Hoover Shampoo- Polisher Completing the task, Dry-cleaning carpet, Brush pile, Vacuum dry carpet

Page 17

Repeat the process over another 3 ft. x 3 ft. area (Im x Im), overlapping the areas by several inches. Continue until a 3 ft. (Im) length the width of the carpet or rug has been cleaned.

Note: The “WET PICKUP” is used only when removing liquids from hard surface floors. Do not use “WET PICKUP” on carpeting.

Completing the task

5. Brush pile

Brush pile in one direction with a long-handled brush. This speeds drying and gives a uniform ap- pearance. Use a forward and backward stroke. After determin- ing which direction looks best, the last strokes should be in the same direction on all areas of the carpet. Repeat the process of shampooing and brushing until the entire carpet or rug has been cleaned.

6. Allow carpet to dry

The length of time for drying varies; however, overnight drying is desira- ble whenever possible. The use of an electric fan to speed drying is help- ful. If it is necessary to walk on the carpet before it is dry, place towels or white cloths on the traffic areas. If furniture must be replaced before the carpet is dry, use plastic or aluminum foil pads under legs of furni- ture so metal slides or wood finishes will not stain the carpet or rug.

7. Vacuum dry carpet

Vacuum area thoroughly after it is dry to remove the dry detergent and the dirt loosened by the cleaning process. Frequent vacuuming during the first week after shampooing will enhance the appearance of the carpet.

Dry-cleaning carpet

The shampoo-polisher may be used to work dry-cleaning compounds or powders into carpet or rugs. Do not put these substances into the tank and be sure shampoo brushes are dry. Test a small area of carpet for colorfastness by sprinkling a small amount of powder and wiping with a white cloth. Then check for texture change by using shampoo-polisher with dry brushes in the same area. If color and texture are not affected, follow directions on container for amounts to use and drying time. After compound has dried, vacuum area thoroughly. Install a new disposable bag in vacuum cleaner to insure complete removal of cleaning com- pound and dirt. Frequent bag changes may be necessary when a powdered dry-cleaning compound is used.

16

Image 17
Contents 0vi@@ Save Index Fill in and retainImportant Safeguards Unpacking Questions or Concerns? Control button AssemblyHow to use To fill tank TankTo empty tank Attach and remove brushes and padsTo carry StoringCleaning floors Water method Do not use the water cleaning method on wood or cork floorsWaxing floors Solvent cleaning wax methodWater-base wax Solvent-base waxPolishing and buffing floors To keep floors bright and shiny Quick pickupsTo achieve a high lustre finish Before you begin Shampooing carpet and rugsTest for colorfastness Check effect of shampoo brushesAttach rug shampoo accessory Shampoo inaccessible areasReady, set, shampoo Vacuum thoroughlyShampoo carpet or rug Fill tankCompleting the task Dry-cleaning carpetBrush pile Allow carpet to dryTank and tubing MaintenanceFurniture guard Base of unitBrushes Filter barFelt and high lustre polishing pads Defoamer cakeIf you have a problem ServiceLubrication Servicing of Double Insulated AppliaticesFloor care hints Accessories