Harman-Kardon AVR4500 owner manual Technical Specifications

Page 69

Technical Specifications

Audio Section

Stereo Mode

Continuous Average Power (FTC)

65 Watts per channel, 20Hz–20kHz,

@ < 0.07% THD, both channels driven into 8 ohms

Five-Channel Surround Modes

Power Per Individual Channel

Front L&R channels:

55 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

55 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround channels:

55 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High Level)

200mV/47kohms

Signal-to-Noise Ratio (IHF-A)

95dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz– 100kHz

High Instantaneous

 

Current Capability (HCC)

±35 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16 µsec

Slew Rate

40V/µsec**

FM Tuner Section

 

Frequency Range

87.5 –108MHz

Usable Sensitivity

IHF 1.3 µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo: 70/65dB (DIN)

Distortion

Mono/Stereo: 0.15/0.3%

Stereo Separation

35dB @ 1kHz

Selectivity

±300kHz: 65dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

 

Frequency Range

522–1611kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop: 500µV

Distortion

1kHz, 50% Mod: 0.8%

Selectivity

±9kHz: 30dB

Video Section

 

Video Format

PAL/NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency Response

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

Video Frequency

 

Response (Component)

10Hz-35MHz (-3dB)

General

 

Power Requirement

AC 220-240V/50Hz

Power Consumption

72W idle, 580W maximum

Dimensions (Max)

 

Width

440mm

Height

165mm

Depth

435mm

Weight

14.5 kg

Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon is a registered trademark, and Power for the digital revolution is a trademark, of Harman International Industries, Inc.

TM is a trademark of Harman International Industries, Inc. (Patent No. 5,386,478).

*Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic,” “Pro Logic II” and the Double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.

DTS and DTS Surround, DTS-ES and DTS Neo:6 are trademarks of Digital Theater Systems, Inc.

UltraStereo is a trademark of UltraStereo Corp.

VMAx is a trademark of Harman International Industries, Inc., and is an implementation of Cooper Bauck Transaural Stereo under patent license.

Logic 7 is a registered trademark of Lexicon, Inc.

Crystal is a registered trademark of Cirrus Logic Corp.

