AEG 8000038784_00_BAL_en user manual Display

2. Display

Menu Structure - Setup - Continued
Display Functions			Description
	GPRS connection setup
		SIM PIN code: 0000	4-8 characters
		Access point name:
				2
		name	Max. 24 characters
		User name:
		user	Max. 24 characters
		Password:
		password	Max. 24 characters
		Roaming: Disabled
	[-] Data warehouse service
		Upload channel: LAN
		Upload time (h:m): 14:55
		Start log upload	Requires data from at least 10 min. of energy production
		D.W FTP server address:
		www.inverterdata.com
		D.W server port: 65535
		FTP mode: Active
		D.W. server user name:	Default serial number of the inverter
		User	User name for Data warehouse account, max. 20 chars.
		D.W server password
		Password	Password for Data warehouse account, max 20 chars.
[-] Autotest			Initiate autotest, only applicable with country setting; Italy
	Status: Off
	Ugrid: 234 V		Only visible during voltage tests
	Utest: 234 V		Only visible during voltage tests
	Fgrid: 50.03 Hz		Only visible during frequency tests
	Ftest: 50.03 Hz		Only visible during frequency tests
	Disconnection time: 53 ms		Not visible in Off and Completed OK states
[-] Logging
	Interval: 10 min*		The interval between each logging
	Logging capacity:
	10 Days
[-] Web Server
	Reset password		Resets the password of the Web Server to its default value
[-] Security
	Password: 0000		Level of access to inverter parameters and settings
	Security level: 0		Current security level
	Log out		Log out to security level 0
	[-] Service logon		Only to be used by authorised service personnel
		User name:
		user name
		Password:
		password

Table 2.8: Setup - Continued

*) Not available.

Note:

When a value is set in the S0 energy meter calibration menu the inverter disables its own energy counter in order to show the value from the S0 meter. Therefore the energy count will not be shown if a value is set, even though no S0 meter is connected.

8000038784_00_BAL_en / L00410565-01_02 11