switch adjustment. Only qualified service personnel should perform this adjustment.

NOTICE: An optional cable (EZ Link Cable) can be purchased separately to manifold two heaters together.

One (1) remote control is provided with the water heater. Additional remote controls may be purchased separately. Up to three (3) remote controls can be used with this water heater.

The following are considerations for determining the location of the remote control(s):

DO NOT install any remote control outdoors or in areas where it can come in contact with water.

Place remote control out of children’s reach.

The remote control can be installed in convenient locations such as the kitchen, laundry room, utility room, or directly beside the indoor water heater.

Avoid areas where the remote control may be exposed to heat, e.g. ranges or heaters.

Avoid areas where the remote control

may be subjected to oil and/or steam from cooking.

Avoid areas where chemical agents (such as thinner, benzine and alkalines) are used.

Avoid areas of direct sunlight.

The MAXIMUM distance between the water heater and the remote control installation location is limited to 195 feet (59 m) of wire.

NOTICE: Only one of each type of remote controls can connect to the water heater. Therefore, a maximum of three controls can connect to the water heater.

No other manufacturer’s controls are suitable for use with this water heater.

DO NOT attempt to disassemble the remote control.

 

Remote

Remote

Temperature

 

 

Control

 

 

Control

Set Point

Availability

Base Plate

Model

Description

Range

 

Number

 

MAIN

 

 

 

Control

 

 

100°F–120°F

Optional (Sold

 

USC1-117

BATH 1

 

(38°C)–(49°C)

Separately)

 

 

 

PRIORITY

 

 

100°F–120°F

Optional (Sold

 

USC2-117

BATH 2

°F

(38°C)–(49°C)

Separately)

 

 

 

POWER

 

 

 

 

ON/OFF

 

 

100°F–120°F

 

Mounting Screw x 2

 

 

Factory Default

 

 

(38°C)–(49°C)

Control screw

 

 

 

UMC-117

MAIN

 

 

 

 

 

125°F–140°F

With Dip Switch

 

 

 

(52°C)–(60°C)

Adjustment

20

Image 20
Contents Tankless Water Heater Injury You can find them on a label on the applianceThat will result in death or serious Install and Properly Vent the Water HEATER… N G E R Natural GAS and Liquefied Petroleum Models Read and Follow this Safety Information Carefully Installing the Outdoor water heater Location of the Outdoor water heaterInstalling the Indoor water heater Location of Indoor Water HeaterInspect Shipment Combustion and Ventilation Air Indoor Water Heater OnlyCorrosive Atmospheres Venting Venting LengthsMaximum Vent Length Minimum Vent Length The ventingDraining the Condensate Venting Through Closed SpacesAppliance Vent Adapter Installing the water heater Horizontal Vent Terminal LocationAdditional Considerations Outdoor Water HeaterIndoor Water Heater Vent Horizontal Wall Thimble Installation Vertical Vent Installation Vertical Vent Termination LocationWater Supply Connections Mounting the Water HeaterThermal Expansion Water Filter Clean Water Inlet Check Valve Nipple Relief Valve Leak Testing Pressure Testing the Gas Supply SystemGas Supply High AltitudeRemote Control Installation ControlModel Description Range NumberRemote Control ExtensionWall CablePenetration Suitable Indoor or Outdoor water heaters Electrical ConnectionIndoor water heaters only Indoor Models Outdoor ModelsHot and Cold Pipe Insulation Installation During Installation of this water heater…Insulation Blankets Do’sInstallation Check List Lighting the water heater To Turn OFF GAS to ApplianceSafety Precautions Water Temperature SettingTime/Temperature Relationship in Scalds Operating the water heaterWater Temperature Setting… Drain heater. See Draining Water Heater section on Routine Preventative MaintenanceHousekeeping Venting System Inspection Burner InspectionVacation and Extended Shut-Down Condensate Trap InspectionDraining the Water Heater Freeze ProtectionBefore You Call For Service… Indoor Water Heater Only Outdoor Water Heater OnlyReplacement Parts Instructions For Placing a Parts OrderTemperature Setting DIP Switch Adjustment If YOU Need Service

RMTG2-53(PVN)(PVP)(XN)(XP), RTG2-53(PVN)(PVP)(XN)(XP), RUTG2-53(PVN)(PVP)(XN)(XP), PTG53-(PVN)(PVP)(XN)(XP) specifications

Rheem PTG53-(PVN)(PVP)(XN)(XP), RUTG2-53(PVN)(PVP)(XN)(XP), RTG2-53(PVN)(PVP)(XN)(XP), and RMTG2-53(PVN)(PVP)(XN)(XP) are an impressive lineup of tankless water heaters that exemplify efficiency, technology, and convenience. These models represent Rheem's commitment to innovation in water heating solutions, appealing to both residential and commercial users.

At the core of these models is their ability to deliver continuous hot water on demand, which eliminates the need for large storage tanks. The compact design allows for flexible installation options, saving valuable space and making them suitable for varied settings, including tight spaces. The units are designed to provide an endless supply of hot water, making them ideal for families with high hot water needs.

Advanced heating technology is another hallmark of the Rheem PTG53 and its counterparts. These models typically feature high-efficiency condensing design, which captures and reuses exhaust heat to enhance overall efficiency. This means users can enjoy lower energy bills while also contributing to a reduced environmental footprint.

The Rheem Tankless Water Heaters come equipped with smart functionalities, including digital displays for easy temperature settings and monitoring. Some models are compatible with Wi-Fi connectivity, enabling users to control and monitor their water heating systems remotely through a smartphone app. This feature adds an extra layer of convenience, particularly for tech-savvy homeowners seeking seamless integration into their smart home ecosystems.

Safety features are also well-considered in these models, with automatic shut-off mechanisms and overheating protection ensuring safe operation. Additionally, they boast impressive flow rates, providing sufficient hot water for multiple fixtures simultaneously, thus meeting the demands of larger households or commercial establishments.

Finally, Rheem stands behind its products with robust warranties, showcasing confidence in their durability. The PTG53, RUTG2, RTG2, and RMTG2 models are constructed to offer longevity and reliability, ensuring peace of mind for users.

In summary, Rheem's PTG53-(PVN)(PVP)(XN)(XP), RUTG2-53(PVN)(PVP)(XN)(XP), RTG2-53(PVN)(PVP)(XN)(XP), and RMTG2-53(PVN)(PVP)(XN)(XP) represent the pinnacle of tankless water heating technology. With their efficient, space-saving design, advanced features, and emphasis on safety, these units are well suited for modern living, providing endless hot water and comfort to users.