Harman-Kardon HS 250 Rear Panel Connections, FM Antenna Connect to the supplied FM antenna

Page 9

Rear Panel Connections

￿

￿

￿ ￿ ￿ ￿

￿

￿ ￿

ENGLISH

￿ ￿

￿ ￿ ￿ ￿ ￿ ￿

￿ ￿

￿

 

￿Composite Video Output

￿S-Video Output

￿Component Video Outputs

￿Scart TV Output

￿AC Power Cord

￿FM Antenna

￿Audio In

￿Composite Video Output: Connect this jack to the video input on a television or video projector.

￿S-Video Output: Connect this jack to the S-Video input on a television or video projector.

￿Component Video Outputs: These out- puts carry the component video signals for connection to display monitors with component video inputs. For standard analog TV's or projectors with inputs marked Y/Pr/Pb or Y/Cr/Cb, connect these outputs to the correspon- ding inputs. If you have a high-definition televi- sion or projector that is compatible with high scan rate progressive video, connect these jacks to the “HD Component” inputs. Note that if you are using a progressive scan display device, then ”Progressive” must be selected in the Video Set- up Menu in order to take advantage of the progressive scan circuitry. See page 20 for more information on progressive scan video.

IMPORTANT: These jacks should NOT be con- nected to standard composite video inputs.

￿SCART OUT (TV): If your TV has a SCART socket, you can connect a SCART cable to your TV and to your DVD Player for improved video quality. The SCART cable carries both audio and video. You can select Composite Video or RGB video for that SCART connector’s video output signal.

￿Subwoofer Output

￿Coaxial Digital Input

￿Optical Digital Input

￿Analog Audio Outputs

￿Front Speaker Outputs

￿Remote IR Input

￿TV Audio In

￿AC Power Cord: Connect this plug to an AC outlet. If the outlet is controlled by a switch, make certain that it is in the ON position.

￿FM Antenna: Connect to the supplied FM antenna.

￿Audio In: Connect to a line-level analog audio source: TV, tape player, Minidisc, PC, etc.

￿Subwoofer Output: Connect to the SUB/LFE input on the subwoofer.

￿Coaxial Digital Input: Connect the coax digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source. Do not connect the RF digi- tal output of an LD player to these jacks.

￿Optical Digital Input: Connect the optical digital output from a DVD player, HDTV receiver, LD player, MD player, satellite receiver or CD player to this jack. The signal may be either a Dolby Digital signal, DTS signal or a standard PCM digital source.

￿Analog Audio Outputs: Connect these jacks to the analog audio input on a TV set or external audio system for analog audio playback or to the RECORD/INPUT jacks of an audio recorder for recording.

￿Coaxial Digital Output

￿Subwoofer Trigger Output

￿USB On-The-Go Input

￿HDMI Output

￿Remote IR Output

￿ DMP Connector

￿Front Speaker Outputs: Connect these outputs to the matching + or – terminals on your left and right speakers. In conformance with the new CEA color code specification, the White terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on Front Left speaker with the older color coding, while the Red terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on Front Right speaker. Connect the black (–) terminals on the HS to the black (–) terminals on the speakers. See page 14 for more information on speaker polarity.

￿Remote IR Input: If the HS 250’s front- panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack.

REAR PANEL CONNECTIONS 9

Image 9
Contents HS 250 Home Cinema System Declaration of Conformity Table of ContentsIntroduction Important Safety Information Introduction / Safety InformationTerminology TerminologyThis information is compressed DivXFeatures Front Panel Controls Power On/Off Standby Headphone Jack Eject Volume Control Main Information Display USB On-The-Go Input Eject Press this button to release a disc from the loaderFVideo Format Indicators Disc Type IndicatorsLights when a disc is playing in the normal mode Lights when the disc is pausedFM Antenna Connect to the supplied FM antenna Rear Panel ConnectionsRear Panel Connections Clear Button Remote ControlB Button Press to select section A-B and to play repeatedly Mute Button Mutes the soundBasic Information About This ManualRegional Coding Connecting the TV and optional components Installation and ConnectionsAudio Equipment Connections Video Equipment ConnectionsOptional Audio Connections Speaker PlacementDisc Playback Features Connecting the AC PowerFirst Turn On Basic PlaySlow Motion Playback with DVD only Surround ModeAbout DivX Movie Files Playing a DivX Movie DiscSystem Defaults System SetupSet Up Menu System SettingsAudio Adjustment Audio SettingsFeel free to experiment with the settings at any time Output level adjustmentVideo Adjustment Video SettingsPress the Video Output Button on the remote control DivX Video On DemandTV Picture Adjustment with Test Screen Test ScreenTest Screen Player/Radio Menu Auto Preset function Surround Mode for TunerRDS Station ID Surround Mode Chart Dolby Digital signals will be down-mixed toTV Menu, AUX Menu, Digital in Menu Using Random Activates Random Playback when possi- bleUSB Menu Learning Codes from a Remote Learning Codes from a RemoteErasing Learned Codes Macro ProgrammingWhen the Program Indicator Erasing Macro CommandsDVD Language Codes Macro has been erasedTroubleshooting Subtitle language cannot be changed when you play a DVD Audio language cannot be changed when you play a DVDSubtitles cannot be turned off when you play a DVD Angles cannot be changed when you play a DVDGlossary HS 250 Controller Specifications Harman Consumer Group, Inc