Genie 2022, 2042, 2024 manual Belt

Page 10

Rail Assembly for CHAIN DRIVE OPENER

NOTE: For split rail clamps, nuts, and bolts locate Bag 0 from Box 1.

3.Remove the two rail sections that are not connected to the chain and place them on floor (Fig. 1-2, A).

4.Carefully remove the third rail section with chain and plastic sleeve. Place rail section on floor and extend chain straight out

(Fig. 1-2, B). Chain and rail should extend approximately 7 feet.

5.Remove wire ties and plastic bag from chain. Leave chain extended straight out on floor. Avoid kinks in the chain by careful handling and keeping chain flat on the floor.

6.Align the three rail sections by pulling the chain straight and wrapping it around the chain tensioner pulley (Fig. 1-3 & 1-4).

7.Attach the two rail clamps to the rail section joints with (4) bolts and nuts. After both rail clamps have been assembled to the rail sections, securely tighten the bolts and nuts.

Rail Assembly for BELT DRIVE OPENER

NOTE: For split rail clamps, nuts, and bolts locate Bag 0 from Box 1.

3.Remove the two rail sections that are not connected to the belt and place them on floor (Fig. 1-2, A).

4.Carefully remove the third rail section with belt. Place rail section on floor, remove ties on belt and extend belt straight out (Fig. 1-2, B). Avoid twists and kinks in the belt by careful handling and keeping belt flat on the floor. Belt and rail should extend approximately 7 feet.

5.Align the three rail sections by pulling the belt straight and wrapping it around the tensioner pulley (Fig. 1-3 & 1-4).

6.Attach the two rail clamps to the rail section joints with (4) bolts and nuts. After both rail clamps have been assembled to the rail sections, securely tighten the bolts and nuts.

CHAIN DRIVE RAILS

 

A

Chain Rail

Center Rail

 

 

End Rail

 

B

Wire Tie(s)

 

 

 

BELT DRIVE RAILS

 

 

Belt Rail

 

A

 

Center Rail

 

 

 

 

End Rail

B

 

 

FIG. 1-2 Split Rail sections.

 

 

Carriage Assembly

 

CHAIN

Rail with chain

 

 

Rail Clamps

 

 

 

 

 

Rail Clamp Bolts

 

 

 

 

Release

 

 

 

Knob

 

 

End Rail

Rail Clamp Nuts

 

 

 

 

 

 

 

Rail Clamps

Tensioner

Center Rail

 

Pulley

 

 

 

 

 

Rail Clamp Bolts

 

 

Chain

 

 

 

 

End Rail

 

Header

Clevis Pin, Long

 

 

& Cotter Pin

 

 

Bracket

 

Tensioner

Center Rail

 

 

 

 

Pulley

BELT

 

 

Belt

 

Header

Clevis Pin, Long

 

 

Bracket

& Cotter Pin

 

Wrap around tensioner pulley

FIG. 1-4 Mount chain/belt to tensioner pulley.

10

PN 37026501206 01/27/2012

 

Image 10
Contents Models 2022/2024/2042 Safety Information Opener Features Table of ContentsSafety Features Must be added to these type doors. If this is Check the wall directly above the garageIs your sectional garage door made With a bracing kit. Refer to SectionTypical Sectional Door Installation Recommended Tools Parts Identification Not Shown Full SizeDo not Return to Point of Purchase Chain Piece Rail Hardware Assembled ViewImportant Installation Instructions Pener AssemblyBelt Assembly for Chain Drive Opener Finding header bracket mounting location Opener Installation Header and Door Mounting BracketsDo not move door spring Mounting the header bracket Mounting the Opener Mounting the assemblyGetting started Install Door Arms Door Bracket2b. Wiring If not pre-wired Wall Console Installation2a. Wiring If pre-wired Wall Console locationSecurely fasten wires Do not install rear cover yet Mounting3a. Wiring If not pre-wired AFE-T-BEAMSYSTEM InstallationMounting Safe-T-BeamSource Red LED and Sensor Green LED 3b. Wiring pre-wired Route wire from wall to Safe-T-Beamsensors -5bWith Power Supplied Onnecting to PowerWith Permanent Wiring With Grounded PlugOOR Limits Setting & Testing OPEN/CLOSE LimitsClose Travel Limit Carriage Lock Keyed Emergency Release Operation InstructionsUP/DOWN Force TestingAdjustment Erase OPEN/CLOSE Travel LimitRogramming Remote Controls Lost or Stolen RemoteLight BULB/LENS Installation Emote ControlDoor balance MaintenanceRoutine Monthly Maintenance Contact reverseCircuit Wiring Diagram Advertencia AvertissementTroubleshooting Guide Operation Problem What to doTroubleshooting Guide Power Head LED Possible Problem SolutionTransmitter Compliance Statement
Related manuals
Manual 68 pages 928 b

2024, 2042, 2022 specifications

Genie is a multi-faceted entertainment platform that has continually evolved since its inception. In 2022, Genie introduced significant updates that enhanced user experience, enabling content personalization through advanced algorithms. Users could access a vast library of shows, movies, and user-generated content tailored to their preferences. The interface saw an overhaul, featuring a sleek design that provided seamless navigation.

Cloud technology played a key role in Genie’s architecture, allowing users to access their content from any device. The transition to Adaptive Streaming Technology (AST) ensured that users experienced high-quality video regardless of their internet speed. Furthermore, Genie integrated social features, where users could share their favorite content, creating a community-driven environment.

By 2024, Genie had further capitalized on Artificial Intelligence (AI) and Machine Learning (ML) to refine its recommendation engine. The platform not only suggested content based on viewing histories but also analyzed social media trends to predict what users might enjoy next. With the introduction of GenieCast, users could share real-time reactions while watching content with friends, no matter their location.

In 2042, Genie transformed into an immersive entertainment ecosystem. The focus on Virtual Reality (VR) and Augmented Reality (AR) technologies allowed users to engage in interactive storytelling experiences. Users could step into the worlds of their favorite shows and movies, becoming part of the narratives. The integration of 360-degree video technology provided a fully immersive viewing experience.

Additionally, Genie’s partnership with various content creators ensured a rich array of exclusive content, appealing to diverse tastes. Enhanced security measures protected user data, ensuring privacy in this interconnected landscape. The collaboration with smart home devices allowed seamless integration, enabling voice-activated controls and personalized content delivery.

Overall, Genie’s evolution from 2022 through 2042 exemplifies the entertainment industry's shift towards user-centric experiences, advanced technologies, and interactive content delivery. With each iteration, Genie has solidified its position as a leader in the entertainment space, continually redefining how audiences engage with media. As technology progresses, users can anticipate even more innovative features that enhance their viewing experiences.