Harman-Kardon owner manual Other aspects of the AVR 310’s operation

Page 8

Front Panel Information Display

will light to display the channels being received at the digital input. When the letters flash, the digital input has been interrupted. (See page 28 for more information on the Channel Indicators.)

RPreset Number/Sleep Timer: When the tuner is in use, these numbers indicate the spe- cific preset memory location in use. (See page 29 for more information on preset stations.) When the Sleep function is in use, these numbers show how many minutes remain before the unit goes into the Standby mode.

SPreset Indicator: This indicator lights when the tuner is in use to show that the Preset Number/Sleep Timer R is showing the sta- tion’s preset memory number. (See page 30 for more information on tuner presets.)

TSleep Indicator: This indicator lights when the Sleep function is in use. The numbers in the Preset Number/Sleep Timer Indicators will show the minutes remaining before the AVR 310 goes into the Standby mode. (See page 25 for more information on the Sleep function.)

UMemory Indicator: This indicator flashes when entering presets and other information into the tuner’s memory.

VStereo Indicator: This indicator lights when an FM station is being tuned in stereo.

WTuned Indicator: This indicator lights when a station is being received with sufficient signal strength to provide acceptable listening quality.

XAuto Indicator: This indicator lights when the tuner’s Auto mode is in use.

YMain Information Display: This display shows messages relating to the status, input source, surround mode, tuner, volume level or

other aspects of the AVR 310’s operation.

ZMute Indicator: This indicator lights to remind you that the AVR 310’s output has been silenced by pressing the Mute button ˚ 38 . Press the Mute button again to return to the previously selected output level.

8FRONT PANEL INFORMATION DISPLAY

Page 7 Page 9
Image 8
Page 7 Page 9
Contents
AVR 310 Audio/ Video Receiver AVR 310 Audio/ Video Receiver Description and Features IntroductionWhile complex digital systems are hard Output Levels for OptimumUnpacking Safety InformationImportant Safety Information # Digital Optical 3 Input Set Button  Input Indicators Ò DelayFront Panel Controls Preset Stations Selector Press this SeeNight Mode Indicator This indicator Front Panel Information DisplayOther aspects of the AVR 310’s operation Tape Outputs Switched AC Accessory Outlet £ Video 1 Audio Inputs ‡ Unswitched AC Accessory Outlet¢ AM Antenna AC Power Cord ¡ Tape InputsRear Panel Connections Main Remote Control Functions AVR SelectorMain Remote Control Functions Dialog center channel intelligibility at low volume levels` Preset Up/Down When the tuner is 37 6-Ch. Direct Input Press this buttonTo select the component connected to Channel Direct Input ª as the sourceBetween the AM and FM bands Zone II Remote Control FunctionsPower Off When used in the room Installation and Connections System InstallationAudio Equipment Connections Connect the analog output of a CD player to the CD inputsSystem and Power Connections System Configuration Speaker Selection and PlacementSpeaker Placement System SetupSetting the System Configuration Memories Using the On-Screen Display32 ı to set the speaker configuration, etc Input Setup Surround SetupButtons on the remote will take you to the delay settings Delay SettingsNight Mode Settings ¤ button n and then the Set buttonSpeaker Setup SurroundInformation Display Y Output Level AdjustmentIf no subwoofer is connected to Using EzSet Press and hold the SPL Indicator SelectAdditional Input Adjustments Source Selection OperationBasic Operation Surround Mode Chart Surround Mode Selection Digital Audio PlaybackSelecting a Digital Source Dolby DigitalDigital Status Indicators Addition to the bitstream indicators,Night Mode On the disc to send a full 5.1 feed toStation Selection Tuner OperationMP3 Audio Playback Output Level Trim Adjustment Preset TuningRecalling Preset Stations Tape RecordingMemory Backup Channel Direct InputAdvanced Features Turn-On Volume LevelSemi-OSD Settings Display Brightness AVR 310’s Main Information DisplayFull-OSD Time Out Adjustment Button v to exit the menu systemMultiroom Setup InstallationMultiroom Operation Multiroom OperationProgramming the Remote Programming the RemoteMacro Programming Learning CodesErasing Learned Codes Press the Mute 38 button to store the TV Power On Command Erasing Macro CommandsMode Selector/Channel Down button k Press the AVR Selector fTransport Control Punch-Through Volume Punch-ThroughChannel Control Punch-Through Resetting the Remote Memory Reassigning Device Control SelectorsFunction List Preset Up Preset DownTune Up DirectSetup Code Table TV 084 001 011 030 033 042 044 100 107 115 154 160 167 168175 176 021 031Setup Code Table VCR 159 057 058147 166 070 074 078 086 114 125 150 167 172Setup Code Table CD 037 038 045 046 171 175 202 203 020 036 056 057 064 065 089 090 091 092 096 099 104 212015 075 109 119 158 183 204 039 051 138 149 209Setup Code Table Tape Setup Code Table AudioSetup Code Table DVD Setup Code NumberSetup Code Table SAT Setup Code Table CBL 111 112 213 053 214055 056 061 099 100 101 207 063 115Troubleshooting Guide Processor ResetInformation from nonencoded programs Lights, motors or other electrical appliancesTechnical Specifications Page Page Harman Kardon, Incorporated Part No. J90200012200