Desa VML27PR installation manual Product Identification, Local Codes

Page 3

SAFETY INFORMATION PRODUCT IDENTIFICATION LOCAL CODES

3

SAFETY INFORMATION

Continued

1.This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

2.Do not place propane/LP supply tank(s) inside any structure. Locate propane/LP supply tank(s) outdoors (propane/LP mod- els only).

3.To prevent performance problems, the use of a propane/LP tank of less than 100 lbs. capacity is not recommended (pro- pane/LP models only).

4.If you smell gas

•shut off gas supply

•do not try to light any appliance

•do not touch any electrical switch; do not use any phone in your building

•immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions

•if you cannot reach your gas supplier, call the fire department

5.This heater shall not be installed in a bedroom or bathroom unless installed as a vented appliance (see Installing Damper Clamp Accessory for Vented Operation, page 9).

15.Do not use heater if any part has been exposed to or under water. Immediately call a qualified service technician to in- spect the room heater and to replace any part of the control system and any gas control which has been under water.

16.Do not operate heater if any log is broken. Do not operate heater if a log is chipped (dime-sized or larger).

17.Turn heater off and let cool before servicing or repairing. If using optional remote control accessories, make sure the se- lector switch is in the OFF position. Only a qualified service person should install, service, or repair heater.

18.If using optional remote control accessories, make sure the selector switch is in the OFF position when you are away from home for long periods of time.

19.This heater must not be connected to any external electrical source.

20.Operating heater above elevations of 4,500 feet could cause pilot outage.

21.Provide adequate clearances around air openings.

PRODUCT IDENTIFICATION

6.Before installing in a solid fuel burning fireplace, the chimney flue and firebox must be cleaned of soot, creosote, ashes and loose paint by a qualified chimney cleaner. Creosote will ig- nite if highly heated. Inspect chimney flue for damage. If dam- aged, repair flue before operating heater.

7.Do not burn solid-fuel in a masonry or UL127 factory-built fireplace in which a vent-free room heater is installed.

8.If fireplace has glass doors, never operate this heater with glass doors closed. If you operate heater with doors closed, heat buildup inside fireplace will cause glass to burst. Make sure there are no obstructions across openings of fireplace.

9.This log heater is designed to be smokeless. If logs ever appear to smoke, turn off heater and call a qualified service person. Note: During initial operation, slight smoking could occur due to log curing and heater burning manufacturing residues.

10.To prevent the creation of soot, follow the instructions in Clean- ing and Maintenance, page 18.

11.Before using furniture polish, wax, carpet cleaner, or similar products, turn heater off. If heated, the vapors from these prod- ucts may create a white powder residue within burner box or on adjacent walls or furniture.

12.This heater needs fresh, outside air ventilation to run properly. This heater has an oxygen depletion sensing (ODS) pilot light safety system. The ODS shuts down the heater if not enough fresh air is available. See Air for Combustion and Ventilation, pages 4 through 6. If heater keeps shutting off, see Trouble- shooting, pages 19 through 21.

13.Do not run heater

•where flammable liquids or vapors are used or stored

•under dusty conditions

14.Do not use this heater to cook food or burn paper or other objects.

Log Set

Base

Assembly

Optional Hand-Held

Remote Control

Piezo

Ignitor

Control

Cover Log

Control Knob

Flame Adjustment Knob

Figure 1 - Product Identification

LOCAL CODES

Install and use heater with care. Follow all local codes. In the absence of local codes, use the latest edition of The National Fuel Gas Code, ANSI Z223.1/NFPA 54*.

*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

Note: Where listed vented decorative logs are required, thermostat operation is not permitted.

