TS-TPI Installation & Wiring, Overview

TS-TPI INSTALLATION & WIRING

Overview

The TS-TPI Turbine Pump Interface is a communication device that allows the INCON TS-1001, TS-2001 Automatic Tank Gauge (ATG) or other devices to communicate with the turbine pump controllers (TPC). The TS-TPI is available as a stand alone unit, which requires its own input power, and as an integrated factory installed option in the TS-LS300 AutoLearn Line Leak Detec- tor. The TS-TPI allows the ATG or other device to receive pump status information and, depend- ing on the type of TPC, controls the pump.

In this chapter a brief description of each application is presented as well as the wiring of each component for the particular application. Please contact Franklin Fueling System Technical Support, (800)984-6266 if the TS-TPI is to be used in any other application.

Specific details of installation and the general programming instructions for the ATG is found in the Tank Sentinel Installation Guide (part number 000-1050). Specific programming instructions concerning the TS-TPI with the ATG will be covered in this Guide.

Look for your specific application on the following pages. Wire the components according to the wire diagram and then go to the next chapter “Tank Sentinel/TS-TPI Interface” for information on the features of the TS-TPI. The rest of the chapters provide instruction for programming the ATG to take full advantage of the TS-TPI.

Here are the application options covered in this guide:

●TS-ATG with TS-TPI and TS-LS300 AutoLearn Console

●TS-ATG with TS-TPI, TS-LS300 AutoLearn Console and TPCs

●TS-ATG with TS-TPI and two TS-LS300 AutoLearn Consoles

●TS-ATG with TS-TPI, two TS-LS300 AutoLearn Consoles and TPCs

●TS-ATG with Stand alone TS-TPI and TPCs

●Stand alone TS-TPI with TPCs

ELECTRICAL DANGER Verify that no voltage exists before working-on, or wiring-to circuits described in this manual, otherwise lethal electrical-shock-hazards could exist, which may cause injury or death. Note: circuit breaker contact(s) can fail to open even when the circuit breaker lever indicates off.

ELECTRICAL DANGER BEFORE performing any installation or service lock-out and tag all electrical power sources to the submersible pump(s), pump controllers, and dispensers and relieve fuel-line pressure. Electronic line leak detectors start submersible pumps automatically

to run leak-tests. Automatic pump starts occur between periods of product dispensing when there is no product being dispensed.

Installation and Wiring	Page 2-1
TS-TPI Installation and Wiring Guide

TS-TPI specifications

The Franklin TS-TPI (Total Pipeline Inspection) is a cutting-edge tool designed to revolutionize pipeline inspections across various industries, including oil and gas, water, and wastewater management. This advanced technology enables operators to assess the integrity of pipeline systems efficiently and accurately, ensuring safety and compliance with regulatory standards.

One of the main features of the Franklin TS-TPI is its ability to perform comprehensive inspections using a variety of sensors and imaging technologies. It incorporates high-definition cameras that provide detailed visual representations of the pipeline's interior, allowing for real-time monitoring and evaluation. Additionally, it leverages ultrasonic and electromagnetic sensors to detect anomalies such as corrosion, leaks, and structural defects—critical factors that could lead to catastrophic failures if left unaddressed.

The Franklin TS-TPI employs innovative robotics and autonomous capabilities, enabling it to navigate complex pipeline systems with ease. Its modular design allows for customization based on the specific needs of a pipeline, with attachments that can be added or removed as required. This flexibility not only enhances its functionality but also extends the lifespan of the equipment by allowing operators to upgrade sensors and technology as new advancements emerge.

Another notable characteristic of the Franklin TS-TPI is its data management capabilities. The system collects vast amounts of inspection data, which can be analyzed using advanced software solutions. This technology provides operators with insights into the condition of their pipelines, helping them make informed decisions regarding maintenance and repairs. Predictive analytics can also be applied to assess the likelihood of future failures, allowing for proactive actions to prevent costly disruptions.

The Franklin TS-TPI's user-friendly interface and powerful reporting tools enhance its usability, making it accessible to a wide range of professionals. With easy integration into existing pipeline management systems, it can streamline operations, improve response times to potential issues, and help operators meet compliance and safety standards more effectively.

Overall, the Franklin TS-TPI represents a significant leap forward in pipeline inspection technology. Its combination of advanced imaging, sensor technology, robotics, and data analytics creates a robust solution that addresses the challenges faced by industries reliant on pipeline infrastructure. By ensuring the integrity and operational efficiency of pipelines, the Franklin TS-TPI not only protects valuable resources but also promotes environmental sustainability and public safety.