Harman-Kardon AVR 235 owner manual Speaker Selection, Speaker Placement

Page 15

Installation and Connections

Speaker Selection

No matter which type or brand of speakers is used, the same model or brand of speaker should be used for the front-left, center and front-right speakers. This creates a seamless front soundstage and eliminates the possibility of distracting sonic disturbances that occur when a sound moves across mismatched front-channel speakers.

Speaker Placement

The placement of speakers in a multichannel home-theater system can have a noticeable impact on the quality of sound reproduced.

Depending on the type of center-channel speaker in use and your viewing device, place the center speaker either directly above or below your TV, or in the center behind a perforated front-projection screen.

Once the center-channel speaker is installed, position the left-front and right-front speakers so that they are as far away from one another as the center-channel speaker is from the preferred listening position. Ideally, the front-channel speakers should be placed so that their tweeters are no more than 60cm above or below the tweeter in the center-channel speaker.

They should also be at least 0.5 meter from your TV set unless the speakers are magnetically shielded to avoid colourings on the TV screen. Note that most speakers are not shielded, even with complete surround sets only the Center speaker may be.

Depending on the specifics of your room acoustics and the type of speakers in use, you may find that imaging is improved by moving the front-left and front-right speakers slightly forward of the center-channel speaker. If possible, adjust all front loudspeakers so that they are aimed at ear height when you are seated in the listening position.

Using these guidelines, you’ll find that it takes some experimentation to find the correct location for the front speakers in your particular installation. Don’t be afraid to move things around until the system sounds correct. Optimize your speakers so that audio transitions across the front of the room sound smooth.

When the AVR is used in 5.1-channel operation, the preferred location for surround speakers is on the side walls of the room, at or slightly behind the listening position. In a 7.1-channel system, both side surround and back surround speakers are required. The center of the speaker should face you (see below).

As with the side speakers, rear surround speakers should be located so that the bottom of the cabinet is at least two feet higher than the listeners’ ears. The speakers should be no more than six feet behind the rear of the seating area.

If dipole-type speakers are used on either the side or rear walls of the room, please note that if there are arrows on the speakers they should face the front of the room for the side speakers, or toward the center of the wall for the rear speakers.

It is appropriate to configure the AVR 235 for either 5.1- or 7.1-channel operation, but not for

6.1channels. When 6.1-channel program material or a 6.1-channel processing mode is in use, material for the surround back channel will be outputted simultaneously through both the Surround Back Left and Right Speaker Outputs . Connecting only one loudspeaker to these speaker terminals will not only deprive you of the benefits of 7.1-channel surround modes, such as Logic 7, but will also interfere with the functioning of EzSet speaker calibration, as described on page 23. It may also put undesirable strain on the surround back amplifier circuits and power supplies.

Subwoofers produce largely nondirectional sound, so they may be placed almost anywhere in a room. Actual placement should be based on room size and shape and the type of subwoofer used. One method of finding the optimal location for a subwoofer is to begin by placing it in the front of the room, about 15cm from a wall, or near the front corner of the room. Another method is to temporarily place the subwoofer in the spot where you will normally sit, and then walk around the room until you find a spot where the subwoofer sounds best. Place the subwoofer in that spot. You should also follow the instructions of the subwoofer’s manufacturer, or you may wish to experiment with the best location for a subwoofer in your listening room.

Center Front Speaker

No more than 60cm

Left Front

 

Right Front

Speaker

 

Speaker

A)Front Channel Speaker Installation with Direct-View TV Sets or Rear-Screen Projectors

 

 

TV or Projection Screen

 

 

Left Front

Center Front

Right Front

 

Speaker

 

Speaker

Speaker

 

 

No more than 6 feet

when rear-mounted speakers are used

Rear-Wall Mounting

 

 

 

 

 

7.1

 

7.1

B)Rear-wall speaker mounting using the positions marked “7.1” is an alternate location for 5.1 systems, and it should also be used for full 7.1 systems when an optional, external power amplifier is used to power the rear speakers.

