Desa RH10PT installation manual Checking GAS Connections for Permanent GAS Supply

Page 10

INSTALLATION

Continued

CHECKING GAS CONNECTIONS FOR PERMANENT GAS SUPPLY

WARNING: Test all gas piping and connections, internal and external to unit, for leaks after installing or servicing. Correct all leaks at once.

WARNING: Never use an open flame to check for a leak. Apply a noncorrosive leak detec- tion fluid to all joints. Bubbles forming show a leak. Correct all leaks at once.

CAUTION: Make sure exter- nal regulator has been installed between propane/LPsupply and heater. See guidelines under Connecting to Permanent Gas Supply, page 8.

PRESSURE TESTING GAS SUPPLY PIPING SYSTEM

Test Pressures In Excess Of 1/2 PSIG (3.5 kPa)

1.Disconnect appliance with its appliance main gas valve (control valve) and equipment shutoff valve from gas supply piping system. Pressures in excess of 1/2 psig will damage heater regulator.

2.Cap off open end of gas pipe where equipment shutoff valve was connected.

3.Pressurize supply piping system by opening propane/LP supply tank valve or using com- pressed air.

4.Check all joints of gas supply piping system. Apply a noncorrosive leak detection fluid to all joints. Bubbles forming show a leak.

5.Correct all leaks at once.

6.Reconnect heater and equipment shutoff valve to gas supply. Check reconnected fittings for leaks.

Test Pressures Equal To or Less Than 1/2 PSIG (3.5 kPa)

1.Close equipment shutoff valve (see Figure 14).

2.Pressurize supply piping system by either opening propane/LP supply tank valve or using compressed air.

3.Check all joints from supply tank to equip- ment shutoff valve (see Figure 15). Apply a noncorrosive leak detection fluid to all joints. Bubbles forming show a leak.

4.Correct all leaks at once.

PRESSURE TESTING HEATER GAS CONNECTIONS

1.Open equipment shutoff valve (see Figure 14).

2.Open propane/LP supply tank valve.

3.Make sure control knob of heater is in the OFF position.

4.Check all joints from equipment shutoff valve to thermostat gas valve (see Figure 15). Apply a noncorrosive leak detection fluid to all joints. Bubbles forming show a leak.

5.Correct all leaks at once.

6.Light heater (see Lighting Instructions, page 11). Check all other internal joints for leaks.

7.Turn off heater (see To Turn Off Gas to Appli- ance, page 12).

8.Replace front panel.

Equipment

 

Open

 

Shutoff Valve

 

 

Closed

Figure 14 - Equipment Shutoff Valve

Control Valve Location

Propane/LP

Supply

Tank

Equipment

Shutoff

Valve

Figure 15 - Checking Gas Joints

10

www.desatech.com

110373-01E

Page 9 Page 11
Image 10
Page 9 Page 11
Contents What to do if YOU Smell GAS Table of Contents Safety Information Do not USE this Heater insideLocal Codes UnpackingProduct Identification Product FeaturesInstallation PROPANE/LP SupplyInstalling Heater to Wall Thermostat Sensing BulbRemoving Front Panel Of Heater Installing Bottom Mounting ScrewPlacing Heater On Mounting Screws GAS Supply Connecting to Portable Cylinder GAS SupplyConnecting to Permanent Remove 90 gas fitting from hardware bagIf installing to a fixed fuel piping system, Installation ItemsFrom your dealer. See Accessories, Dealer. See Accessories,Test Pressures In Excess Of 1/2 Psig 3.5 kPa Checking GAS Connections for Permanent GAS SupplyTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Lighting Instructions For Your Safety Read Before LightingOperating Heater Ignitor Button Control KnobInspecting Heater Cleaning Maintenance CabinetTroubleshooting Observed Problem Possible Cause RemedyWhen burner is lit Est position when burner is Delayed ignition of burner Manifold pressure is too lowBurner orifice is clogged Clean burner see Cleaning Or shut off Qualified service personGas leak. See Warning Statement aboveTechnical Service SpecificationsService Hints Service Publications AccessoriesIllustrated Parts Breakdown Parts List NJF-8CWarranty Information Keep this Warranty

RH10PT specifications

Desa RH10PT is a cutting-edge development that showcases the latest advancements in sustainable living and smart technology integration. Situated in an eco-friendly environment, this residential project boasts an impressive array of features designed to enhance the quality of life for its residents while minimizing environmental impact.

One of the main characteristics of Desa RH10PT is its commitment to sustainability. The development incorporates green building practices, utilizing eco-friendly materials and adhering to energy-efficient standards. Solar panels are installed on rooftops, providing residents with renewable energy that reduces electricity costs and carbon footprints. Rainwater harvesting systems are also integrated, allowing for the collection and reuse of water for irrigation and other non-potable uses.

In addition to its sustainability initiatives, Desa RH10PT is designed with smart technology in mind. The residential units are equipped with advanced home automation systems that enable residents to control lighting, heating, and security features remotely via smartphones or tablets. This technology not only enhances convenience but also improves energy management by allowing occupants to monitor and adjust their energy consumption in real time.

Safety is another paramount aspect of Desa RH10PT. The community is secured with state-of-the-art surveillance systems and gated entry points, ensuring a safe living environment for families. Additionally, the design of the neighborhood encourages a sense of community while providing ample green spaces, parks, and recreational facilities. This thoughtful layout promotes outdoor activities and fosters social interactions among residents.

Furthermore, Desa RH10PT emphasizes connectivity and accessibility. The development is strategically located near major transportation hubs, educational institutions, and healthcare facilities, making it an attractive option for families and professionals alike. The integration of walking and biking paths throughout the community encourages healthy lifestyles and reduces reliance on vehicles.

In conclusion, Desa RH10PT represents a modern approach to housing that harmonizes sustainability, technology, and community living. With its innovative features, eco-friendly practices, and smart home technologies, this development is poised to set a benchmark for future residential projects, ultimately shaping the way we think about urban living. Residents are afforded the opportunity to embrace a lifestyle that is not only comfortable but also responsible and forward-thinking, positioning Desa RH10PT as a model for sustainable, modern living in today's world.
Top Page Image Contents