GE AP13787 installation instructions Housekeeping, Venting System Inspection, Burner Inspection

Page 26

Instructions

Care and cleaning of the water heater.

Installation Instructions Safety

!DANGER: Combustible materials, such as clothing, cleaning materials, or flammable liquids, etc., must not be placed against or next to the water heater.

Housekeeping

Visually inspect pilot burner and relight if necessary.

To ensure sufficient ventilation and combustion air supply, proper clearances must be maintained.

When installed in a closet, DO NOT block or obstruct any of the combustion air inlet openings located around the perimeter of the water heater. A minimum of 1” is required between these combustion air inlet openings and any obstruction.

DO NOT obstruct or block the Flammable Vapor Sensor. The sensor does not require any maintenance or cleaning. DO NOT expose to cleaning agents.

Instructions

Venting System Inspection

Care and Cleaning Operating

The water heater’s internal flue must be inspected annually to be certain it is clean by removing the blower assembly and flue baffle.

When reinstalling the flue baffle make certain it is hung securely by its hanger at the top of the flue way.

Reinstall the blower assembly.

Inspect the gas venting system and the chimney.

Make certain the vent connector from the blower assembly to the chimney is properly positioned and securely attached.

If after inspection of the vent system you found soot or deterioration;

call the local gas utility to correct the problem and clean the flue, or replace the flue, flue baffle, and venting system before resuming operation of the water heater.

Test for spillage at the blower assembly relief opening after 5 minutes of burner operation. Use a flame of a match or candle or smoke.

Customer Service Troubleshooting Tips

Proper burner pattern.

Burner Inspection

Visually inspect the pilot burner and main burners annually.

Through the sight glass, inspect the pilot burner flame with the main burner off and inspect the main burner while firing.

If any unusual burner operation is noted, the water heater should be shut off until qualified service assistance can be obtained.

!CAUTION: For your safety, cleaning of the burner must be performed only by qualified service personnel, as it involves the disconnection of gas piping and leak testing.. The burner chamber is a sealed area. If the burner access door is removed, the burner access door gasket must be replaced.

For cleaning, remove the burner from the water heater. A vacuum cleaner can be used on the burner and floor shield inside the water heater.The burner can also be cleaned by scrubbing with mild detergent.

26

Image 26
Contents Rheem Manufacturing Company With Installation Instructions for the InstallerResidential 40 and 50 Gallon Do not try to light any applianceFor Your Records R N I N G For Hot Water Scalds Water Temperature Time To Produce a Serious Burn120F 90F 160F Vacation Setting Safety Instructions Installation Care and Cleaning Customer Service Troubleshooting TipsFront Sides Rear Top Installing the water heaterLocation Combustion and Ventilation Air Customer ServiceInspect Shipment Corrosive AtmospheresThermal Expansion Typical InstallationCleaning Troubleshooting Tips Customer Service Water Supply ConnectionsTo Fill the Water Heater Care and Cleaning OperatingRelief Valve CondensationTroubleshooting Tips Customer Service Leak TestingPressure Testing the Gas Supply System Gas SupplyCustomer Service Troubleshooting Blower Assembly InstallationIf not factory installed VentingVenting information for 3 Vents Maximum and Minimum Vent LengthsVenting information for 2 Vents Additional Considerations Care and CleaningHorizontal Vent Terminal Location OperatingInstructions Care and Cleaning Horizontal Vent InstallationVertical Vent Installation Vertical Vent Termination LocationCementing Joints Cleaner-Primer and Medium Body Solvent CementDraining the Condensate Wiring ServiceInsulation Blankets Heat Trap Hot and Cold Pipe Insulation InstallationDuring Installation of this water heater Water Supply Installation ChecklistWater Heater Location Care and Cleaning Troubleshooting Tips Combination Potable and Space Heating ApplicationLighting the water heater Installation Instructions Operating Safety PrecautionsOperating Procedure Troubleshooting Tips Customer Service120F Water Temperature Setting…Water Temperature Safety Routine Preventative MaintenanceInstructions Installation Instructions Draining the Water HeaterVenting System Inspection Installation Instructions SafetyHousekeeping Burner InspectionVacation and Extended Shut-Down Anode RodBefore You Call For Service… Producing popping Rumbling noiseRelief valve Noise or drainingGas Valve LED Error Codes Second SecondsOperating Instructions Care and Cleaning Replacement PartsBurner Assembly Kit Instructions For Placing a Parts OrderInstallation Instructions Troubleshooting Tips If YOU Need Service Please place in envelope and mail to If you require service, call Consumer Product Ownership Registration

AP13787 specifications

The GE AP13787 is a smart and innovative appliance that has quickly gained attention for its advanced features and modern technologies. This product exemplifies GE's commitment to providing consumers with high-quality and efficient home solutions. The GE AP13787 stands out in the market, particularly due to its combination of functionality, energy efficiency, and user-friendly design.

One of the primary features of the GE AP13787 is its cutting-edge smart technology, which integrates seamlessly with smart home systems. This appliance is equipped with Wi-Fi connectivity, allowing users to control it remotely through a smartphone application. This capability enhances convenience, as consumers can monitor and adjust settings from anywhere, whether they are at home or on the go. The smart diagnosis feature also adds value, enabling users to troubleshoot potential issues quickly, minimizing downtime, and ensuring the appliance operates optimally.

In addition to its smart capabilities, the GE AP13787 boasts energy-efficient performance, an increasingly vital consideration for eco-conscious consumers. The appliance is designed to reduce energy consumption without sacrificing performance, helping users save on utility bills while also promoting sustainability. Its Energy Star certification is a testament to its efficiency, reflecting GE’s emphasis on responsible manufacturing and environmental stewardship.

Another notable characteristic of the GE AP13787 is its spacious and thoughtful design. It features ample storage and organization options, enabling users to maximize their kitchen space effectively. With adjustable shelves, clear bins, and easy-access compartments, finding and storing food items becomes a hassle-free experience.

Moreover, the GE AP13787 includes advanced cooling technologies that ensure optimal food preservation. Its Precision Temperature Management system keeps food at ideal temperatures, while the advanced air circulation technology promotes even cooling throughout the appliance. This feature is especially beneficial for maintaining the quality of perishables, extending their shelf life.

Overall, the GE AP13787 delivers a blend of modern technology, energy efficiency, and practical design. It is a perfect addition to any contemporary kitchen, catering to the demands of today’s consumers who seek convenience and quality. As the market for smart home appliances continues to grow, products like the GE AP13787 illustrate how innovation can enhance everyday living while being mindful of environmental impact.