Furuno NX-700B manual Restoring all Default Settings, Rx test

Page 46

3.MAINTENANCE & TROUBLESHOOTING

8.When the message “Hit any key” appears on the screen, press any key (except key) to show the Rx test screen.

The alarm for receiving monitor sounds while the Rx test is being conducted. Also the test message is printed when the item other than “None” at Printer on System menu.

Rx test

9.When the message “Hit any key.” appears on the screen, press any key (except key) or wait for one minute with no operation to finish.

10.Press the MENU/ESC key several times to close the menu.

3.5Restoring all Default Settings

This operation restores all default settings. The following two settings, however, are not disturbed.

-Received messages

-NAVTEX stations list (See paragraph 2.13.)

1.Press the MENU/ESC key to show the main menu.

2.Press ▼ to choose Service, and then press the ENT key.

3.Press ▲ or ▼ to choose Default Setting, and then press ENT key. The message “Restore default settings?” appears.

4.Press ◄ to choose “Yes”, and then press the ENT key. The Service menu appears.

5.Press the MENU/ESC key several times to close the menu.

3-6

Image 46

Contents Navtex Receiver 00015280402 Important Notice Safety Instructions Safety information for the Installer Forword Features Table of Contents Vii Equipment Lists Name Type Code No Qty RemarksOptional Supply Power supply 100-115 12-24 VDC System ConfigurationsPower supply NX-700B NX-700A NX-7H Max mHow Navtex Works Principle of Navtex SystemNavtex System Operation Message Format NnnnNavtex Station Map Navtex Station List III NAV Latitude Longitude Freq Area Station Broadcast schedule UTC XII Turning the Unit On/Off OperationOperating Controls Display unit, front viewAdjusting LCD Dimmer All message display 518 kHzSAR Search and Rescue message Confirming the New MessageOther messages Sample Messages Message list Detailed messageMenu Choosing the Receive ModeSystem Display Service AutoLocal channel options Editing the Settings for Station and MessageChoosing the Local Frequency Rcv Station & MsgMessage Rcv Station & Msg AutoStation Edit window ex. Rcv Station & MsgAlarm Messages Switching the Frequency to Display518 Press 490 List options Processing MessagesChoosing messages to display Urgent messageProtecting message from deleting Alarm Messages User Messages Good Messages Lock MessagePrinting Messages Printing all messages displayedPrinting each message Canceling printingOff All Printing messages automatically518kHz Editing the Navtex Station ListINS Output Speed NavArea490kHz ID1 ID2 ID3 4209.5kHz Latitude 00NLongitude 00E 518kHz ID1 ID2 ID3 Range 400nm Save data ?Latitude 11N OostendeStation Oostende Longitude 48E 518kHz ID1 T ID2 ID3Icon Status Meaning Status icon shown at the tip of display IconsMessage icon shown next to messages Messages List Message Meaning RemedyNavtex menu Other FunctionsSystem menu Nav Data Display menu Description SettingSkips to $$ DistanceService menu Description Setting INSThis page is intentionally left be blank Maintenance program Maintenance & TroubleshootingMaintenance Check point RemedyFuse Replacement of Fuse, Battery and Thermal PaperBattery LCD DisplayThermal paper NX-700A only Troubleshooting SELET/READYMemory test DiagnosticsKey test Restoring all Default Settings Rx testDisplay Unit InstallationTabletop, overhead mounting For NX-700A Flush mountingFor NX-700B General mounting considerations Receiver UnitMounting Method Antenna Unit Mounting considerationsWiring Printer NX-700B onlyReceiver unit Receiver unit, inside viewHow to use J402 and 403 connector TTYCS-1Q For Navigator or INSAntenna cable For RG-10/UY, RG-214 cableExtending antenna cable length OP04-2 To Receiver unit FMA-1 connectorGrounding None Setting of PrinterSystem Upright InvertedDigital Interfacing PriorityGLL Latitude and longitude RMC Recommend Minimum Specific Gnss Data ZDA Time and date NRQ Request Navtex messages NMK Set Navtex mask$--ACK,xxx*hhCRLF Local alarm numberidentifier Checksum ACK AcknowledgeVHW Water speed and heading VTG Course over ground and ground speedVBW Dual ground/water speed Output data description NRX New Navtex received message ALR Set alarms Serial InterfaceMenu Tree NavtexFuruno Specifications of Navtex Receiver Furuno ＰａｃｋｉｎｇＬｉｓｔ NX-700B/NX-700B-HK/NX-700B-R NX-7001-AN*/BN*/-R NX-7001-AA-*/BA NX-7H-0-10/-10-HK,NX-7H-0-20/-20-HK 工事材料表 004-514-530 08AW-X-9402 004-514-540 08AW-X-9403 Installation Materials 004-514-610 08AW-X-9404 Spare Parts List for Page Page Page Page Page 取付位置 NX-700A/B Index Processing0560