For more information, visit www.desatech.com

111115-01D

Page 2 Page 4
Image 3
Page 2 Page 4
Contents What to do if YOU Smell GAS Remote Control Ready Model Patent PendingFLAME-MAX VML27NR VML27PRSafety Information Table of ContentsLocal Codes Product IdentificationAIR for Combustion and Ventilation Product FeaturesRemote Control Accessories UnpackingDetermining FRESH-AIR Flow for Heater Location Confined and Unconfined SpaceDetermining if You Have a Confined or Uncon- fined Space Ventilation Air From Outdoors InstallationVentilation AIR Ventilation Air From Inside BuildingCheck GAS Type Installation and ClearancesMinimum Fireplace Clearance to Combustible Materials LOG Sizing RequirementsDetermining Minimum Mantel Clearance Determining Minimum Mantel Clearance When using a HoodMantel Clearances Minimum Noncombustible Material ClearancesFloor Clearances Installing Damper Clamp Accessory for Vented OperationInstalling Remote Receiver Installing Heater Base AssemblyInstalling Optional Remote Control Accessories Installation Items NeededInstalling 9-Volt Battery in Receiver Connecting to GAS SupplyChecking GAS Connections Pressure Testing Gas Supply Piping SystemInstalling Logs Pressure Testing Heater Gas ConnectionsProperty damage or personal injury Operating Heater For Your Safety Read Before LightingControl Knob and Ignitor Button Location Lighting InstructionsON/OFF Series Model Ghrcb Manual Lighting ProcedureTo Turn OFF GAS To Appliance Optional HAND-HELD Remote OperationMain Burner Inspecting BurnersPilot Flame Pattern Burner Primary AIR HolesLogs Cleaning MaintenanceWiring Diagram Cleaning Burner Injector Holder and Pilot AIR Inlet HoleObserved Problem Possible Cause TroubleshootingObserved Problem Possible Cause Remedy Top Gas leak. See Warning statement atModels VML27PR VML27NR Illustrated Parts BreakdownKEY Part Number VML27PR VML27NR Description QTY Parts ListParts Under Warranty SpecificationsService Hints Technical Service Replacement PartsOwners Registration Form Postage Required Receiver and HAND-HELD Remote CON Trol KIT Ghrcb WALL-MOUNT Thermostat Switch GWMT1WALL-MOUNT ON/OFF Switch GWMS2 Cleaning KIT GCKWarranty Information

VML27PR specifications

Desa VML27PR is a cutting-edge development that represents a significant leap forward in efficient living and sustainable technology. This modern residential complex is designed with both aesthetics and functionality in mind, making it a prime choice for contemporary urban dwellers.

One of the standout features of Desa VML27PR is its commitment to energy efficiency. The buildings are equipped with solar panels that harness renewable energy, significantly reducing reliance on non-renewable power sources. This integration not only lowers utility bills for residents but also contributes to a lower carbon footprint, aligning with global sustainable development goals.

The architecture of Desa VML27PR is marked by its contemporary design, featuring open floor plans and large windows that maximize natural light and ventilation. The use of eco-friendly construction materials further enhances the sustainability aspect, ensuring that the development minimizes its impact on the environment while providing a comfortable living space.

Safety and security are of paramount importance in Desa VML27PR. The complex is equipped with state-of-the-art security systems, including video surveillance and controlled access points, giving residents peace of mind. Additionally, the premises are well-lit and feature landscaped green spaces, promoting a sense of community while ensuring a safe environment for families.

Another significant characteristic of Desa VML27PR is its emphasis on smart technology integration. Homes are equipped with smart appliances and systems that allow residents to control lighting, heating, and security from their mobile devices. This not only enhances convenience but also promotes energy savings by enabling users to monitor and manage their usage effectively.

Desa VML27PR also boasts a variety of communal facilities designed to foster community engagement. These include recreational areas, fitness centers, and coworking spaces that encourage interaction among residents, making it an ideal place for those seeking a vibrant social life.

In conclusion, Desa VML27PR exemplifies the future of urban living, combining sustainability, modern design, advanced technology, and community-focused amenities. It stands as a model for future residential developments, showcasing how contemporary living can harmoniously coexist with environmental responsibility and community engagement. Whether seeking a home for a growing family or a sophisticated living space for professionals, Desa VML27PR is equipped to meet diverse needs, making it a premier choice in today’s real estate market.
Top Page Image Contents