Shark S3251 manual English

Page 9

English

fig. 3

fig. 2

3Insert the assembled handle piece into the steam mop base. Push the tube base together until you hear a click. (fig. 2)

4For your comfort, you can adjust the height of the mop. Just lift the latch on the tube 90 degrees to the open position. Holding the handle, extend the tube to the desired height and then close the latch to the locked position. (fig. 3)

QUICK TIP: For easier pushing and pulling, extend the handle length.

S3251_11_ENG_IB_101117.indd 3

IMPORTANT: Never use the Light & Easy™ Steam Mop without attaching

amicro-fiber cleaning pad to avoid damage to your floor and mop.

IMPORTANT: Do not use on unsealed wood or unglazed ceramic floors. On surfaces that have been treated with wax or some no wax floors, the sheen may be removed by the heat and steam action. It is always recommended to test an isolated area of the surface to be cleaned before proceeding. We recommend that you check the use and care instructions from the floor manufacturer.

www.sharkclean.com

3

10-11-17 1:58 PM

Image 9
Contents S3251 Important Safety Instructions Save These Instructions Towards PEOPLE, Animals or Plants Quick Start AssembleFill Quick Start Steam CleaningTechnical Specifications Contents Getting Started AssemblyEnglish Attaching the MICRO-FIBER PAD Filling the Water Tank Reference the troubleshooting section Using Your Light & Easy Steam MopEnglish After USE and Storage Care of Your Light & Easy Steam MopCare of Your Light & Easy Steam Mop Floor Trouble ShootingEnglish Toll Free ONE 1 Year Limited Warranty EURO-PRO Operating LLC