**Without input anti slewing and output isolation networks.

TECHNICAL SPECIFICATIONS 69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents AVR 4500 Audio/Video Receiver Declaration of Conformity Table of ContentsIntroduction Description and FeaturesFront panel analog A/V inputs Main Remote with Internal Codes and Learning CapabilitySafety Information Important Safety InformationUnpacking Front Panel Controls For more information Logic 7 Mode Selector /‹ Button ThisFront Panel Information Display Front Panel Information DisplaySee page 31 for more information on the Sleep function Rear Panel Connections Digital Audio Outputs Connect theseRear Panel Connections Rear Panel Connections Main Remote Control Functions Main Remote Control FunctionsEzSet Sensor Microphone Main Remote Control Functions Directly enter a radio station’s frequency ∆ Play Forward/Reverse/Stop ˚ Mute Zone II Remote Control FunctionsInstallation and Connections Installation and ConnectionsAudio Equipment Connections Video Equipment ConnectionsVideo Connection Notes Scart A/V ConnectionsVideo Video In/Out jacks, if it´s a recording VCR Important Note for Adapter CablesImportant Note for the Use SCART-Cinch Adapters RGB signals can be pathed throughSystem and Power Connections Speaker Selection Speaker PlacementUsing the On-Screen Display System ConfigurationSystem Configuration First Turn OnInput Setup Speaker SetupFront panel or Subwoofer SurroundSurround Setup Settings Keeping Independent from the Input Selected Adjustments for Other InputsDelay Settings ¤ Button Dso that the cursor is next toNight Mode Settings Output Level Adjustment Using EzSetPress and hold the SPL Indicator Select So that on is highlighted Up the Volume until you can hear the test noise clearly Operation Surround Mode ChartOFF Stereo HallControls and Use of Headphones Basic OperationSource Selection Digital Audio Playback Surround Mode Selection7y, DSP 9Amodes or Stereo $ Dolby DigitalPCM Audio Playback MP3 Audio PlaybackSelecting a Digital Source See Figure Digital Status IndicatorsNight Mode Output Level Adjustment With Source SignalsTape Recording Front Panel In/OutputsTo turn the sensor and indicator off Memory BackupChannel/8-Channel Direct Input Select to activate the sensorTurn On Volume Level Advanced FeaturesAdvanced Features Display BrightnessFull-OSD Time Out Adjustment Semi-OSD SettingsMultiroom Setup InstallationMultiroom Operation Multiroom OperationBasic Tuner Operation Tuner OperationRDS Operation Programming the Remote Time. When the Program/SPL IndicatorProgramming the Remote with Codes Direct Code EntryLearning Codes from a Remote Code ReadoutErasing Learned Codes VID1/VCR VID2/TVErasing Macro Commands Macro ProgrammingPress the AVR Selector Programmed Device Functions Volume Punch-ThroughRemote With Other Devices 4and the Mute buttonChannel Control Punch-Through Selector buttonPress the Input Selector 4you wish to Resetting the Remote Memory Function List Function ListAVR DVD Setup Code Table TV Degraaf DeccaukDixi DoricHinari HigashiHitachi HyperMivar MitsubishiMultitech MurphyQuasar PYEQuelle RadiolaSony SonokoSound Wave StandardSetup Code Table VCR Elin DynatechEsselte EuromanKansai KambrookKenwood KoenigOceanuic OceanicittOlympus OmagaSontec SonamicStrong STSSetup Code Table Cable Code Number 3 digit ListCode Number 3digit List Setup Code Table CD Onkyo NSMOptimus ProtonSetup Code Table SAT Kyoto GMI Atlan KosmosLemon LencoSintrack SilvaSKY Master SkylabSetup Code Table DVD Processor Reset Troubleshooting GuidePower Switch 1 is pushed Troubleshooting GuideTechnical Specifications Harman Consumer International

AVR4500 specifications

The Harman-Kardon AVR4500 is a high-performance AV receiver designed to deliver an immersive audio and visual experience for home theater enthusiasts. With its robust specifications and advanced technology, the AVR4500 stands out as a leading choice for those seeking exceptional sound quality and versatility.

One of the key features of the AVR4500 is its support for multiple audio formats. It is compatible with Dolby Atmos, DTS:X, and other advanced audio technologies, allowing for three-dimensional soundscapes that enhance the cinematic experience. The receiver is equipped with a 9.2-channel configuration, providing ample power and flexibility to drive various speaker setups, including surround sound systems.

The AVR4500 uses Harman's proprietary MultEQ XT32 room calibration technology. This system intelligently analyzes the acoustics of the room and automatically adjusts the sound output to optimize listening conditions. This ensures that users hear their content as intended, regardless of the environment.

In terms of connectivity, the AVR4500 is equipped with a wide range of HDMI inputs and outputs, supporting 4K Ultra HD video and HDR formats such as Dolby Vision and HDR10. This ensures that users can experience the latest high-definition content with stunning clarity and detail. The receiver also features HDMI eARC support, allowing for high-quality audio return channels for compatible TVs.

The AVR4500 supports various streaming services, enabling users to access their favorite music and podcasts effortlessly. With built-in Wi-Fi and Bluetooth, users can stream audio directly from their smartphones or tablets. Additionally, integration with popular voice assistants makes controlling the receiver convenient and user-friendly.

Another notable characteristic of the AVR4500 is its robust power output. It is designed to deliver high-fidelity audio across all channels, ensuring that every sound is clear and richly detailed. With a stylish design featuring a premium finish, this receiver not only performs exceptionally but also adds an elegant touch to any entertainment setup.

Overall, the Harman-Kardon AVR4500 combines cutting-edge technology, outstanding audio performance, and versatile connectivity options, making it an excellent choice for anyone looking to enhance their home theater experience. Whether for movie nights, gaming sessions, or music playback, the AVR4500 offers the quality and performance that audiophiles demand.
Top Page Image Contents