Harbor Freight Tools 65322 manual Pump Specifications, Unpacking

Page 6

6.Have the equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equip- ment is maintained. Do not attempt any service or maintenance proce- dures not explained in this manual or any procedures that you are un- certain about your ability to perform safely or correctly.

7.Store equipment out of the reach of children.

8.Follow scheduled engine and equip- ment maintenance.

9.Refueling Precautions:

a.Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling.

b.Do not refill the fuel tank while the engine is running or hot.

c.Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed.

d.Refuel in a well-ventilated area only.

Save these instructions.

Pump Specifications

Inlet / Outlet Diameter

Model 65322 = 3”

Model 65323 = 2”

 

Maximum Flow in GPM

Model 65322 = 345

(Gallons per Minute)

Model 65323 = 235

Maximum Lift Suction

Model 65322 = 26’

Model 65323 = 23’

 

Maximum Head

Model 65322 = 85’

Model 65323 = 82’

 

Anti-Reverse Flow

Rubberized Flap on

Inlet Port

 

Note: Additional specifications found in the Technical Engine Specifi- cations chart in this manual.

The emission control system for this engine is warranted for standards set by the U.S. Environmental Protec- tion Agency. For warranty information, refer to the last pages of this manual.

At high altitudes, the engine’s carbu- retor, governor (if so equipped), and any other parts that control the fuel-air ratio will need to be adjusted by a qualified me- chanic to allow efficient high-altitude use and to prevent damage to the engine and any other devices used with this product.

Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

Included Accessories:

a. Inlet and Outlet Pipes. b. Inlet Hose Basket Filter

SKU 65322 or 65323 For technical questions, please call 1-800-444-3353. Page 6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsContents Set up precautions Save This ManualOperating precautions Carbon Monoxide Hazard Using an engine indoorsService precautions If damaged, have the equipmentPump Specifications UnpackingOperating Instructions Set Up InstructionsAssembly Starting the EngineOil type Checking and Filling FuelPump Operation Break-in PeriodEngine Controls and Indicators Pre-Operation Checks Check that all mounting nuts and bolts are tightStopping the Engine Starting the EngineTechnical Specifications Maintenance ProceduresServicing Air Filter Element Maintenance CleaningSpark Plug Maintenance Cleaning, Maintenance, Lubrication Schedule Storage Pump Storage PreparationEngine Troubleshooting Problem Possible Causes Probable Solutions Engine will notStart Suddenly Problem Possible Causes Probable Solutions Engine misfiresEngine stops Engine knocksProblem Possible Causes Probable Solutions Pump Parts ListPump Troubleshooting Part Description ’tyPump Assembly Diagram Crankcase Assembly Diagram Description QtyCrankcase Cover Assembly Diagram QTYCylinder Head and Cover Assembly Diagram Crankshaft, Piston and Connecting Rod Assembly Diagram Camshaft and Rocker Valve Assembly Diagram Carburetor Assembly Diagram Fuel Tank Assembly Diagram Air Cleaner Assembly Diagram Muffler Assembly Diagram Recoil STarter Assembly Diagram REgulator Control Assembly Diagram Flywheel Assembly Diagram Ignition Coil Assembly Diagram Wiring Diagram Limited 1 year / 90 Day Warranty Emission Control System WarrantyLength of Coverage

65322 specifications

Harbor Freight Tools offers a wide range of products, catering to both professional tradespeople and DIY enthusiasts. One standout item in their extensive lineup is the Harbor Freight Tools 65322, a versatile tool that has garnered significant attention for its impressive features and capabilities.

The Harbor Freight Tools 65322 is primarily recognized as a 12-inch miter saw, designed to deliver precise and clean cuts for various materials. Its powerful motor, providing a robust performance of 15 amps, allows users to tackle tougher cutting tasks with ease. The tool can reach a no-load speed of up to 4,500 RPM, ensuring efficient cutting whether you're working with wood, plastic, or even softer metals. This makes it an invaluable asset for carpenters, woodworkers, and general contractors alike.

One of the standout features of the 65322 is its dual bevel capability, which permits users to make bevel cuts in both directions. This simplifies the cutting process, eliminating the need to flip the workpiece, ultimately saving time and increasing accuracy. The saw features precision mechanical stops for commonly used angles at 0°, 15°, 22.5°, 30°, and 45°, enabling quick adjustments and repeatable cuts. The laser guide system also helps ensure precision in alignment, making it easier to follow cutting lines.

The design of the Harbor Freight Tools 65322 includes a durable and stable base, which enhances overall safety and reduces vibrations during operation. The integrated dust collection bag helps maintain a clean work environment by capturing sawdust and debris, which is crucial for visibility and safety.

In addition to its performance features, the Harbor Freight Tools 65322 is designed with user comfort in mind. Its ergonomic handle provides a secure grip, minimizing hand fatigue during extended use. The saw's lightweight structure further contributes to its ease of use, allowing for portability and simple storage.

Overall, the Harbor Freight Tools 65322 combines powerful performance, precision cutting technology, and user-friendly design. Whether you’re a seasoned professional or a DIY newcomer, this miter saw is a compelling choice for anyone looking to enhance their woodworking experience. With its combination of features and affordability, it represents a solid investment for those serious about their craft.
Top Page Image Contents