Operations
Carpet cleaning
1.Remove dirty water tank. Pull dirty water tank handle to upright position and lift up to remove dirty water tank.
2.Lift clean water tank from the base of machine.
A.Unscrew cap on top of the clean water tank. Fill tank to FILL line with clean, hot tap water.
B.Measure BISSELL formula using cap on tank. Fill cap to line twice for each full tank of water. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine
C.Screw cap back onto clean water tank and place tank onto base of the machine.
3.Replace dirty water tank securely on top of the clean water tank and push handle back to lock into place.
4.Plug into a proper outlet and turn the power switch to the ON ( I ) position.
5.Detent handle by pushing down on the green lever on the back of the machine while pulling back.
6.Cleaning strokes. While pressing the trigger, make one slow forward wet pass and another back. Let the formula and DirtLifter PowerBrushes do the work for you.
Note: Your machine is equipped with a circuit breaker that will automatically shut off the brush if a large or loose object is caught in the brush roll. If that happens, be sure to unplug your machine, remove the foreign object and then plug machine in to reset the circuit breaker.
1.1.
2.2A.
2C.
3.3.
5.
Keep plenty of genuine BISSELL 2X formula on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.
7
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |