Harman-Kardon AVR4500 owner manual System and Power Connections

Page 18

Installation and Connections

System and Power Connections

The AVR 4500 is designed for flexible use with multiroom systems, external control components and power amplifiers.

Main Room Remote Control Extension

If the receiver is placed behind a solid or smoked glass cabinet door, the obstruction may prevent the remote sensor from receiving commands. In this event, the remote sensor of any Harman Kardon or other compatible device, not covered by the door, or an optional remote sensor may be used. Connect the Remote IR Output of that device or the output of the remote sensor to the Remote IR Input jack ￿.

If other components are also prevented from receiving remote commands, only one sensor is needed. Simply use this unit’s sensor or a remote eye by running a connection from the Remote IR Output jack ￿ to the Remote IR Input jack on Harman Kardon or other compatible equipment.

Multiroom IR Link

The key to remote room operation is to link the remote room to the AVR 4500’s location with wire for an infrared receiver and speakers or an amplifier. The remote room IR receiver (this can be an optional IR receiver or any other remotable Harman Kardon device in the remote room with IR sensor integrated) should be connected to the AVR 4500 via standard coaxial cable. Connect the Remote IR Output of the device or of the optional sensor with the Multiroom IR Input jack ￿ on the AVR4500’s rear panel.

If other Harman Kardon compatible source equipment is part of the main room installation, the Remote IR Output jack ￿ on the rear panel should be connected to the IR IN jack on that source device. This will enable the remote room location to control source equipment func- tions.

NOTE: All remotely controlled components must be linked together in a “daisy chain”. Connect the IR OUT jack of one unit to the IR IN of the next to establish this chain.

Multiroom Audio Connections

Depending on the distance from the AVR 4500 to the remote room, two options are available for audio connection:

Option 1: Use high-quality, shielded audio interconnect phono cable from the AVR 4500’s location to the remote room. In the remote room, connect the interconnect cable to a stereo power amplifier. The amplifier will be connected to the room’s speakers. At the AVR 4500, plug the audio interconnect cables into the Multiroom Output Jacks ￿ on the AVR 4500’s rear panel.

Option 2: Place the amplifier that will provide power to the remote location speakers in the same room as the AVR 4500, and connect the Multiroom Output jacks ￿ on the rear panel of the AVR to the audio input of the remote room amplifier. Use the appropriate speaker wire to connect the optional power amplifier to the remote speakers. High-quality wire of at least

2.5mm2 is recommended for long multiroom connections.

NOTE: In both options, you may connect an optional IR sensor in the remote room to the AVR 4500 via an appropriate cable. Connect the sensor’s cable to the Multiroom IR Input ￿ on the AVR 4500 and use the Zone II remote to control the room volume. Alternatively, you may install an optional volume control between the output of the amplifiers and the speakers.

External Audio Power Amplifier

Connections

If desired, the AVR 4500 may be connected to optional, external audio power amplifiers. When an external amplifier is used, connect the Preamp Out jacks ￿ to the inputs on the amplifier. Note that when external amplifiers or devices are used, volume is still controlled by the AVR, although additional volume controls on the external device may affect volume and output levels from the AVR.

AC Power Connections

This unit is equipped with two accessory AC out- lets. They may be used to power accessory devices, but they should not be used with high- current draw equipment such as power ampli- fiers. The total power draw to the Unswitched Outlet ￿ must not exceed 100 watts, that to the Switched Outlet ￿ 50 watts.

The Switched ￿ outlet will receive power only when the unit is on completely. This is recom- mended for devices that have no power switch or a mechanical power switch that may be left in the “ON” position.

NOTE: Many audio and video products go into a Standby mode when they are used with switched outlets, and cannot be fully turned on using the outlet alone without a remote control command.

The Unswitched ￿ outlet will receive power as long as the unit is plugged into a powered AC outlet and the Main Power Switch 1 is on.

Finally, when all connections are complete, plug the power cord into a nonswitched 220-240-volt AC wall outlet. You’re almost ready to enjoy the AVR 4500!

