Harbor Freight Tools 65322 manual Service precautions, If damaged, have the equipment

Page 5

12.Parts, especially exhaust system components, get very hot during use. Stay clear of hot parts.

13.Do not cover the engine or equipment during operation.

14.Keep the equipment, engine, and sur- rounding area clean at all times.

15.Use the equipment, accessories, etc., in accordance with these instructions and in the manner intended for the particular type of equipment, taking into account the working conditions and the work to be performed. Use of the equipment for operations differ- ent from those intended could result in a hazardous situation.

16.Do not operate the equipment with known leaks in the engine’s fuel sys- tem.

17.This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproduc- tive harm. (California Health & Safety Code § 25249.5, et seq.)

18.When spills of fuel or oil occur, they must be cleaned up immediately.

Dispose of fluids and cleaning materi- als as per any local, state, or federal codes and regulations. Store oil rags in a bottom-ventilated, covered, metal container.

19.Keep hands and feet away from moving parts. Do not reach over or across equipment while operating.

20.Before use, check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the equipment’s operation.

If damaged, have the equipment

serviced before using. Many ac- cidents are caused by poorly main- tained equipment.

21.Use the correct equipment for the application. Do not modify the equip- ment and do not use the equipment for a purpose for which it is not in- tended.

Service precautions

1.Before service, maintenance, or cleaning:

a.Turn the engine switch to its “OFF” position.

b.Allow the engine to completely cool.

c.Then, remove the spark plug wire(s) from the spark plug(s).

2.Keep all safety guards in place and in proper working order. Safety guards include muffler, air cleaner, mechani- cal guards, and heat shields, among other guards.

3.Do not alter or adjust any part of the equipment or its engine that is sealed by the manufacturer or dis- tributor. Only a qualified service technician may adjust parts that may increase or decrease gov- erned engine speed.

4.Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during service.

5.Maintain labels and nameplates on the equipment. These carry impor- tant information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

SKU 65322 or 65323 For technical questions, please call 1-800-444-3353. Page 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callContents Save This Manual Set up precautionsCarbon Monoxide Hazard Using an engine indoors Operating precautionsIf damaged, have the equipment Service precautionsUnpacking Pump SpecificationsAssembly Set Up InstructionsOperating Instructions Starting the EngineChecking and Filling Fuel Oil typeBreak-in Period Pump OperationEngine Controls and Indicators Check that all mounting nuts and bolts are tight Pre-Operation ChecksStarting the Engine Stopping the EngineServicing Technical SpecificationsMaintenance Procedures Spark Plug Maintenance Air Filter Element MaintenanceCleaning Cleaning, Maintenance, Lubrication Schedule Pump Storage Preparation StorageStart Engine TroubleshootingProblem Possible Causes Probable Solutions Engine will not Engine stops Problem Possible Causes Probable Solutions Engine misfiresSuddenly Engine knocksPump Troubleshooting Pump Parts ListProblem Possible Causes Probable Solutions Part Description ’tyPump Assembly Diagram Description Qty Crankcase Assembly DiagramQTY Crankcase Cover Assembly DiagramCylinder Head and Cover Assembly Diagram Crankshaft, Piston and Connecting Rod Assembly Diagram Camshaft and Rocker Valve Assembly Diagram Carburetor Assembly Diagram Fuel Tank Assembly Diagram Air Cleaner Assembly Diagram Muffler Assembly Diagram Recoil STarter Assembly Diagram REgulator Control Assembly Diagram Flywheel Assembly Diagram Ignition Coil Assembly Diagram Wiring Diagram Emission Control System Warranty Limited 1 year / 90 Day WarrantyLength of Coverage

65322 specifications

Harbor Freight Tools offers a wide range of products, catering to both professional tradespeople and DIY enthusiasts. One standout item in their extensive lineup is the Harbor Freight Tools 65322, a versatile tool that has garnered significant attention for its impressive features and capabilities.

The Harbor Freight Tools 65322 is primarily recognized as a 12-inch miter saw, designed to deliver precise and clean cuts for various materials. Its powerful motor, providing a robust performance of 15 amps, allows users to tackle tougher cutting tasks with ease. The tool can reach a no-load speed of up to 4,500 RPM, ensuring efficient cutting whether you're working with wood, plastic, or even softer metals. This makes it an invaluable asset for carpenters, woodworkers, and general contractors alike.

One of the standout features of the 65322 is its dual bevel capability, which permits users to make bevel cuts in both directions. This simplifies the cutting process, eliminating the need to flip the workpiece, ultimately saving time and increasing accuracy. The saw features precision mechanical stops for commonly used angles at 0°, 15°, 22.5°, 30°, and 45°, enabling quick adjustments and repeatable cuts. The laser guide system also helps ensure precision in alignment, making it easier to follow cutting lines.

The design of the Harbor Freight Tools 65322 includes a durable and stable base, which enhances overall safety and reduces vibrations during operation. The integrated dust collection bag helps maintain a clean work environment by capturing sawdust and debris, which is crucial for visibility and safety.

In addition to its performance features, the Harbor Freight Tools 65322 is designed with user comfort in mind. Its ergonomic handle provides a secure grip, minimizing hand fatigue during extended use. The saw's lightweight structure further contributes to its ease of use, allowing for portability and simple storage.

Overall, the Harbor Freight Tools 65322 combines powerful performance, precision cutting technology, and user-friendly design. Whether you’re a seasoned professional or a DIY newcomer, this miter saw is a compelling choice for anyone looking to enhance their woodworking experience. With its combination of features and affordability, it represents a solid investment for those serious about their craft.
Top Page Image Contents