Troubleshooting
Reduce Spray or No Spray
Possible causes
1.Water tank may be empty
2.Tank may not be seated completely
3.Pump may have lost prime.
4.Debris filter on base is clogged
WARNING:
To reduce the risk of fire, electric shock, or injury,turn power OFF and disconnect plug from electrical outlet before performing maintenance or troubleshooting.
Remedies
1.Fill clean tank with hot tap water
2.Turn power OFF (0). Remove and reseat tank.
3.Turn power OFF (0) and then back ON (I). Wait one minute, then depress trigger
4.Use hand to remove debris
DirtLifter® PowerBrush does not turn
Possible causes | Remedies | ||
1. | The belt is off or broken | 1. | Turn power OFF ( O ) and unplug unit from outlet. Follow |
|
|
| instructions on page 14 |
2. | The unit is in the upright position | 2. | Brushes only rotate when unit is reclined using the |
|
|
| detent pedal |
3. | Circuit breaker on machine may have tripped | 3. | Turn the machine OFF ( O ) and unplug from outlet. Check |
|
|
| to see if foreign object is caught in brush roll. Remove |
object. Plug machine in to reset circuit breaker
Cleaner not picking up solution
Possible causes
1.Tanks may not be seated properly
2.Clean water tank is empty
3.Dirty water tank has picked up the maximum amount of dirty water the red float door has closed
4.Red float “door” in the tank may have closed as a result of bumping an object or moving machine back and forth too quickly
5.Front nozzle of machine is clogged
6.Upper body filter is clogged
Remedies
1.Pick up both the clean and dirty water tanks and reseat them so they fit snuggly on the unit
2.Check fluid levels in clean water tank and refill if necessary
3.Empty dirty water tank. Refill clean water tank with water and formula. Place both tanks back onto unit
4.Turn the machine OFF(0), allowing red float door to release into the open position,. Turn the unit back ON (I) to continue cleaning. Be sure your forward and backward strokes are completed at a slower pace
5.Use fingers to remove any debris from this area
6.Use fingers to remove any debris from this area
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at
16 w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |