Chamberlain MT60P Setting the Force, Setting the limits, Complete your installation refer section

Page 13

ADJUSTMENT SECTION

22 SETTING THE LIMITS

1

Travel limits regulate the points at which the door will stop

2

when moving up or down. Follow the steps below to set

 

the limits.

3

 

NOTE: The door must be in the mid or closed position to begin setting the limits.

Setting the limits:

1.Press and hold the black button (1) until the yellow indicator (3) light starts flashing slowly then release.

2.Adjust the position of the door to the desired UP position by using the black button. Black (1) moves the door UP (open) and orange (2) moves the door DOWN (close). Check to be sure the door opens high enough for your vehicle to pass under.

3.Push the transmitter or door control. This sets the UP (open) limit and begins closing the door.

Immediately press either the orange or the black button. The door will stop.

4.Adjust the desired DOWN (close) limit position using the black and orange buttons. Check to be sure the

door is fully closed without applying excessive pressure on the rail (rail should not bow upwards and the chain should not sag or droop below the rail). Push the transmitter or door control. This sets the DOWN (close) limit and begins opening the door.

5.Open and close the door with the transmitter or door control 2 or 3 times (leave door in open position ready for force setting).

1

2

3

merlin+

4

NOTE: The force must now be set in order to

 

complete your installation (refer section 22).

5

 

merlin+

23SETTING THE FORCE

The force setting button is located behind the light lens of the opener. The force setting regulates the amount of power required to open and close the door.

1.Open the light lens. Locate the orange button (2).

2.Push the orange button (2) twice to enter unit into Force Adjustment Mode. The LED (3) (indicator light) will flash quickly.

3.Push the programmed transmitter (4) or push bar on the door control (if installed). The door will travel to the DOWN (close) position. Push the transmitter (4) again, the door will travel to

the UP (open) position.

4

2

The LED (3) (indicator light) will stop flashing when the force has

 

 

 

been learned.

 

 

The door must travel through a complete cycle, UP and DOWN,

 

2

 

(2x)

in order for the force to be set properly. If the unit cannot open and

 

close your door fully, inspect your door to ensure that it is

 

balanced properly and is not sticking or binding.

 

 

The force MUST be learned in order to properly complete the

 

3

setting of the limits.

 

 

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents MT60P Start by Reading These Important Safety Instructions Door Types Installation HardwareTools Required Hardware ProvidedMT60P Opener Carton Not PicturedBefore YOU Begin Completed Installation Tilt Door Example ShownAssemble Pole Pack Install the Stop Collar and Pole Install the Pole AdaptorFitting the Chain Install the ChainCreated in for proper placement of header Bracket Install the Header BracketPosition the Header Bracket Position the Opener Attach Pole Assembly to Header BracketSectional Door or Tracked Tilt Door ONE Piece Tilt DoorAttach Emergency Release Rope & Handle Hang the OpenerAnglesDo . not bend at the bracket holes FrayingConnecting Door ARM ONE Piece Doors Install LightFasten Door Bracket Connect Door ARM Sectional Doors Connect Electric PowerSetting the limits Setting the ForceComplete your installation refer section Install the Protector System Test the Safety Reverse SystemWireless Programming Optional Accessories Installing the CM128 Wireless Wall Button OptionalUsing the Motion Detecting Control Panel Optional accessoryKeyless Devices Programming Optional Accessories Operation of the Door Control Install Door Control OptionalDoor within a door connection Special FeaturesAccessories Replacement Parts Once a Month Replacement PartsOnce a Year Trouble Shooting Operation of Your Opener Chamberlain Limited Warranty

MT60P specifications

The Chamberlain MT60P is a state-of-the-art garage door opener that combines advanced technology with user-friendly features, making it one of the best choices for homeowners seeking reliability and convenience. This model is designed to cater to various needs while ensuring safety and efficiency.

One of the standout features of the Chamberlain MT60P is its powerful motor, which provides a lifting capacity of up to 600 pounds. This robust operation is suitable for heavy and Michigan weather conditions, delivering consistent performance day in and day out. The durable design ensures longevity, allowing it to handle the rigors of daily use.

The MT60P leverages innovative MyQ technology, which allows users to operate and monitor their garage door remotely through a smartphone app. This feature adds a layer of convenience, enabling users to check whether their garage door is open or closed from anywhere. The app also sends alerts and notifications, providing peace of mind for users concerned about security.

Another notable characteristic of the Chamberlain MT60P is its quiet operation. Equipped with a belt drive system, the opener operates smoothly and silently, making it ideal for homes with bedrooms adjacent to the garage. This feature significantly reduces noise, allowing for a peaceful environment even when the garage door is in use.

Safety is also a top priority for the MT60P. The opener includes safety sensors that detect obstructions in the door's path, reversing the door's direction if anything is detected. This technology helps prevent accidents and protects pets, vehicles, and family members.

Installation of the Chamberlain MT60P is designed to be straightforward, with a user-friendly process that allows homeowners to set it up with minimal effort. Additionally, the garage door opener is compatible with most standard garage doors, enhancing its versatility.

Furthermore, the MT60P comes with two remote controls and a keypad for added accessibility. This feature allows multiple users to access the garage easily, reducing the hassle of forgetting keys or entering codes.

In summary, the Chamberlain MT60P stands out with its advanced motor performance, MyQ technology, quiet operation, and safety features, making it a top choice for garage door openers. Its combination of durability, convenience, and technological innovation addresses modern homeowner needs, ensuring satisfaction for years to come.
Top Page Image Contents