How To Assemble Your Steam Mop
1.Remove all the parts from the packaging.
2.Insert the upper extension tube into the lower telescopic tube. (Fig. 1) Push it in until you
hear it click into place.
3.Insert the extension tube assembly into the pump actuator. Make sure that the locking tab snaps into place. (Fig. 1)
4.Place the micro-fiber
| cleaning pad underneath | Pump |
| the mop head. Make | actuator |
| sure that the hook | |
| and latch strips are | |
| facing up. (Fig. 2) | |
| Press to secure. | |
| TIP: The micro-fiber | Fig. 1 |
| cleaning pads have |
| |
| a colored tab so that | |
| a different pad can | |
| be assigned to | Mop |
| different tasks or | head |
| rooms in the | |
| house. | |
| Hook & latch | |
| strips | |
| Fig. 2 | |
To Extend the Telescopic Tube
1.Lift the locking latch up 90°. (Fig. 3)
2.Holding the handle, extend the telescopic tube to the desired length. (Fig. 3)
3.When you have the telescopic tube to the length that you
want, close the locking latch. HELPFUL HINT: If you find the Steam Mop difficult to push/pull during use, then simply increase the height
of the pole.
Fig. 3
Filling the Water Tank IMPORTANT: Always insure that the unit is “UNPLUGGED” from the wall receptacle prior to filling and before attaching the micro-fiber cleaning pad to the bottom of the mop head. Never use the steam mop without the micro-fiber cleaning pad attached to the mop head. NOTE: When using your new steam mop for the first time you may notice water residue inside of the unit. Water drops can also be found in the packaging. This is normal and you should not be alarmed. Each steam mop is 100% tested in the factory to ensure product performance and safety. Sometimes
water is left in the unit from these test procedures. 1. Turn the cap
counter clockwise and then lift up to remove from the water tank. (Fig. 4)
2.Using the filling flask and funnel, pour one flask of water into the water tank. Do not overfill the unit past the “MAX” fill line on the water tank. (Fig. 4)
3.Replace the cap onto the water tank.
Using the Steam Mop
IMPORTANT: Never use the steam mop without the micro-fiber cleaning pad attached to the mop head or without water in the water tank.
Please note that when using for the first time, the appliance may take longer than the normal 30 second startup time to steam. You may need to pump the handle a few times before the steam is released. This is due to the water making its way from the water tank through the pump and into the heater. This will only occur during the first use.
1. | Sweep or vacuum floors before using |
| the steam mop. |
2. | Twist the quick release cord holder to |
| unwrap the power cord completely. |
3. | Plug into a 120-volt electrical outlet. |
4. | The power “On” light will turn green. |
5. | It takes approximately 30 seconds for |
| the unit to heat up and the steam to be |
| ready. |
6. | Pump the handle a few times to |
| dampen the micro-fiber cleaning pad. |
| Begin mopping with a forward and |
| backward motion, this pumping action |
| will release steam as you mop. |
7.When the water tank is empty, the steam mop will stop emitting steam. Unplug the power cord from the electrical outlet and refill the water tank following the instructions above.
8.When you have finished using the steam mop, unplug the unit from the electrical outlet and carefully remove the micro-fiber cleaning pad from the mop head. Please note that the micro- fiber cleaning pad gets very hot with the steam. Always use caution when removing.
9.Never leave the micro-fiber cleaning pad on the steam mop head when you have finished using the steam mop. Always remove the micro-fiber cleaning pad and wash in warm water with a mild detergent. Never use bleach or fabric softener when washing the reusable micro-fiber cleaning pad. The micro-fiber cleaning pad may be washed in a washing machine and dried in a clothes drier on low heat. We recommend that you air dry.
IMPORTANT: Be careful when machine washing or drying with mixed fabrics as micro-fiber pads will pick up lint from other fabrics and the hook and latch strips will stick to other garments. We recommend washing the micro-fiber cleaning pads separately or placing them in a garment bag first.
CAUTION: Never store the steam mop with a wet or damp micro-fiber cleaning pad still attached as this will damage your floors.
Care & Maintenance of the Micro- Fiber Cleaning Pad
Due to the unique cleaning ability of this pad, proper care of your micro-fiber cleaning pad is required to ensure long life and continued cleaning ability.
•The first thing you should do when you get a new micro-fiber cleaning pad is to wash and dry it. During the manufacturing process the fabric has a tendency to become flat as it picks up contaminants from the air and machinery. There will also be a number of loose threads that, while they cause no harm, can be annoying the first time you use the pad.
•To wash the micro-fiber cleaning pad, simply put it in your washing machine using the warm water setting or hand wash.
•We recommend washing your micro- fiber cleaning pads separately from other fabrics or placing them in a garment bag first if washing by machine. They have a tendency to pick up lint and other particles from other fabrics and the next time you use your micro-fiber cleaning pad, this lint will transfer to the surface being cleaned.
•ONLY USE LIQUID DETERGENTS, never use dry detergents as many times the granules do not fully dissolve and become trapped in the cleaning pad. This can scratch the surface that you are cleaning.
•NEVER USE BLEACH OR FABRIC SOFTENERS! Bleach will damage the micro-fiber fabric and fabric softeners deposit a coating on the micro-fiber fabric what will not allow the pad to clean efficiently.
•We recommend that you air dry the micro-fiber cleaning pad. If using a clothes dryer, do not put on a high heat setting as high heat will cause the micro-fiber pad to shrink and the micro-fibers to break down.
•Wash the micro-fiber cleaning pads regularly and don’t allow them get too dirty so that they will last much longer. As with any fabric, dirt particles, grease and other contaminants can cause the fibers to break down, therefore regular cleaning will help preserve your micro-fiber cleaning pads.
•As you use the micro-fiber cleaning pad, you will notice that sometimes a thread will loosen or pull out. This is normal and you should NEVER PULL AT THE LOOSE THREAD! Pulling the thread can cause the weave to come undone. Instead, simply trim the thread with a pair of sharp scissors.
