Operations
Cleaning with attachments continued
3.Attach Hose
A.Connect solution hose to the hose connection point on unit, next to flow indicator. Insert hose and turn clockwise until locked into place.
B.Open hose latch on the front of the unit and insert hose into place. Turn clockwise until locked into place.
4.Attach the cleaning tool to the end of the 3B. hose.
5.Clean by pressing the red trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed. Caution: Do Not Overwet
6.Remove and rinse tool in clean running water. Let dry completely.
7.Remove and rinse hose in clean, running water. Let dry completely.
8.Empty dirty and clean water tanks and rinse following instructions on page 13.
3A.
3B.
4.
5.
10 w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |