Flame for Testing | Bradford-White Corp 44219J, 238-44219-00J

Gas Connections

The gas supply lines must meet all requirements of the National Fuel Gas Code (ANSI Z223.1-Latest Edition), or in Canada CAN/CGA B149.1 Natural Gas Installation Code (Latest Edition) or CAN/CGA B149.2 Propane Installation Code (Latest Edition).

The minimum permissible gas supply pressure for the purpose of input adjustment is one (1.0) inch (0.25 kPa) water column above the operating manifold pressure. See the rating plate and gas valve for the manifold pressure and gas type. The maximum permissible gas supply pressure is fourteen (14.0) inches (3.5 kPa) water column for natural gas and liquefied petroleum gases/propane gas.

1.Connect this water heater only to the type of gas (Natural or Propane gas) as shown on the rating plate. Use clean black iron pipe or equivalent material approved by local codes and ordinances. (Dirt and scale from the pipe can enter the gas valve and cause it to malfunction). The inlet gas line must have a minimum length of three (3) inches (7.6 cm) drip leg (sediment trap) installed as close to the water heater’s gas valve as possible. A ground joint union must be installed as close to the water heater as possible in the gas supply line feeding the water heater to permit servicing of the water heater. Compounds used on the threaded joints of the gas piping must be resistant to the action of liquefied petroleum gases/propane gas. DO NOT apply pipe dope to the gas valve inlet and make certain that no pipe dope has become lodged in the inlet screen of the gas valve. Extreme care must be taken to ensure no pipe dope enters the gas valve. Avoid excessive torque when tightening the gas supply line to the gas valve. Excessive torque may result in cracking of the gas valve housing and could create a gas leak. When tightening gas supply line to L.P. control, it is recommended to hold the inlet body of the control securely with an adequate wrench. The suggested maximum torque is 31.5 ft. lbs. (4.4 kg-m).

WARNING

The manufacturer of this water heater will not be liable for any damage or injury caused as a result of a cracked gas inlet as a result of excessive torque.

2.This water heater and its gas connection must be leak tested before placing the water heater in operation. Check for gas leaks with a soap and water solution and a brush or a commercial leak detector fluid. NEVER USE A MATCH OR OPEN

FLAME FOR TESTING!

CAUTION

The water heater and individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of the system at test pressures in excess of 1/2 psi (3.5 kPa). The water heater must be isolated from the gas supply piping system by closing its manual shutoff valve during any pressure testing of the gas supply system at test pressures equal to or less than 1/2 psi (3.5 kPa). The supply line must be capped when not connected to the water heater.

3.While checking for leaks care must be taken to prevent solution from

contacting the electrical connections at the control. If electrical connections at the control become wet, they must be thoroughly dried before attempting to operate the water heater.

44219J, 238-44219-00J specifications

Bradford White Corp is a well-respected name in the water heating industry, known for producing high-quality products designed for durability and efficiency. Among its extensive range of water heaters is the model 238-44219-00J,44219J, which stands out for its impressive features and advanced technologies.

The 238-44219-00J model is a gas water heater that offers high performance and reliability. One of its main characteristics is its heavy-duty, glass-lined tank that enhances corrosion resistance, ensuring a longer lifespan. With a capacity designed to meet the demands of residential and commercial applications alike, this unit is ideal for various hot water needs.

This model incorporates Bradford White's innovative Hydrojet Total Performance System, which enhances the overall efficiency and performance of the water heater. This system includes a specially designed dip tube, which promotes better circulation and minimizes sediment buildup, ultimately leading to improved heating efficiency. The result is quicker recovery rates and a more consistent supply of hot water.

Another notable feature of the 238-44219-00J is its precise temperature control, which is made possible by the advanced gas control system. This control allows users to easily set and maintain their desired water temperature, reducing the risks of scalding and increasing comfort.

The water heater is also equipped with the Defender Safety System, which provides a range of safety features to protect users and properties. This system includes a flame arrestor design, which prevents ignition of flammable vapors, enhancing the overall safety profile of the unit. Additionally, the heater comes with a built-in diagnostics system that alerts users to any performance issues, facilitating timely maintenance.

In terms of installation, this model is designed with flexibility in mind. It can be vented using either direct vent or atmospheric vent systems, allowing for easy integration into various building designs. Its compact size makes it a suitable choice for tight spaces without sacrificing performance.

In summary, the Bradford White Corp 238-44219-00J,44219J gas water heater showcases a blend of durability, efficiency, and advanced technology. With its robust construction, high-performance features, and safety systems, it represents a reliable choice for those in need of a dependable hot water solution. The model exemplifies Bradford White's commitment to delivering innovative and efficient water heating solutions for both residential and commercial customers.