Maintenance

WARNING

Water heaters are heat producing appliances. To avoid damage or injury there shall be no materials stored against the water heater or vent-air intake system, and proper care shall be taken to avoid unnecessary contact (especially by children) with the water heater and vent-air intake system.

UNDER NO CIRCUMSTANCES SHALL FLAMMABLE MATERIALS, SUCH AS GASOLINE OR PAINT THINNER BE USED OR STORED IN THE VICINITY OF THIS WATER HEATER, VENT-AIR INTAKE SYSTEM OR IN ANY LOCATION FROM WHICH FUMES COULD REACH THE WATER HEATER OR VENT-AIR INTAKE SYSTEM.

IMPORTANT

The water heater should be inspected at a minimum annually by a qualified service technician for damaged components and/or joints not sealed. DO NOT operate this water heater if any part is found damaged or if any joint is found not sealed.

The following maintenance should be performed by a qualified service technician at the minimum periodic intervals suggested below. In some installations, the maintenance interval may be more frequent depending on the amount of use and the operating conditions of the water heater. Regular inspection and maintenance of the water heater and vent-air intake system will help to insure safe and reliable operation.

1.Annually check the operation of the thermostat.

2.The flow of combustion and ventilation air MUST NOT be restricted. Make sure slots in jacket are open and unobstructed. Clear jacket slot openings of any dirt, dust, or other restrictions. WARNING! The ventilation air system may be HOT.

3.At all times keep the water heater area clear and free from combustible materials, gasoline and other flammable vapors and liquids.

4.Bi-annually conduct a visual check of the main and pilot burner flames to determine that they are burning properly. See Burner Flame Check section of this installation and operation manual. If sooting or other burner anomalies are evident, shut down the water heater by turning off the gas per the instructions listed in this manual or as listed on the water heater.

5.Annually remove the inner door and main burner assembly to clean orifices and related parts of any dirt or other foreign material. Inspect the burner ports for obstructions or debris and clean with a wire brush as needed. Wire brush and/or vacuum clean the combustion chamber as needed to remove scale deposits and debris. NOTE: It is imperative for proper operation of the water heater that the inner door be replaced in the original location, making certain the resetable thermal switch is properly connected to the gas control wire leads provided.

44219J, 238-44219-00J specifications

Bradford White Corp is a well-respected name in the water heating industry, known for producing high-quality products designed for durability and efficiency. Among its extensive range of water heaters is the model 238-44219-00J,44219J, which stands out for its impressive features and advanced technologies.

The 238-44219-00J model is a gas water heater that offers high performance and reliability. One of its main characteristics is its heavy-duty, glass-lined tank that enhances corrosion resistance, ensuring a longer lifespan. With a capacity designed to meet the demands of residential and commercial applications alike, this unit is ideal for various hot water needs.

This model incorporates Bradford White's innovative Hydrojet Total Performance System, which enhances the overall efficiency and performance of the water heater. This system includes a specially designed dip tube, which promotes better circulation and minimizes sediment buildup, ultimately leading to improved heating efficiency. The result is quicker recovery rates and a more consistent supply of hot water.

Another notable feature of the 238-44219-00J is its precise temperature control, which is made possible by the advanced gas control system. This control allows users to easily set and maintain their desired water temperature, reducing the risks of scalding and increasing comfort.

The water heater is also equipped with the Defender Safety System, which provides a range of safety features to protect users and properties. This system includes a flame arrestor design, which prevents ignition of flammable vapors, enhancing the overall safety profile of the unit. Additionally, the heater comes with a built-in diagnostics system that alerts users to any performance issues, facilitating timely maintenance.

In terms of installation, this model is designed with flexibility in mind. It can be vented using either direct vent or atmospheric vent systems, allowing for easy integration into various building designs. Its compact size makes it a suitable choice for tight spaces without sacrificing performance.

In summary, the Bradford White Corp 238-44219-00J,44219J gas water heater showcases a blend of durability, efficiency, and advanced technology. With its robust construction, high-performance features, and safety systems, it represents a reliable choice for those in need of a dependable hot water solution. The model exemplifies Bradford White's commitment to delivering innovative and efficient water heating solutions for both residential and commercial customers.