Harman-Kardon AVR 310 owner manual Technical Specifications

Page 53

Technical Specifications

Audio Section

Stereo Mode

Continuous Average Power (FTC)

60 Watts per channel, 20Hz–20kHz,

@ < 0.07% THD, both channels driven into 8 ohms

Five-Channel Surround Modes

Power Per Individual Channel

Front L&R channels:

50 Watts per channel

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

50 Watts @ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround channels:

50 Watts per channel

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

95dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz– 100kHz

High Instantaneous

 

Current Capability (HCC)

±35 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16 µsec

Slew Rate

40V/µsec

FM Tuner Section

 

Frequency Range

87.5 –108MHz

Usable Sensitivity

IHF 1.3 µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

Tuner Output Level

1kHz, ±75kHz Dev 500mV

AM Tuner Section

 

Frequency Range

520 –1710 kHz

Signal-to-Noise Ratio

45 dB

Usable Sensitivity

Loop 500 µV

Distortion

1kHz, 50% Mod 0.8%

Selectivity

±10kHz, 30dB

Video Section

 

Television Format

NTSC

Input Level/Impedance

1Vp-p /75 ohms

Output Level/Impedance

1Vp-p /75 ohms

Video Frequency

 

Response

10Hz–8MHz (–3dB)

General

 

Power Requirement

AC 120V/60Hz

Power Consumption

72W idle, 580W maximum

 

(2 channels driven)

Dimensions (Max)

 

Width

17.3 inches (440mm)

Height

6.5 inches (165mm)

Depth

17.1 inches (435mm)

Weight

32 lb (14.5 kg)

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon is a registered trademark, and Power for the Digital Revolution is a trademark, of Harman International Industries, Inc.

TM is a trademark of Harman International Industries, Inc. (Patent No. 5,386,478).

*Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic,” “AC-3” and the Double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.

DTS and DTS Surround are trademarks of Digital Theater Systems, Inc.

VMAx is a registered trademark of Harman International Industries, Inc., and is an implementation of Cooper Bauck Transaural Stereo under patent license.

Logic 7 is a registered trademark of Lexicon, Inc.

Crystal is a registered trademark of Cirrus Logic Corp.

53TECHNICAL SPECIFICATIONS

Page 52 Page 54
Image 53
Page 52 Page 54
Contents
AVR 310 Audio/ Video Receiver AVR 310 Audio/ Video Receiver Introduction Description and FeaturesWhile complex digital systems are hard Output Levels for OptimumUnpacking Safety InformationImportant Safety Information # Digital Optical 3 Input Set Button  Input Indicators Ò DelayFront Panel Controls See Preset Stations Selector Press thisFront Panel Information Display Night Mode Indicator This indicatorOther aspects of the AVR 310’s operation £ Video 1 Audio Inputs ‡ Unswitched AC Accessory Outlet Tape Outputs Switched AC Accessory Outlet¢ AM Antenna AC Power Cord ¡ Tape InputsRear Panel Connections AVR Selector Main Remote Control FunctionsDialog center channel intelligibility at low volume levels Main Remote Control Functions37 6-Ch. Direct Input Press this button ` Preset Up/Down When the tuner isTo select the component connected to Channel Direct Input ª as the sourceBetween the AM and FM bands Zone II Remote Control FunctionsPower Off When used in the room System Installation Installation and ConnectionsAudio Equipment Connections Connect the analog output of a CD player to the CD inputsSystem and Power Connections Speaker Selection and Placement System ConfigurationSpeaker Placement System SetupSetting the System Configuration Memories Using the On-Screen Display32 ı to set the speaker configuration, etc Surround Setup Input SetupDelay Settings Buttons on the remote will take you to the delay settingsNight Mode Settings ¤ button n and then the Set buttonSurround Speaker SetupInformation Display Y Output Level AdjustmentIf no subwoofer is connected to Press and hold the SPL Indicator Select Using EzSetAdditional Input Adjustments Source Selection OperationBasic Operation Surround Mode Chart Digital Audio Playback Surround Mode SelectionSelecting a Digital Source Dolby DigitalAddition to the bitstream indicators, Digital Status IndicatorsNight Mode On the disc to send a full 5.1 feed toStation Selection Tuner OperationMP3 Audio Playback Preset Tuning Output Level Trim AdjustmentRecalling Preset Stations Tape RecordingChannel Direct Input Memory BackupTurn-On Volume Level Advanced FeaturesSemi-OSD Settings Display Brightness AVR 310’s Main Information DisplayButton v to exit the menu system Full-OSD Time Out AdjustmentInstallation Multiroom SetupMultiroom Operation Multiroom OperationProgramming the Remote Programming the RemoteMacro Programming Learning CodesErasing Learned Codes Erasing Macro Commands Press the Mute 38 button to store the TV Power On CommandMode Selector/Channel Down button k Press the AVR Selector fTransport Control Punch-Through Volume Punch-ThroughChannel Control Punch-Through Reassigning Device Control Selectors Resetting the Remote MemoryFunction List Preset Down Preset UpTune Up DirectSetup Code Table TV 001 011 030 033 042 044 100 107 115 154 160 167 168 084175 176 021 031Setup Code Table VCR 057 058 159147 166 070 074 078 086 114 125 150 167 172Setup Code Table CD 020 036 056 057 064 065 089 090 091 092 096 099 104 212 037 038 045 046 171 175 202 203015 075 109 119 158 183 204 039 051 138 149 209Setup Code Table Audio Setup Code Table TapeSetup Code Table DVD Setup Code NumberSetup Code Table SAT Setup Code Table CBL 053 214 111 112 213055 056 061 099 100 101 207 063 115Processor Reset Troubleshooting GuideInformation from nonencoded programs Lights, motors or other electrical appliancesTechnical Specifications Page Page Harman Kardon, Incorporated Part No. J90200012200