Harman-Kardon HS 250 Front Panel Controls,  Main Information Display USB On-The-Go Input

Page 7

Front Panel Controls

ENGLISH

 Main Information Display

3 USB On-The-Go Input

6 Slot Loader

1 Power On/Off (Standby)

4 Headphone Jack

 

2 Eject

5 Volume Control

 

Main Information Display: This display delivers messages and status indications to help you operate the HS 250 Controller.

1Power On/Off (Standby): Press the button once to turn the HS 250 Controller on, press it again to put the unit in the Standby mode.

Note that when the HS 250 Controller is switched on, the Power Indicator around the button turns white.

2Eject: Press this button to release a disc from the loader.

3USB On-The-Go Input: This input may be used to temporarily connect a USB thumb device or portable hard disk for direct playback of audio, image of video files or a USB hub. The USB inputs are designed to power a single USB device at a time. If additional hard disks are connected through a hub it is necessary that additional external power supplies are used to power the hub and hard disks.

4Headphone Jack: This jack may be used to listen to the system's output through a pair of headphones. Be certain that the headphones have a standard 3.5 mm stereo phone plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use.

5Volume Control: Turn this knob clockwise to increase the volume, counterclockwise to decrease the volume. If the system is muted, adjusting volume control will automatically release the unit from the silenced condition.

6Slot loader: Gently insert a CD or DVD into this slot, with the printed side of the disc facing up. Note there is no drawer. Press the Eject Button 2 to release the disc.

FRONT PANEL CONTROLS 7

Image 7
Contents HS 250 Home Cinema System Declaration of Conformity Table of ContentsIntroduction Important Safety Information Introduction / Safety InformationDivX TerminologyTerminology This information is compressedFeatures Eject Press this button to release a disc from the loader Power On/Off Standby Headphone Jack Eject Volume ControlFront Panel Controls  Main Information Display USB On-The-Go InputLights when the disc is paused Disc Type IndicatorsFVideo Format Indicators Lights when a disc is playing in the normal modeFM Antenna Connect to the supplied FM antenna Rear Panel ConnectionsRear Panel Connections Clear Button Remote ControlB Button Press to select section A-B and to play repeatedly Mute Button Mutes the soundAbout This Manual Basic InformationRegional Coding Video Equipment Connections Installation and ConnectionsConnecting the TV and optional components Audio Equipment ConnectionsOptional Audio Connections Speaker PlacementBasic Play Connecting the AC PowerDisc Playback Features First Turn OnPlaying a DivX Movie Disc Surround ModeSlow Motion Playback with DVD only About DivX Movie FilesSystem Settings System SetupSystem Defaults Set Up MenuOutput level adjustment Audio SettingsAudio Adjustment Feel free to experiment with the settings at any timeDivX Video On Demand Video SettingsVideo Adjustment Press the Video Output Button on the remote controlTest Screen TV Picture Adjustment with Test ScreenTest Screen Player/Radio Menu Surround Mode for Tuner Auto Preset functionRDS Station ID Dolby Digital signals will be down-mixed to Surround Mode ChartTV Menu, AUX Menu, Digital in Menu Random Activates Random Playback when possi- ble UsingUSB Menu Macro Programming Learning Codes from a RemoteLearning Codes from a Remote Erasing Learned CodesMacro has been erased Erasing Macro CommandsWhen the Program Indicator DVD Language CodesTroubleshooting Angles cannot be changed when you play a DVD Audio language cannot be changed when you play a DVDSubtitle language cannot be changed when you play a DVD Subtitles cannot be turned off when you play a DVDGlossary HS 250 Controller Specifications Harman Consumer Group, Inc