Furuno NX-700B manual Receiver unit, inside view

4. INSTALLATION

Receiver unit

All cables are gathered to the receiver unit. Connect cables at inside of the receiver unit as shown below.

RCV Board 08P3227

TB401	TB402	J402*			J403
(+)	(-)	1 2 3 4 5 6	1	2	3	4	5	6	7	8
		J401

		Antenna cable
		(to Antenna unit)
DPYC-2.5	TTYCS-1Q	Printer cable
(to ship's battery)	(to Navigator	(to Printer, NX-700B only)
	or INS )
		DPYC-1.5
		(to External alarm)

DSUB25P-DSUB25P-3M cable (to Display unit)

Receiver unit, inside view

Use the following JIS cable (Japan Industrial Standard) or equivalent to connect power source, INS and external alarm appropriately.

DPYC-2.5DPYC-1.5

Armor Armor

Sheath Sheath

φ = 12.5 mm φ = 11.7 mm

Conductor	Conductor
S = 2.5 mm 2	S = 1.5 mm 2
φ = 2.01 mm	φ = 1.56 mm

TTYCS-1Q (Four core twisted)

Armor

Sheath

Shield

φ = 11.3 mm

Conductor

S = 0.75 mm2

φ = 1.11 mm

For printer, use the cable supplied with the printer.

4-6