Chamberlain MT60P manual Install Door Control Optional, Operation of the Door Control

Page 17

29INSTALL DOOR CONTROL (OPTIONAL)

16

Locate door control where the garage door is visible, away from door and door hardware and out of the reach of children. Mount at least 1.5m (5 feet) above the floor

Serious personal injury from a moving garage door may result from misuse of opener. Do not allow children to operate the door control or transmitter.

Permanently fasten the caution label to the wall near the door control as a reminder of safe operating procedures.

There are 2 terminals (1) on the back of the door control (2). Strip about 6mm (1/4") of insulation from b

(4). Separate wires enough to connect the white/red wire to RED terminal screw 1 and the white wire to W terminal screw 2.

Fasten the door control to an inside garage wall with sheet metal screws (3) provided. Drill 4mm (5/32") hol use anchors (6) if installing into plasterboard wall. A convenient place is beside the service door and of children.

Run the bell wire up the wall and across the ceiling to the garage door operator. Use insulated st secure wire. The receiver quick connect terminals are located behind the light lens of the operator. C bell wire to the terminals as follows: white/red to red (1) and white to white (2).

Operation of the Door Control

Press to open or close the door. Press again to stop the door while moving.

3

3

6mm

2

 

 

LOCK

LIGHT

2

1

RED WHT

4

WHT -2

RED -1

1

2

4

3

1

3 6

5

4

Page 16 Page 18
Image 17
Page 16 Page 18
Contents MT60P Start by Reading These Important Safety Instructions Door Types Installation HardwareTools Required Hardware ProvidedMT60P Opener Carton Not PicturedAssemble Pole Pack Completed Installation Tilt Door Example ShownBefore YOU Begin Install the Stop Collar and Pole Install the Pole AdaptorFitting the Chain Install the ChainPosition the Header Bracket Install the Header BracketCreated in for proper placement of header Bracket Position the Opener Attach Pole Assembly to Header BracketSectional Door or Tracked Tilt Door ONE Piece Tilt DoorAttach Emergency Release Rope & Handle Hang the OpenerAnglesDo . not bend at the bracket holes FrayingFasten Door Bracket Install LightConnecting Door ARM ONE Piece Doors Connect Door ARM Sectional Doors Connect Electric PowerComplete your installation refer section Setting the ForceSetting the limits Install the Protector System Test the Safety Reverse SystemWireless Programming Optional Accessories Installing the CM128 Wireless Wall Button OptionalUsing the Motion Detecting Control Panel Optional accessoryKeyless Devices Programming Optional Accessories Operation of the Door Control Install Door Control OptionalDoor within a door connection Special FeaturesAccessories Replacement Parts Once a Year Replacement PartsOnce a Month Trouble Shooting Operation of Your Opener Chamberlain Limited Warranty

MT60P specifications

The Chamberlain MT60P is a state-of-the-art garage door opener that combines advanced technology with user-friendly features, making it one of the best choices for homeowners seeking reliability and convenience. This model is designed to cater to various needs while ensuring safety and efficiency.

One of the standout features of the Chamberlain MT60P is its powerful motor, which provides a lifting capacity of up to 600 pounds. This robust operation is suitable for heavy and Michigan weather conditions, delivering consistent performance day in and day out. The durable design ensures longevity, allowing it to handle the rigors of daily use.

The MT60P leverages innovative MyQ technology, which allows users to operate and monitor their garage door remotely through a smartphone app. This feature adds a layer of convenience, enabling users to check whether their garage door is open or closed from anywhere. The app also sends alerts and notifications, providing peace of mind for users concerned about security.

Another notable characteristic of the Chamberlain MT60P is its quiet operation. Equipped with a belt drive system, the opener operates smoothly and silently, making it ideal for homes with bedrooms adjacent to the garage. This feature significantly reduces noise, allowing for a peaceful environment even when the garage door is in use.

Safety is also a top priority for the MT60P. The opener includes safety sensors that detect obstructions in the door's path, reversing the door's direction if anything is detected. This technology helps prevent accidents and protects pets, vehicles, and family members.

Installation of the Chamberlain MT60P is designed to be straightforward, with a user-friendly process that allows homeowners to set it up with minimal effort. Additionally, the garage door opener is compatible with most standard garage doors, enhancing its versatility.

Furthermore, the MT60P comes with two remote controls and a keypad for added accessibility. This feature allows multiple users to access the garage easily, reducing the hassle of forgetting keys or entering codes.

In summary, the Chamberlain MT60P stands out with its advanced motor performance, MyQ technology, quiet operation, and safety features, making it a top choice for garage door openers. Its combination of durability, convenience, and technological innovation addresses modern homeowner needs, ensuring satisfaction for years to come.
Top Page Image Contents