Bradford-White Corp E32-80R, E32-120R, E32-50S manual Service Procedure E32-IV, Thermostat Testing

Page 14
Illustration 8

SERVICE PROCEDURE E32-IV

Thermostat Testing

Thermostat Operation Testing

Water In Tank Is Cold With Power ON.

1.This procedure assumes line voltage, ECO and elements are in working order.

2.Turn power “ON” to water heater.

3. Set multi-meter to “Volts AC”.

4. Check across terminals L1 & L3 of thermostat (see illustration 8)

A) Rated voltage NOT present, Check fuses.

B) Rated voltage IS present, proceed to next step.

5. Check across terminals L4 and T2 of thermostat (see illustration 9).

A) Rated voltage NOT present, Recheck ECO. If ECO is okay, replace thermostat.

B) Rated voltage IS present, okay thermostat is calling for heat, proceed to next step.

6. Check across element terminals (see illustration 10).

A) Rated voltage NOT present, check wire connections from thermostat to element.

B)Rated voltage IS present, Repeat element testing see page 11.

WARNING

High voltage exposure. Use caution to avoid

personal injury during this procedure.

Illustration 9

Water Temperature In Tank Is Above Thermostat Setting.

 

1. This procedure assumes line voltage, ECO and

Illustration 10

elements are in working order.

2.Turn power “ON” to water heater.

3.Set multi-meter to “Volts AC”.

4.See illustration 9 above, check across terminals L4 and T2 of thermostat.

A)Rated voltage IS present, replace thermostat.

B)Rated voltage NOT present, thermostat is okay.

C)Lower than rated voltage IS present, recheck for grounded element (see page 11).

Page 14

Image 14
Contents Commercial Electric Energy Saver Service Procedure E32 Medium Duty Commercial Electric Water HeatersRED General InformationRED Black RED Full Load Amperes-Phase 1/Phase Input Kw 208V 240V 277V 380V 415V 480VSequence of Operation Sequence of OperationField Conversion for Single-Phase to Three-Phase Electrical Phase ConversionThree-Phase to Single-Phase E32 Series Phase Conversion Rating Plate Overlay KitsRating Plate Modification Bradford White CorporationTroubleshooting Making voltage checks to avoid personal InjuryHigh voltage exposure. Be sure power is turned Service Procedure E32-IHeating Element Testing OFF to water heater prior to performing thisLine Voltage Testing Service Procedure E32-IILine Voltage Testing Personal injury during this procedure Service Procedure E32-IIIFuse Testing High voltage exposure. Use caution to avoidWater Temperature In Tank Is Above Thermostat Setting Service Procedure E32-IVThermostat Testing OFF when performing this procedure Service Procedure E32-VHigh voltage exposure. Be sure power is Thermostat ReplacementHeating Element Replacement Heating Element RemovalAnode Inspection and Replacement Service Procedure E32-VIIDip Tube and Anode Inspection Replacement Asse Approved Mixing Valve optional Page Parts@bradfordwhite.com Techserv@bradfordwhite.com
Related manuals
Manual 12 pages 60.05 Kb

Commercial Electric Energy Saver Medium Duty E32 Series Models, E32-80R, E32-50S, E32-120R specifications

Bradford-White Corporation offers a range of high-efficiency water heaters, including the E32 series models: E32-120R, E32-50S, and E32-80R. These models fall under the Commercial Electric Energy Saver Medium Duty category, designed for various commercial applications that require reliable hot water delivery.

The E32 series is built to meet the demands of commercial environments while ensuring energy efficiency. The E32-120R model features a 120-gallon capacity, making it ideal for establishments with high hot water usage. Similarly, the E32-50S offers a 50-gallon capacity, suitable for smaller commercial operations, while the E32-80R provides an 80-gallon option for medium-sized applications. Each model is designed to deliver hot water on demand, with recovery rates optimized for commercial settings.

A notable feature of the E32 series is its Energy Saver technology. These models are equipped with high-efficiency insulation and advanced heating components that minimize heat loss and reduce energy consumption. This not only leads to lower utility bills but also contributes to a reduced carbon footprint, aligning with contemporary environmental standards.

The integration of an advanced electronic control system in the E32 series allows for precise temperature control and monitoring. Users can easily set and adjust water temperatures to meet specific needs, enhancing comfort and safety. Additionally, these models are designed with user-friendly installation features, allowing for straightforward setup and integration into existing systems.

Durability is a hallmark of the E32 series, with each model constructed using high-quality materials that withstand the rigors of commercial use. The tanks are designed to resist corrosion, ensuring a long lifespan and reliable performance. Furthermore, these heaters come with warranties that reflect Bradford-White’s commitment to quality and customer satisfaction.

Maintenance is easy with the E32 series, featuring replaceable heating elements and accessible anodes. This reduces downtime and increases the longevity of the units. Moreover, they comply with all safety and performance regulations, providing peace of mind for business owners.

In summary, the Bradford-White E32-120R, E32-50S, and E32-80R models are versatile, energy-efficient, and durable solutions for commercial hot water needs. Their combination of advanced technology, user-centric features, and robust construction make them a reliable choice for various commercial applications.