3. Web Server Quick Guide
3
Illustration 3.7: Step 6 of 7: Replication
Step 7 of 7: Inverter startup
The inverter will start automatically when the installation sequence is complete (see the Protect PV Installation Manual), and solar radiation is sufficient.
The startup sequence, including
Illustration 3.8: Step 7 of 7: Inverter startup
To change the setup later, access the inverter via the integrated web interface or the display, at inverter level.
•To change the name of the inverter, go to [Setup → Inverter details]
•To enable master mode, go to [Setup → Inverter details]
3.4.Operation
3.4.1.Web Server Structure
The Web Server overview is structured as follows.
8000038784_00_BAL_en / | 17 |