Harman-Kardon HS 250 owner manual Rear Panel Connections

Page 10

Rear Panel Connections

TV Audio Input: If your screen is connected to the HS by an HDMI, Component, S-Video or Composite cable, connect the analog output of your TV to this input. If you have your TV connected to the HS with a Scart cable, an audio connection to the TV Input is not necessary.

Note: You’ll find more details about all Audio/Video connections under Setup and Connections on the following pages.

Coaxial Digital Output: Connect this jack to the matching digital input connector on a digital recorder such as a CD-R or MiniDisc recorder.

Subwoofer Trigger Output: Connect this trigger output to the trigger input of the Harman Kardon subwoofer, so that the subwoofer will switch on and off at the same time as the rest of the system.

USB On-The-Go Input: This input may be used to temporarily connect a USB thumb device or portable hard disk for direct playback of audio, image of video files, a digital photo camera or a USB hub.

HDMI Output: Connect this output to the HDMI input of high-definition LCD, Plasma or video projector for the best possible picture quality.

Remote IR Output: This connection permits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the “IR IN” jack on Harman Kardon or other compatible equipment.

Digital Media Player (DMP) Connector: With the HS 250 turned off, con- nect one end of the optional Harman Kardon

to this proprietary connector, and the other to your compatible Apple iPod. When the Digital Media Player source is selected, you may view your iPod’s control and navigation messages on your video display (if one is connected to one of the Video Monitor Outputs ), and in the Upper and Lower Display Lines E. You may navi- gate the iPod and select tracks for playback using the ⁄/¤/‹/› Buttons 9 and the Set Button 6.

10REAR PANEL CONNECTIONS

Image 10

Contents HS 250 Home Cinema System Table of Contents Declaration of ConformityIntroduction Introduction / Safety Information Important Safety InformationThis information is compressed TerminologyTerminology DivXFeatures Main Information Display USB On-The-Go Input Power On/Off Standby Headphone Jack Eject Volume ControlFront Panel Controls Eject Press this button to release a disc from the loaderLights when a disc is playing in the normal mode Disc Type IndicatorsFVideo Format Indicators Lights when the disc is pausedRear Panel Connections FM Antenna Connect to the supplied FM antennaRear Panel Connections Remote Control Clear ButtonMute Button Mutes the sound B Button Press to select section A-B and to play repeatedlyAbout This Manual Basic InformationRegional Coding Audio Equipment Connections Installation and ConnectionsConnecting the TV and optional components Video Equipment ConnectionsSpeaker Placement Optional Audio ConnectionsFirst Turn On Connecting the AC PowerDisc Playback Features Basic PlayAbout DivX Movie Files Surround ModeSlow Motion Playback with DVD only Playing a DivX Movie DiscSet Up Menu System SetupSystem Defaults System SettingsFeel free to experiment with the settings at any time Audio SettingsAudio Adjustment Output level adjustmentPress the Video Output Button on the remote control Video SettingsVideo Adjustment DivX Video On DemandTest Screen TV Picture Adjustment with Test ScreenTest Screen Player/Radio Menu Surround Mode for Tuner Auto Preset functionRDS Station ID Dolby Digital signals will be down-mixed to Surround Mode ChartTV Menu, AUX Menu, Digital in Menu Random Activates Random Playback when possi- ble UsingUSB Menu Erasing Learned Codes Learning Codes from a RemoteLearning Codes from a Remote Macro ProgrammingDVD Language Codes Erasing Macro CommandsWhen the Program Indicator Macro has been erasedTroubleshooting Subtitles cannot be turned off when you play a DVD Audio language cannot be changed when you play a DVDSubtitle language cannot be changed when you play a DVD Angles cannot be changed when you play a DVDGlossary HS 250 Controller Specifications Harman Consumer Group, Inc