QUICK TIP: For easier pushing
and pulling, extend the handle length.
fig. 4
Quick Start
STEAM CLEANING
4For your comfort, you can adjust the height of the mop. Just lift the latch on the tube 90 degrees to the open position. Holding the handle, extend the tube to the desired height and then close the latch to the locked position.
5Plug in the mop. Wait 30 seconds for the unit to heat up and the steam to be ready.
Push the handle toward the mop head in a pumping motion. Customize steam output by slow or fast mopping with a forward and backward motion. (fig. 4)
NOTE: Do not leave your Steam Mop unattended during use.
IMPORTANT: Never leave the steam mop in one spot for any period of time with
adamp or wet
www.sharkclean.com
S3251_11_ENG_IB_101117.indd 5 |