Chamberlain 120ad, 1160 Wiring Instructions for Accessories, Install the Light, KEY Switch Model

Page 18

WARNING

To prevent possible SERIOUS INJURY or DEATH from electrocution:

•Be sure power is not connected BEFORE installing door control.

To prevent possible SERIOUS INJURY or DEATH from a closing garage door:

•Install door control within sight of garage door, out of reach of children at a minimum height of 1.5m, and away from all moving parts of door.

•NEVER permit children to operate or play with door control push buttons or remote control transmitters.

•Activate door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.

•ALWAYS keep garage door in sight until completely closed. NEVER permit anyone to cross path of closing garage door.

WIRING INSTRUCTIONS FOR ACCESSORIES

•Place entrapment warning label on the inside of door as a reminder of safe operating procedures. Place the manual release/safety reverse test label in plain view on the inside of the garage door.

KEY SWITCH MODEL 059009

To opener terminal: white to 2; white/red to 1.

SAFETY INFRARED REVERSING SENSOR MODEL 062153

To opener terminal screws: white to 2; Black to 3.

DOOR CONTROL PANEL 062159

To opener terminal: white to 2; white/red to 1.

INSTALLATION STEP 7

Install the Light

•Press the release tabs on both sides of lens. Gently rotate lens back and downward until the lens hinge is in the fully open position. Do not remove the lens. Install a 40 watt maximum (socket size E27), light globe in the socket as shown.

•The light will turn on and remain lit for 2-1/2 minutes when power is connected. After 2-1/2 minutes it will turn off.

•Reverse the procedure to close the lens.

Replace burned out globes with rough service light globes.

40W Max

Light Globe

Release tabs of lens

Socket

114A2845

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents With 433MHz Radio Controls Table of Contents IntroductionTools needed Testing Your DoorPreparing your garage door Sectional DoorSectional Door Installations PlanningOpener ARM Mounting Location OFF Centre Installation of Opener ONE-PIECE Door InstallationsOne-Piece Door with Track One-Piece Door without Track Carton Inventory Installation Hardware InventoryAssemble the Rail Assembly StepInstall the Chain Insert Chain into Rail & Assemble Header SleeveAttach Chain Spreader Fasten Rail to Opener & Install ChainAttach Trolley to Rail Set Chain TensionInstall Chain Noise Reduction Pads optional Important Installation Instructions InstallationSectional Door ONE-PIECE Door with Track Installation StepDetermine the Header Bracket Location Proceed to ,One-piece door without track jamb hardware ONE-PIECE Door Without TrackExample One-piece door without track pivot hardwareInstall the Header Bracket Wall Header Bracket InstallationCeiling Header Bracket Installation Attach the Rail to the Header Bracket Position the OpenerSectional Door or ONE-PIECE Door with Track Hang the Opener Install the door control Remote Control Wall Mount optionalKEY Switch Model Wiring Instructions for AccessoriesInstall the Light Safety Infrared Reversing Sensor ModelConnect Electric Power Attach the Emergency Release Rope and HandleInstall the Safety Infrared Reversing Sensors Optional Important Information about Safety Reversing SensorsFacing the door from inside the garage Sectional Doors Metal, insulated or light weight factory reinforced doorsFasten the Door Bracket Wood DoorsONE-PIECE Doors Not ProvidedConnect Door Arm to Trolley Sectional Doors onlyAssemble the Door Arm Adjustment Procedures for One-Piece DoorsALL ONE-PIECE Doors Connect the door arm to the trolleyAdjustment Step Limit AdjustmentAdjust the Force Adjust Test the Safety Reverse SystemTest the Safety Infrared Reversing Sensors if installed Important Safety CheckOperation Using Your Garage Door OpenerWhen the opener is activated Activate your opener with any of the followingOnce a Month To Open the Door ManuallyCare of Your Opener Twice a YearTroubleshooting Opener doesnt operate from either door control or remoteTo Erase All Codes From Opener Receiver Memory To Code a Hand-held Remote Control TransmitterProgramming Multi-Function RemotesWarranty

1155, 1156, 1140, 1150, 80ad specifications

The Chamberlain 1160JG, 1160, 1146, 120AD, and 1145 garage door openers are some of the most reliable and feature-rich options available in today’s market. These models are renowned for their robust performance, user-friendly interface, and advanced technology, making them a top choice for homeowners seeking convenience and security.

The Chamberlain 1160JG and 1160 models stand out with their powerful DC motor, which ensures a smooth and quiet operation. They are designed for faster opening speeds, allowing users to enter and exit the garage quickly. One of the prominent features of these models is the built-in myQ technology, which enables remote access and control via smartphone applications. Users can monitor their garage door status, receive alerts, and operate the door from virtually anywhere, enhancing convenience and peace of mind.

The Chamberlain 1146 model combines strength and reliability, equipped with a durable chain drive system. This model offers exceptional lifting power, making it suitable for heavy garage doors. The 1146 also includes a battery backup system, ensuring functionality even during power outages. Its safety features, including infrared sensors, help prevent accidents by detecting obstructions in the door's path.

The Chamberlain 120AD model is particularly appreciated for its easy installation process. This model features a belt drive system, which provides quieter operation compared to chain-driven alternatives. This makes the 120AD an excellent choice for homes with living spaces adjacent to the garage. It also includes built-in Wi-Fi, enabling smart home integration and remote access through the myQ app.

The Chamberlain 1145 model is a compact yet powerful option that maintains high reliability. It offers a strong chain drive system and a variety of safety features, including rolling code technology that enhances security by changing the access code after every use. The 1145 is ideal for families looking for a cost-effective yet dependable solution.

Overall, the Chamberlain 1160JG, 1160, 1146, 120AD, and 1145 garage door openers not only bring convenience through advanced technology but also prioritize safety, making them an excellent investment for any homeowner. Their blend of performance, durability, and smart technology ensures that users benefit from a hassle-free garage door experience.
Top Page Image Contents