Ingersoll-Rand PH15F-XXX-XXX-X manual Torque Sequence,  Assembly Torque Requirements 

PARTS LIST / PH15F-XXX-XXX-X FLUID SECTION

22

21

19

68

61(model PH15F-FXX-XXX)

61

26

78

181

70 144

FOR THE AIR MO- TOR SECTION, SEE PAGES 6 & 7.

3 1

58

910

76

24

Torque Sequence

26

15

21

19

70

144 1

175 43 126�

78 27

60 (models PH15F-AXX-XXX

and PH15F-BXX-XXX)

63 2

60(model PH15F-FXX-XXX)

195 69

5	8
		76
	6
		19
		9
		77

		15a
	14	77
180
131	29
	26	76
		19

View for PH15F-XXX-XXT-X (PTFE diaphragm)

configuration only.

(Santoprene) 8 (PTFE) 7

Figure 2

ASSEMBLY TORQUE REQUIREMENTS 

NOTE: DO NOT OVERTIGHTEN FASTENERS.

ALL FASTENERS ARE METRIC.

(14)Cap Screws 50-55 Ft-Lbs (67.8 - 74.6 Nm).

(26)Manifold Screws 20 - 25 Ft-Lbs (27.1- 33.9 Nm).

(27)Fluid Cap 15-20 Ft-Lbs (20.3 - 27.1 Nm).

(131) Screws 12-17 Ft-Lbs (16.3 - 23 Nm).

LUBRICATION / SEALANTS

Apply Lubriplate FML-2 grease to all “O” rings, “U” cups and mating parts.  Apply Loctite® 262™ to threads at assembly.

 Apply PTFE tape to threads at assembly.  Apply Loctite 271™ to threads.

 Apply anti-seize compound to threads and bolt and nut flange heads which contact pump case when using stainless steel fasteners.

 Apply 96998 3/8” wide x 1/8” thick Joint Sealant (aproximately 27.12” long) to air cap (item 68 only) diaphragm bead groove. Use ONLY 1 wrap of sealant. DO NOT overlap seam. Fill seam with heavy duty an- aerobic pipe sealant. Seam to be located between bolt positions 1 and 3 (refer to “Torque Sequence” diagram).

Lubriplate FML-2 is a white food grade petroleum grease.

PH15F-XXX-XXX-X (en) Page of 8