Dimplex WB5E 1, WB7, WB15, WB3 Introduction, Check List, Installation Positioning the Unit

Page 3

INTRODUCTION

Your new water boiler is designed to give years of trouble free service provided that the instructions contained in this manual are followed carefully.

Your new boiler is energy efficient, simple to operate and easy to service.

It is recommended that the installation is carried out by a properly qualified fitter.

CHECK LIST

Before starting installation, check that you have the following parts:

1.Boiler Unit

2.Case

3.Mounting Template

4.Fitting Kit

5.Tap Kit (WB5E Only)

INSTALLATION

POSITIONING THE UNIT

The heater should be positioned in a convenient place on a wall that is capable of supporting it safely. Use the mounting template and fitting kit provided.

Position the boiler so that the tap is about 400mm above a draining board. Leave sufficient space around the unit to enable access for servicing, paying particular attention to the position of the top centre fixing screw that holds the cover in place.

Screw in the top two screws leaving about 6mm protruding and hang the machine using the keyhole slots provided. Once the machine is positioned, tighten the top screws and insert the bottom screw.

ELECTRICAL CONNECTION ALL MACHINES

Supply – 220/240V 50Hz – 3kW. The circuit should be protected by its own 13amp double pole connection unit with flex outlet to BS5733, alternatively the circuit should have means of disconnection incorporated in fixed wiring, having a contact separation of at least 3mm in all poles. Minimum cable size is 1.5mm2. The use of an ELCB is recommended.

Electrical installation should conform to current I.E.E. wiring regulations.

When using fixed wiring, the bare section of earth wire must be sleeved to within 8mm of the end.

Only a qualified electrician should carry out this work.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents AUTO-FILL Water Boilers Important Health and Safety Information Electrical Connection ALL Machines Installation Positioning the UnitIntroduction Check ListRear Entry of Cable Bottom Entry of CableWater Connection Bottom Entry Rear EntryOverflow Pipe Bottom Entry WB5E ONLY. FIT TAP Overflow Pipe Rear EntryVent Pipe FIT CaseOperation All models except WB5E Temperature Control & Safety CUT OUT CleaningOperation WB5Eonly Maintenance Technical Specification ALL ModelsDE-SCALING WB5E DE-SCALING All models except WB5EService Warning Light WB5E only Constant Service Warning Light All Models except WB5E

WB7, WB5E 1, WB3, WB15 specifications

The Dimplex WB series, including models WB5E, WB15, WB3, and WB7, represents an innovative and versatile range of electric heating solutions designed specifically for residential and commercial environments. With a combination of efficient heating technology and user-friendly features, these electric heaters provide effective warmth while maintaining aesthetic appeal.

The Dimplex WB5E is a compact unit that offers exceptional efficiency and low energy consumption. It features a built-in digital thermostat, allowing users to maintain the desired room temperature with precision. Moreover, it incorporates advanced convection heating technology, which circulates warm air effectively throughout the space, ensuring even warmth and comfort.

The WB15 model offers a higher output, making it suitable for larger rooms or commercial spaces. Its sleek design allows for wall mounting, preserving floor space while delivering powerful heating capabilities. This model also includes an adjustable thermostat and a timer function, enabling users to customize their heating schedule to maximize energy savings.

For those needing a more compact solution, the Dimplex WB3 is an ideal choice. This model is perfect for smaller rooms or areas where space is at a premium. Despite its size, the WB3 does not compromise on performance, utilizing rapid warm-up technology to quickly raise the ambient temperature. Additionally, the unit is equipped with safety features such as overheat protection and a tip-over switch, ensuring peace of mind for users.

The WB7 model strikes a balance between size and heating output, making it an excellent choice for medium-sized spaces. It comes with integrated fan assistance that enhances heat distribution, resulting in a comfortable atmosphere even in larger areas. The WB7 includes an easy-to-read LCD display for effortless temperature adjustments and a user-friendly control panel that offers various operational modes, such as eco and comfort settings.

All models in the Dimplex WB series are designed with energy efficiency in mind, using technologies that reduce energy waste while providing reliable heat. Their contemporary aesthetic fits seamlessly into modern interiors, and the choice of finish options allows users to select a look that complements their decor. Overall, the Dimplex WB series represents a blend of functionality, safety, and style, catering to diverse heating requirements.
Top Page Image Contents