Bissell 9500-p warranty Troubleshooting, Thank you for selecting a Bissell product

Page 20

Troubleshooting

Built-in heater ready light does not illuminate

Possible causes

1.The heater switch is not turned ON ( I )

2.The power switch is not turned ON ( I )

Reduce Spray or No Spray

Possible causes

1.Water tank may be empty

2.Formula tank may be empty

Remedies

1.Turn the heater switch ON ( I )

2.Both switches must be ON ( I ) to activate the heater ready light

Remedies

1.Fill heavy duty bladder with hot tap water

2.Fill formula tank with BISSELL 2X Formula for cleaning

3.Tank may not be seated completely

4.Pump may have lost prime.

DirtLifter® PowerBrush does not turn

Possible causes

1.The belt is off or broken

3.Turn power OFF (0). Remove and reseat tank

4.Turn power OFF (0) and then back ON (I). Wait one minute, then depress trigger

Remedies

1.Turn power OFF ( O ) and unplug unit from outlet. Follow instructions on page 19

2.

The unit is in the upright position

2.

Brushes only rotate when unit is reclined using the

 

 

 

detent pedal

3.

Circuit breaker on machine may have tripped

3.

Turn the machine OFF ( O ) and unplug from outlet. Check

 

 

 

to see if foreign object is caught in brush roll. Remove

Cleaner not picking up solution

 

object. Plug machine in to reset circuit breaker

 

 

Possible causes

Remedies

1.

ReadyTools dial may be at wrong setting

1.

Set ReadyTools dial to either FLOOR CLEANING or TOOLS setting

2.

Tank may not be seated properly

2.

Pick up both the 2-in-1 water tank and formula tank and

 

 

 

reseat them so they fit snugly on the unit

3.

Tank may not be assembled properly

3.

Check to make sure the "lip" of the nozzle is securely

 

 

 

hooked into the groove on bottom of Tank (see page 10)

4.Solution or 2-in-1 water tank is empty

5.2-in-1 water tank has picked up maximum dirty water and red float door has closed.

6.Red float "door" in the tank may have closed as a result of bumping an object or moving machine back and forth too quickly

4.Check fluid levels in heavy duty bladder and formula tank.

5.Empty 2-in-1 water tank. Refill heavy duty bladder with clean hot tap water and replace.

6.Turn the machine OFF ( O ), allowing red float door to release into the open position. Turn unit back ON ( I ) to continue cleaning. Be sure your forward and backward strokes are done at a slower pace.

7. Red lint screen is dirty.

7. Clean red lint screen (see page 17).

Other maintenance or service not included in the manual should be performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of

service. Contact us directly at 1-800-237-7691.

20 w w w. b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Earn Bissell Rewards 9500-PW w. b i s s e l l . c o m 0 3 7 6 9 Read all instructions before using your ProHeat 2X CleanShot To reduce the risk of fire, electric shock, or injuryProduct view Lower Base Dry Aire Edge Sweep BrushesCleaning fluid Cord WrapRack Latch HolderSpecial features Built-in-heater featureAssembly OperationsCustom Clean CleanShotFlow indicator Dry AireReadyTools dial Scotchgard ProtectorBefore you clean Option B CleanShotPretreating optional Option a Bissell Tough Stain PreTreatSet ReadyTools Dial to the floor cleaning setting Carpet cleaningFill the heavy duty bladder with clean Hot tap water Heater Switch Clean Shot Manufacturer’s tag Cleaning with attachmentsPlug in and turn on the power switch and heater if desired Return ReadyTools dial to floor setting Deep reach tool attachmentStain removal Hard floor cleaning Machine care Maintenance and careMachine storage Important cord side down Small belt removal and replacementAfter carpet is dry, vacuum again to remove hair and fuzz Brush removal and large belt replacement Bissell Consumer Care atTroubleshooting Thank you for selecting a Bissell productReplacement parts Bissell ProHeat Part Name16 17 203-6611Accessories Bissell ProHeat 203-6651 Tough Stain Tool 203-6652Warranty Bissell ProHeat Limited Two Year WarrantyIf your Bissell product should require service Website or E-mail Or CallBissell consumer care Dont forget to register your product
Related manuals
Manual 2 pages 60.39 Kb

9500-p specifications

The Bissell 9500-P, commonly known for its robust carpet cleaning capabilities, stands out in the realm of home cleaning appliances. Designed with cutting-edge features and technologies, this model ensures an efficient and thorough clean for various carpet types, upholstery, and other surfaces.

One of the primary features of the Bissell 9500-P is its powerful suction. This model is equipped with a strong motor that provides deep cleaning performance. The combination of intense suction and specialized brushes helps to lift dirt, stains, and allergens from carpets, leaving them looking revitalized and fresh.

Additionally, the Bissell 9500-P utilizes the innovative Heatwave Technology. This feature maintains consistent water temperature throughout the cleaning process, optimizing the effectiveness of cleaning solutions. By ensuring that the water remains at an ideal temperature, users can achieve better stain removal and a deeper clean.

The cleaning path of the Bissell 9500-P is another highlight. Its wide cleaning head covers more area in less time, making it efficient for larger rooms or entire homes. This not only reduces the time spent cleaning but also ensures a uniform clean without missing any spots.

Furthermore, this model includes a built-in hot water heater, which allows for the use of heated water to enhance cleaning power. Heated water effectively loosens tough stains, making them easier to remove and ensuring a comprehensive clean.

The Bissell 9500-P also features a two-tank system. One tank is dedicated to clean water and the cleaning solution, while the other is for dirty water. This separation ensures that users always apply clean water and solution, enhancing the cleaning outcome and preventing dirty water from being reapplied to surfaces.

User-friendly design is also a significant characteristic of the Bissell 9500-P. It comes with an adjustable handle for users of different heights and a lightweight frame for easy maneuverability. Moreover, the machine features a variety of included attachments, such as a stair tool and upholstery brush, making it versatile for cleaning various household surfaces.

In conclusion, the Bissell 9500-P embodies a blend of technology, versatility, and user-centric design. With powerful suction, Heatwave Technology, a wide cleaning path, and a two-tank system, it provides an unparalleled cleaning experience for anyone looking to maintain pristine carpets and upholstery in their home.
Top Page Image Contents