Furuno NX-700B manual Choosing the Local Frequency, Editing the Settings for Station and Message

Page 26

2. OPERATION

2.7Choosing the Local Frequency

You can choose 490 kHz or 4209.5 kHz as the local frequency. This function is only available for the Auto and Manual modes. (See paragraph 2.6.)

1.Press the MENU/ESC key to show the main menu.

2.Press ▲ or ▼ to choose NAVTEX, and then press the ENT key or ►.

3.Press ▲ or ▼ to choose Local Channel, and then press the ENT key or ► to show the local channel options.

490kHz

4209.5kHz

Local channel options

4.Press ▲ or ▼ to choose the frequency 490 kHz or 4209.5 kHz, and then press the ENT key.

5.Press the MENU/ESC key several times to close the menu.

2.8Editing the Settings for Station and Message

Stations and messages for receiving/displaying on each station (message) can be edited as below.

Rcv Station & Msg

Station

You can receive messages by station when Manual is chosen as the Receive Mode on the NAVTEX menu.

Message

You can choose the messages to receive when Manual or Auto is chosen as the Receive Mode on the NAVTEX menu. Note that A/B/D/L cannot be rejected.

User Select Station & Msg

Station

Choose the station to display on User Selected Messages, which is shown when the LIST key is pressed.

Message

Choose the type of message to display on User Selected Messages, which is shown when the LIST key is pressed.

Note 1: For messages, the alarm message is displayed always.

Note 2: When User Select is chosen as the Auto Print on NAVTEX menu, only the messages chosen here are printed. (See paragraph 2-11.)

1.Press the MENU/ESC key to show the main menu.

2.Press ▲ or ▼ to choose NAVTEX, and then press the ENT key.

2-6

Image 26
Contents Navtex Receiver 00015280402 Important Notice Safety Instructions Safety information for the Installer Forword Features Table of Contents Vii Equipment Lists Name Type Code No Qty RemarksOptional Supply Power supply 100-115 12-24 VDC System ConfigurationsPower supply NX-700B NX-700A NX-7H Max mNavtex System Operation Principle of Navtex SystemHow Navtex Works Message Format NnnnNavtex Station Map Navtex Station List III NAV Latitude Longitude Freq Area Station Broadcast schedule UTC XII Turning the Unit On/Off OperationOperating Controls Display unit, front viewAdjusting LCD Dimmer All message display 518 kHzOther messages Confirming the New MessageSAR Search and Rescue message Sample Messages Message list Detailed messageMenu Choosing the Receive ModeSystem Display Service AutoLocal channel options Editing the Settings for Station and MessageChoosing the Local Frequency Rcv Station & MsgMessage Rcv Station & Msg AutoStation Edit window ex. Rcv Station & Msg518 Press 490 Switching the Frequency to DisplayAlarm Messages List options Processing MessagesChoosing messages to display Urgent messageProtecting message from deleting Alarm Messages User Messages Good Messages Lock MessagePrinting Messages Printing all messages displayedPrinting each message Canceling printingOff All Printing messages automatically518kHz Editing the Navtex Station ListINS Output Speed NavArea490kHz ID1 ID2 ID3 4209.5kHz Latitude 00NLongitude 00E 518kHz ID1 ID2 ID3 Range 400nm Save data ?Latitude 11N OostendeStation Oostende Longitude 48E 518kHz ID1 T ID2 ID3Message icon shown next to messages IconsIcon Status Meaning Status icon shown at the tip of display Messages List Message Meaning RemedySystem menu Other FunctionsNavtex menu Nav Data Display menu Description SettingSkips to $$ DistanceService menu Description Setting INSThis page is intentionally left be blank Maintenance program Maintenance & TroubleshootingMaintenance Check point RemedyFuse Replacement of Fuse, Battery and Thermal PaperBattery LCD DisplayThermal paper NX-700A only Troubleshooting SELET/READYKey test DiagnosticsMemory test Restoring all Default Settings Rx testTabletop, overhead mounting InstallationDisplay Unit For NX-700B Flush mountingFor NX-700A Mounting Method Receiver UnitGeneral mounting considerations Antenna Unit Mounting considerationsWiring Printer NX-700B onlyReceiver unit Receiver unit, inside viewHow to use J402 and 403 connector TTYCS-1Q For Navigator or INSAntenna cable For RG-10/UY, RG-214 cableGrounding OP04-2 To Receiver unit FMA-1 connectorExtending antenna cable length None Setting of PrinterSystem Upright InvertedDigital Interfacing PriorityGLL Latitude and longitude RMC Recommend Minimum Specific Gnss Data ZDA Time and date NRQ Request Navtex messages NMK Set Navtex mask$--ACK,xxx*hhCRLF Local alarm numberidentifier Checksum ACK AcknowledgeVHW Water speed and heading VTG Course over ground and ground speedVBW Dual ground/water speed Output data description NRX New Navtex received message ALR Set alarms Serial InterfaceMenu Tree NavtexFuruno Specifications of Navtex Receiver Furuno Packing List NX-700B/NX-700B-HK/NX-700B-R NX-7001-AN*/BN*/-R NX-7001-AA-*/BA NX-7H-0-10/-10-HK,NX-7H-0-20/-20-HK 工事材料表 004-514-530 08AW-X-9402 004-514-540 08AW-X-9403 Installation Materials 004-514-610 08AW-X-9404 Spare Parts List for Page Page Page Page Page 取付位置 NX-700A/B Index Processing0560