Furuno manual Flush mounting, For NX-700A, For NX-700B

4. INSTALLATION

Flush mounting

The display unit can be installed flush mounted in a console or panel by using the optional flush mount kit.

(For NX-700A)
Type: OP08-19	Code No.: 004-515-260			Remarks
Name	Type	Code No.	Qty
Mounting metal	08-023-1019	100-326-960	1
Self-tapping screw	5X20	000-802-081	6
Hex. bolt	M8x15	000-862-144	2
Spring washer	M8	000-864-262	2

1. Cut out a hole with dimensions as shown below in the mounting location. 284+0.5

168+0.5 30+1

7

156+1

275+1

7

4

Fixing hole

2.Attach the fixing metal to the display unit with two hex. bolts (M8x15, supplied with optional kit) and spring washers (supplied with optional kit).

3.Fasten six self-tapping screws to fix the display unit to the mounting location.

(For NX-700B)
Type: OP08-20	Code No.: 004-515-270
Name	Type	Code No.	Qty	Remarks
Mounting metal	08-023-2011	100-327-010	1
Self-tapping screw	5x20	000-802-081	4
Pan head screw	M4x12	000-802-130	4

1. Cut out a hole with dimensions as shown below in the mounting location.

155+0.5

144+1

156+1

155+0.5	4
	Fixing hole

2.Attach the fixing metal to the display unit with four pan head screws (M4X12, supplied with the optional kit).

3.Fasten four self-tapping screws (supplied with the optional kit) to fix the display unit to the mounting location.

4-2