English

2Wait 30 seconds for the boiler to heat the water. Pump the handle a few times to prime the pump, activate steam and moisten the micro-fiber pad. (fig. 4)

If your Light & Easy™ Steam Mop stops steaming, it could be out of water. Unplug the power cord from the electrical outlet and refill the water tank at anytime.

fig. 4

fig. 5

3Mop with a forward and backward motion to customize steam output automatically. (fig. 5)

IMPORTANT: Never leave the Light & Easy™ Steam Mop with a damp/wet micro-fiber pad on any floor surface for any amount of time as this may damage the floor.

www.sharkclean.com

S3251_11_ENG_IB_101117.indd 7

10-11-17 1:58 PM