GE PNSF35B, GXSF23Z01 Set Regeneration Starting Time, Normal Operation, Control Displays

Page 7

Set Regeneration (Starting) Time

NOTE: RECHARGE TIME and a flashing 2:00 AM (factory default) should show in the display. This is a good time for regeneration to start (over in about 2 hours) in most households because water is not in use. HARD WATER is bypassed to house faucets during regeneration. See the Automatic Hard Water Bypass During Regeneration section.

1

Press the UP or DOWN button to set the

 

desired regeneration start time.

NOTE: Each press of the buttons changes the time by one hour. Holding the buttons in changes the time twice each second.

Be sure to observe the AM or PM

RECHARGE TIME

PM

as you

did when setting the time of day.

 

 

 

 

 

Press the SELECT button once more.

 

 

2

 

 

 

 

The display shows the present time of day and

 

 

RECHARGE TONIGHT RECHARGE TONIGHT PM .

 

 

Normal Operation, Control Displays

During normal operation, the present time of day and AM or PM show in the control display PM

RECHARGE

area. When the demand computer determines a regeneration is needed, RECHARGE TONIGHT begins to

flash in the display along with the present time. RECHARGE TONIGHT PM flashes until the next

RECHARGE TONIGHT

regeneration start time, then changes to RECHARGE NOW, which flashes until the regeneration is over.

Feature: Optional Recharge Controls

Sometimes, a manually started regeneration (recharge) may be desired or needed. Two

examples:

■You have used more water than usual (house guests, extra washing, etc.) and you may run out of soft water before the next regeneration.

■You did not refill the storage tank with salt.

Use one of the following features to start a regeneration immediately, or at the next preset regeneration start time.

RECHARGE TONIGHT PM

RECHARGE TONIGHT

Touch (do not hold) the TOUCH or HOLD button. RECHARGE TONIGHT flashes in the control display area. A regeneration will occur at the next preset regeneration start time. If you decide to cancel this regeneration, touch the same button once more.

RECHARGE NOW

PM

 

RECHARGE NOW

Press and hold the TOUCH or HOLD button until RECHARGE NOW starts to flash in the control display area. The water softening system begins an immediate regeneration and, when over in about two hours, you will have a new supply of soft water. Once started, you cannot cancel this regeneration.

Feature: Program Memory

If electrical power to the water softening system is interrupted, the control display is blank, but the control keeps correct time for about six hours.

When power is restored, you have to reset the present time only if the display is flashing. All other settings are maintained and never require resetting unless a change is desired.

If the time is flashing after a long power outage, the water softening system continues to work as it should to provide you with soft water. However, regenerations may occur at the wrong time of day until you reset the control to the correct time of day.

Feature/Service: Automatic Electronic Diagnostics

The control computer has a self-diagnostic function for the electrical system (except input power and water meter). The computer monitors the electronic components and circuits for correct operation. If a malfunction occurs, an error code appears in the control display.

The chart on Error Codes shows the error codes that could appear and possible reasons for each code. While an error code is displayed, all control buttons are inoperable except for the SELECT button. SELECT remains operational so the service person can make the Manually Initiated Electronic Diagnostics to further isolate the defect and check the water meter.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Part No C1002P008 Pub. No -500357-99 JR Water Softening SystemOperating Instructions Safety InformationService Telephone Congratulations You are Now Part of the GE FamilySafety Precautions Rated capacity Specification guidelinesService flow rate Water temperature maximum FAbout the water softener system Set Water Hardness Number Control Settings RequiredSpecification Guidelines table on Set Present Time of DaySet Regeneration Starting Time Feature Optional Recharge ControlsFeature Program Memory Feature/Service Automatic Electronic DiagnosticsERR Service Control/Softener, Service Checkout ProcedureTo remove an error code 1 Unplug transformer Power lossOperating If the water softening system does not draw brine, check Care and cleaning of the water softening systemElectronic Diagnostics Checking the Salt Storage Level and RefillingSanitizing Procedure Cleaning Iron Out of the Water Softening SystemBreaking a Salt Bridge Care and cleaning of the water softener systemClean the Nozzle and Venturi Assembly Tighten the cap or housingBefore you call for service… Water Problem Possible Causes What To Do No soft waterWater. Note Be sure sample Single lever kitchen faucet, ifPage Page We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Warrantor General Electric Company. Louisville, KY GE Water Softening System WarrantyGE Will Replace What GE Will Not CoverGE Answer Center Service Telephone Numbers

GXSF23Z01, PNSF35B specifications

The GE PNSF35B and GXSF23Z01 are two advanced models of refrigerators manufactured by General Electric, renowned for their innovation and commitment to energy efficiency. These refrigerators incorporate a range of cutting-edge technologies aimed at enhancing food preservation while maintaining a user-friendly interface.

The GE PNSF35B stands out due to its spacious interior and high storage capacity, designed to meet the needs of families and individuals alike. With a counter-depth design, it seamlessly blends into kitchen cabinetry, providing a sleek appearance without sacrificing space. One of the primary features of the PNSF35B is the Advanced Cooling System, which ensures a consistent temperature throughout the refrigerator. This feature is crucial for preserving the freshness of fruits, vegetables, and perishable goods.

Another notable characteristic of the PNSF35B is its smart technology integration. It comes equipped with Wi-Fi connectivity, allowing users to control the appliance remotely through a mobile app. This capability includes temperature adjustments, alerts for door openings, and even a grocery list feature, providing convenience for the modern consumer.

On the other hand, the GXSF23Z01 model is designed with a focus on sustainability and energy efficiency. It features the Energy Star certification, indicating its ability to reduce energy consumption without compromising performance. This model incorporates LED lighting that not only enhances visibility but also consumes less energy compared to traditional lighting solutions.

The GXSF23Z01 also boasts a unique water and ice dispenser, which provides chilled water and ice at the touch of a button. This feature is optimized for ease of use, making it an essential addition to any kitchen. Moreover, the model includes adjustable shelving and a versatile interior layout, allowing users to customize the storage experience to accommodate various food and beverage items.

In conclusion, both the GE PNSF35B and GXSF23Z01 refrigerators encapsulate General Electric's commitment to quality, innovation, and sustainability. With their modern designs, advanced cooling technologies, and user-friendly features, these models are ideal choices for consumers seeking reliable and efficient refrigeration solutions that cater to contemporary lifestyles.
Top Page Image Contents