Desa RH10PT installation manual Removing Front Panel Of Heater, Installing Bottom Mounting Screw

Page 7

INSTALLATION

Continued

3.Insert wall anchor (wings first) into hole. Tap anchor flush to wall.

4.For thin walls (1/2" or less), insert red key into wall anchor. Push red key to “pop” open anchor wings (see Figure 5).

IMPORTANT: Do not hammer key! For thick walls (over 1/2" thick) or solid walls, do not pop open wings.

5.Tighten two screws until 1/16" space (thick- ness of penny) is between screwheads and wall (see Figure 6).

Removing Front Panel Of Heater

1.Remove two screws near bottom corners of front panel.

2.Lift straight up on grill guard until it stops. Grill guard will slide up about 1/4".

3.Pull bottom of front panel forward, then down.

Figure 4 - Folding Anchor

Thin Walls

 

Figure 8 - Removing Front Panel Of

 

Heater

(1/4" to

 

 

 

1/2" thick)

Installing Bottom Mounting Screw

 

1.

Locate bottom mounting hole. This hole is

 

 

near bottom on back panel of heater (see

Figure 5 - Popping Open Anchor Wings

 

Figure 9).

2.

Mark screw location on wall.

For Thin Walls

3.

Remove heater from wall.

 

Thin or Thick

4.

If installing bottom mounting screw into hol-

Wall (thick

 

low or solid wall, install wall anchor. Follow

wall shown)

 

steps 1 through 5 under Attaching To Wall

1/16"

 

Anchor Method, page 6. If installing bottom

 

mounting screw into wall stud, drill hole at

Space

 

 

marked location using 9/64" drill bit.

 

 

Solid

5.

Replace heater on wall.

6.

Insert bottom anchor screw through back panel

Wall

 

into bottom anchor or drilled hole (see Figure 9).

 

 

Figure 6 - Tightening Anchors

7.

Tighten screw until heater is firmly secured to

 

wall. Do not over tighten.

Placing Heater On Mounting Screws

1.Locate two keyhole slots on back panel of heater (see Figure 7).

2.Place large openings of slots over screwheads. Slide heater down until screws are in small portion of slots.

Keyhole Slots

Figure 7 - Location Of Keyhole Slots On Back Panel Of Heater

Note: Do not replace front panel at this time. Replace front panel after making gas connections and checking for leaks (see pages 8 through 10).

Figure 9 - Installing Bottom Mounting Screw

110373-01E

www.desatech.com

7

Image 7
Contents What to do if YOU Smell GAS Table of Contents Do not USE this Heater inside Safety InformationUnpacking Local CodesPROPANE/LP Supply Product FeaturesInstallation Product IdentificationThermostat Sensing Bulb Installing Heater to WallRemoving Front Panel Of Heater Installing Bottom Mounting ScrewPlacing Heater On Mounting Screws Remove 90 gas fitting from hardware bag Connecting to Portable Cylinder GAS SupplyConnecting to Permanent GAS SupplyDealer. See Accessories, Installation ItemsFrom your dealer. See Accessories, If installing to a fixed fuel piping system,Test Pressures In Excess Of 1/2 Psig 3.5 kPa Checking GAS Connections for Permanent GAS SupplyTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Ignitor Button Control Knob For Your Safety Read Before LightingOperating Heater Lighting InstructionsInspecting Heater Cabinet Cleaning MaintenanceObserved Problem Possible Cause Remedy TroubleshootingOr shut off Qualified service person Delayed ignition of burner Manifold pressure is too lowBurner orifice is clogged Clean burner see Cleaning When burner is lit Est position when burner isStatement above Gas leak. See WarningService Publications Accessories SpecificationsService Hints Technical ServiceIllustrated Parts Breakdown NJF-8C Parts ListKeep this Warranty Warranty Information

RH10PT specifications

Desa RH10PT is a cutting-edge development that showcases the latest advancements in sustainable living and smart technology integration. Situated in an eco-friendly environment, this residential project boasts an impressive array of features designed to enhance the quality of life for its residents while minimizing environmental impact.

One of the main characteristics of Desa RH10PT is its commitment to sustainability. The development incorporates green building practices, utilizing eco-friendly materials and adhering to energy-efficient standards. Solar panels are installed on rooftops, providing residents with renewable energy that reduces electricity costs and carbon footprints. Rainwater harvesting systems are also integrated, allowing for the collection and reuse of water for irrigation and other non-potable uses.

In addition to its sustainability initiatives, Desa RH10PT is designed with smart technology in mind. The residential units are equipped with advanced home automation systems that enable residents to control lighting, heating, and security features remotely via smartphones or tablets. This technology not only enhances convenience but also improves energy management by allowing occupants to monitor and adjust their energy consumption in real time.

Safety is another paramount aspect of Desa RH10PT. The community is secured with state-of-the-art surveillance systems and gated entry points, ensuring a safe living environment for families. Additionally, the design of the neighborhood encourages a sense of community while providing ample green spaces, parks, and recreational facilities. This thoughtful layout promotes outdoor activities and fosters social interactions among residents.

Furthermore, Desa RH10PT emphasizes connectivity and accessibility. The development is strategically located near major transportation hubs, educational institutions, and healthcare facilities, making it an attractive option for families and professionals alike. The integration of walking and biking paths throughout the community encourages healthy lifestyles and reduces reliance on vehicles.

In conclusion, Desa RH10PT represents a modern approach to housing that harmonizes sustainability, technology, and community living. With its innovative features, eco-friendly practices, and smart home technologies, this development is poised to set a benchmark for future residential projects, ultimately shaping the way we think about urban living. Residents are afforded the opportunity to embrace a lifestyle that is not only comfortable but also responsible and forward-thinking, positioning Desa RH10PT as a model for sustainable, modern living in today's world.