At least 15 cm from celling

At least 60 cm

INSTALLATION AND CONNECTIONS 15

Image 15
Contents AVR 235 Audio/Video Receiver Declaration of Conformity Table of ContentsDescription and Features IntroductionFront panel analog A/V inputs Safety Information Important Safety InformationUnpacking Front Panel Controls # Preset Stations Selector Press this Digital Input Selector When playing aInformation on digital audio Digital Audio Outputs Connect these Rear Panel Connections+ and negative terminals Unswitched Outlet› Button Speaker Select Mute Main Remote Control FunctionsSee page 31 for more information Channel/8 Channel Direct InputMain Remote Control Functions Channel Direct Inputs External Amplifier Connections Installation and ConnectionsAudio Equipment Connections Output jacksScart A/V Connections Video Equipment ConnectionsWatts System and Power ConnectionsMain Room Remote Control Extension AC Power ConnectionsSpeaker Selection Speaker PlacementFirst Turn On System ConfigurationUsing the On-Screen Display System SetupInput Setup Speaker SetupSet Button Fto bring up the Speaker Setup menu Figure Subwoofer Within five seconds, either press the ‹/› buttons ¤ Button Dso that the cursor is next to Surround SetupSetting to your taste Night Mode SettingsStereo-Direct Bypass Mode Configuring the Surround Off Stereo ModesTo call up the menu Stereo-Digital ModeDelay Settings Installed and Dolby Digital chosen as the sur- round modeOutput Level Adjustment Using EzSetPress and hold the SPL Indicator Select Volume until you can hear the test noise clearly When all channels have the same output levelIs then pressed to select OFF in the highlighted video System Configuration Surround Mode Chart OperationChannel Direct Inputs Two-channel stereo program is being played No delay availableMix of the in-phase material of the left and right channels DTS Neo6 MusicBasic Operation Source SelectionChannel/8-Channel Direct Input Surround Mode Selection Volume Up/Down buttonsButton PCM Audio Playback Digital Bitstream IndicatorsDigital Audio Playback Dolby DigitalPCM Playback Indications Surround Mode TypesSpeaker/Channel Indicators Audio, while the main feature is availableTape Recording Output Level Adjustment With Source SignalsFront-Panel-Display Fade Operation Advanced FeaturesMemory Backup Indicator SelectDisplay Brightness Turn On Volume LevelSemi-OSD Settings Full-OSD Time Out AdjustmentDefault Surround Mode Tuner OperationBasic Tuner Operation Program Search PTY RDS TuningRDS Operation RDS Display OptionsProgramming the Remote Programming the Remote with CodesCode Readout Volume Punch-Through Macro ProgrammingProgrammed Device Functions Resetting the Remote Memory Channel Control Punch-ThroughBy the AVR Input Selector SPL Function ListAVR DVD Remote sensor ¯ is obscured Troubleshooting GuideProcessor Reset Power Switch 1 is pushedTechnical Specifications Harman Consumer Group International

AVR 235 specifications

The Harman-Kardon AVR 235 is a high-performance AV receiver that exemplifies the brand's commitment to delivering high-fidelity sound and cutting-edge technology. Designed for home theater enthusiasts, it combines a sleek aesthetic with powerful audio performance, making it an appealing choice for those looking to elevate their cinematic experience.

One of the standout features of the AVR 235 is its 7.1-channel surround sound capability, allowing for a truly immersive audio experience. It can deliver up to 70 watts per channel, ensuring that every sound, from the softest whisper to the loudest explosion, is reproduced with clarity and power. The receiver supports various surround sound formats, including Dolby Digital, Dolby Pro Logic II, and DTS, providing users with a versatile listening experience tailored to any content.

The AVR 235 integrates several advanced technologies to improve sound quality. This includes Harman-Kardon's proprietary "Logic 7" technology, which enhances stereo sources to provide a more expansive surround sound experience. Its advanced DSP (Digital Signal Processing) algorithms further optimize the audio signals, ensuring that the sound is not only powerful but also richly detailed and accurate.

Connectivity options abound with the AVR 235, facilitating a range of devices to be hooked up effortlessly. It features multiple HDMI inputs, component and composite video inputs, as well as analog and digital audio inputs. This extensive range of connections allows for seamless integration with Blu-ray players, gaming consoles, streaming devices, and more, making it a versatile hub for home entertainment.

The AVR 235 also places a strong emphasis on user-friendliness, boasting an intuitive on-screen display and a user-friendly remote control. The graphical user interface guides users through the setup process and offers various adjustments to accommodate different room acoustics and personal preferences.

Additionally, the AVR 235 supports multi-room audio configurations, enabling users to enjoy sound throughout the house. It features an integrated AM/FM tuner, allowing access to radio stations, and provides options for connecting to external audio sources.

In summary, the Harman-Kardon AVR 235 is a powerful and feature-rich AV receiver that delivers exceptional sound quality and versatility. Its advanced technologies, extensive connectivity options, and user-friendly design make it an excellent choice for anyone looking to enhance their home theater system and enjoy a superior audio experience. With the AVR 235, Harman-Kardon once again proves its prowess in the world of high-fidelity audio.