18INSTALLATION AND CONNECTIONS

Page 17 Page 19
Image 18
Page 17 Page 19
Contents AVR 4500 Audio/Video Receiver Table of Contents Declaration of ConformityFront panel analog A/V inputs Description and FeaturesIntroduction Main Remote with Internal Codes and Learning CapabilitySafety Information Important Safety InformationUnpacking Front Panel Controls Logic 7 Mode Selector /‹ Button This For more informationFront Panel Information Display Front Panel Information DisplaySee page 31 for more information on the Sleep function Rear Panel Connections Digital Audio Outputs Connect theseRear Panel Connections Rear Panel Connections Main Remote Control Functions Main Remote Control FunctionsEzSet Sensor Microphone Main Remote Control Functions Directly enter a radio station’s frequency Zone II Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ MuteAudio Equipment Connections Installation and ConnectionsInstallation and Connections Video Equipment ConnectionsVideo Video In/Out jacks, if it´s a recording VCR Scart A/V ConnectionsVideo Connection Notes Important Note for Adapter CablesRGB signals can be pathed through Important Note for the Use SCART-Cinch AdaptersSystem and Power Connections Speaker Placement Speaker SelectionSystem Configuration System ConfigurationUsing the On-Screen Display First Turn OnInput Setup Speaker SetupFront panel or Surround SubwooferSurround Setup Delay Settings Adjustments for Other InputsSettings Keeping Independent from the Input Selected ¤ Button Dso that the cursor is next toNight Mode Settings Output Level Adjustment Using EzSetPress and hold the SPL Indicator Select So that on is highlighted Up the Volume until you can hear the test noise clearly Surround Mode Chart OperationHall OFF StereoControls and Use of Headphones Basic OperationSource Selection 7y, DSP 9Amodes or Stereo $ Surround Mode SelectionDigital Audio Playback Dolby DigitalPCM Audio Playback MP3 Audio PlaybackSelecting a Digital Source Digital Status Indicators See FigureTape Recording Output Level Adjustment With Source SignalsNight Mode Front Panel In/OutputsChannel/8-Channel Direct Input Memory BackupTo turn the sensor and indicator off Select to activate the sensorAdvanced Features Advanced FeaturesTurn On Volume Level Display BrightnessSemi-OSD Settings Full-OSD Time Out AdjustmentMultiroom Operation InstallationMultiroom Setup Multiroom OperationTuner Operation Basic Tuner OperationRDS Operation Programming the Remote with Codes Time. When the Program/SPL IndicatorProgramming the Remote Direct Code EntryErasing Learned Codes Code ReadoutLearning Codes from a Remote VID1/VCR VID2/TVErasing Macro Commands Macro ProgrammingPress the AVR Selector Remote With Other Devices Volume Punch-ThroughProgrammed Device Functions 4and the Mute buttonChannel Control Punch-Through Selector buttonPress the Input Selector 4you wish to Resetting the Remote Memory Function List Function ListAVR DVD Setup Code Table TV Dixi DeccaukDegraaf DoricHitachi HigashiHinari HyperMultitech MitsubishiMivar MurphyQuelle PYEQuasar RadiolaSound Wave SonokoSony StandardSetup Code Table VCR Esselte DynatechElin EuromanKenwood KambrookKansai KoenigOlympus OceanicittOceanuic OmagaStrong SonamicSontec STSSetup Code Table Cable Code Number 3 digit ListCode Number 3digit List Setup Code Table CD Optimus NSMOnkyo ProtonSetup Code Table SAT Lemon KosmosKyoto GMI Atlan LencoSKY Master SilvaSintrack SkylabSetup Code Table DVD Power Switch 1 is pushed Troubleshooting GuideProcessor Reset Troubleshooting GuideTechnical Specifications Harman Consumer International

AVR4500 specifications

The Harman-Kardon AVR4500 is a high-performance AV receiver designed to deliver an immersive audio and visual experience for home theater enthusiasts. With its robust specifications and advanced technology, the AVR4500 stands out as a leading choice for those seeking exceptional sound quality and versatility.

One of the key features of the AVR4500 is its support for multiple audio formats. It is compatible with Dolby Atmos, DTS:X, and other advanced audio technologies, allowing for three-dimensional soundscapes that enhance the cinematic experience. The receiver is equipped with a 9.2-channel configuration, providing ample power and flexibility to drive various speaker setups, including surround sound systems.

The AVR4500 uses Harman's proprietary MultEQ XT32 room calibration technology. This system intelligently analyzes the acoustics of the room and automatically adjusts the sound output to optimize listening conditions. This ensures that users hear their content as intended, regardless of the environment.

In terms of connectivity, the AVR4500 is equipped with a wide range of HDMI inputs and outputs, supporting 4K Ultra HD video and HDR formats such as Dolby Vision and HDR10. This ensures that users can experience the latest high-definition content with stunning clarity and detail. The receiver also features HDMI eARC support, allowing for high-quality audio return channels for compatible TVs.

The AVR4500 supports various streaming services, enabling users to access their favorite music and podcasts effortlessly. With built-in Wi-Fi and Bluetooth, users can stream audio directly from their smartphones or tablets. Additionally, integration with popular voice assistants makes controlling the receiver convenient and user-friendly.

Another notable characteristic of the AVR4500 is its robust power output. It is designed to deliver high-fidelity audio across all channels, ensuring that every sound is clear and richly detailed. With a stylish design featuring a premium finish, this receiver not only performs exceptionally but also adds an elegant touch to any entertainment setup.

Overall, the Harman-Kardon AVR4500 combines cutting-edge technology, outstanding audio performance, and versatile connectivity options, making it an excellent choice for anyone looking to enhance their home theater experience. Whether for movie nights, gaming sessions, or music playback, the AVR4500 offers the quality and performance that audiophiles demand.
Top Page Image Contents