Oil type, Checking and Filling Fuel | Harbor Freight Tools 65322

1.Wipe off dipstick area, remove dip- stick and wipe it off with a clean rag.

2.Reinsert the dipstick (do not thread in) and remove it to check the oil level. The oil level should be be- tween the high and low marks on the dipstick.

3.If the oil level is below the low mark add the appropriate type of oil until the oil level is between the high and the low marks.

Oil type:

32° F or above = SAE 10W30 Below 32° F = SAE 5W30

1.Replace the Oil Dipstick.

CAUTION! Do not run the engine with too little or too much oil. The engine will be permanently damaged.

Checking and Filling Fuel

WARNING! To prevent serious injury from fire:

Fill the fuel tank in a well-venti- lated area away from ignition sourc- es. Do not smoke.

1.Check the fuel level before starting engine.

2.To fill the Fuel Tank, first wipe off the

Fuel Tank Cap and the surrounding area.

3.Unscrew, and remove the Fuel Tank Cap.

4.Mix fuel stabilizer (not included) with 91 octane (or better) unleaded gaso- line according to fuel stabilizer direc- tions.

5.Fill the Fuel Tank to about 1 inch un- der the fill neck of the gasoline tank with the stabilized unleaded gasoline mixture.

6.Then replace the Fuel Tank Cap.

Start Procedure

Before starting the engine: a. Follow the Set Up Instruc-

tions to prepare the equip- ment.

b. Inspect the equipment and engine.

c. Fill the engine with the prop-

er amount and type of fuel and oil.

d. Read the Equipment Opera- tion section that follows.

1.Turn the engine fuel valve to its

“OPEN” position.

2.Turn the engine power switch to its ON or RUN position.

3.Then, turn the engine choke lever to its “CHOKE” position. Set the choke lever in the “RUN” position when starting a warm engine.

4.Grasp the starter handle, and pull slowly until resistance is felt. While holding the handle, allow the starter rope to rewind slowly. Then, pull the starter handle with a rapid, full arm stroke. Once again while holding the handle, allow the rope to rewind slowly. Repeat as necessary, until the engine starts.

5.After the engine starts and warms up, slowly move the choke lever to its

“RUN” position.

SKU 65322 or 65323 For technical questions, please call 1-800-444-3353. Page 8

65322 specifications

Harbor Freight Tools offers a wide range of products, catering to both professional tradespeople and DIY enthusiasts. One standout item in their extensive lineup is the Harbor Freight Tools 65322, a versatile tool that has garnered significant attention for its impressive features and capabilities.

The Harbor Freight Tools 65322 is primarily recognized as a 12-inch miter saw, designed to deliver precise and clean cuts for various materials. Its powerful motor, providing a robust performance of 15 amps, allows users to tackle tougher cutting tasks with ease. The tool can reach a no-load speed of up to 4,500 RPM, ensuring efficient cutting whether you're working with wood, plastic, or even softer metals. This makes it an invaluable asset for carpenters, woodworkers, and general contractors alike.

One of the standout features of the 65322 is its dual bevel capability, which permits users to make bevel cuts in both directions. This simplifies the cutting process, eliminating the need to flip the workpiece, ultimately saving time and increasing accuracy. The saw features precision mechanical stops for commonly used angles at 0°, 15°, 22.5°, 30°, and 45°, enabling quick adjustments and repeatable cuts. The laser guide system also helps ensure precision in alignment, making it easier to follow cutting lines.

The design of the Harbor Freight Tools 65322 includes a durable and stable base, which enhances overall safety and reduces vibrations during operation. The integrated dust collection bag helps maintain a clean work environment by capturing sawdust and debris, which is crucial for visibility and safety.

In addition to its performance features, the Harbor Freight Tools 65322 is designed with user comfort in mind. Its ergonomic handle provides a secure grip, minimizing hand fatigue during extended use. The saw's lightweight structure further contributes to its ease of use, allowing for portability and simple storage.

Overall, the Harbor Freight Tools 65322 combines powerful performance, precision cutting technology, and user-friendly design. Whether you’re a seasoned professional or a DIY newcomer, this miter saw is a compelling choice for anyone looking to enhance their woodworking experience. With its combination of features and affordability, it represents a solid investment for those serious about their craft.