Harman-Kardon AVR 235 Basic Operation, Source Selection, Channel/8-Channel Direct Input

Page 28

Operation

Basic Operation

Once you have completed the setup and configu- ration of the AVR, it is simple to operate and enjoy. The following instructions should be followed for you to maximize your enjoyment of your new receiver:

Turning the AVR On or Off

•When using the AVR for the first time, you must press the Main Power Switch 1on the front panel to turn the unit on. This places the unit in a Standby mode, as indicated by the amber color of the Power Indicator 3. Once the unit is in Standby, you may begin a listening session by pressing the System Power Control 2or the Source button %on the front panel or the AVR Selector 5. Note that the Power Indicator 3will turn blue. This will turn the unit on and return it to the input source that was last used. The unit may also be turned on from Standby by pressing any of the Source Selector buttons on the remote 4567or the Source button %on the front panel.

NOTE: After pressing one of the Input Selector buttons 4(except VID4) to turn the unit on, press the AVR Selector 5to have the remote control the AVR functions.

To turn the unit off at the end of a listening ses- sion, simply press the System Power Control

2on the front panel or the Power Off Button 3on the remote. Power will be shut off to any equipment plugged into the rear panel

Switched AC Outlets and the Power

Indicator 3will turn orange.

When the remote is used to turn the unit “off” it is actually placing the system in a Standby mode, as indicated by the orange color of the Power Indicator 3.

When you will be away from home for an extended period of time it is always a good idea to completely turn the unit off with the front panel Main Power Switch 1.

NOTE: All preset memories may be lost if the unit is left turned off with the Main Power Switch 1for more than two weeks.

Using the Sleep Timer

•To program the AVR for automatic turn-off, press the Sleep Button 9on the remote. Each press of the button will increase the time before shut down in the following sequence:

 

 

 

90

 

80

 

 

70

 

 

60

 

 

50

 

 

 

 

min

 

min

 

min

 

min

 

 

 

min

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

40

 

30

 

 

20

 

 

10

 

 

 

OFF

 

 

 

min

 

min

 

min

 

min

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The sleep time will be displayed in the Main Information Display ˜and it will count down until the time has elapsed.

When the programmed sleep time has elapsed, the unit will automatically turn off (to Standby mode). Note that the front panel display will dim to one half brightness when the Sleep function is programmed. To cancel the Sleep function, press and hold the Sleep Button 9until the infor- mation display returns to normal brightness and the Sleep indicator numbers disappear and the words SLEEP OFF appear in the Main Information Display ˜.

Source Selection

•To select a source, press any of the Source Selector buttons on the remote 46.

NOTE: After pressing one of the Input Selector buttons 4to turn the unit on, press the

AVR Selector 5to have the remote control the AVR functions.

•The input source may also be changed by pressing the front-panel Input Source Selector button %. Each press of the button will move the input selection through the list of available inputs.

•As the input is changed, the AVR will auto- matically switch to the digital input (if selected), surround mode and speaker configuration that were entered during the configuration process for that source.

•The front-panelVideo 4 Inputs Ô, Optical Digital 3 Input *or the Coaxial Digital 3 Input Ómay be used to connect a device such as a video game or camcorder to your home entertainment system on a temporary basis.

•As the input source is changed, the new input name will appear momentarily as an on-screen display in the lower third of the video display.

The input name will also appear in the Main Information Display ˜and a blue LED will light next to the selected input’s name in the front-panelInput Indicators ˆ.

•When a pure audio input (CD, Tuner, Tape,

6/8 Channel Input) is selected, the last video input used remains routed to the Video Out-

puts and Video Monitor Output . This permits simultaneous viewing and listening to different sources.

•When a Video source is selected, its audio signal will be fed to the speakers and the video signal for that input will be routed to the appro-

priate Monitor Output Jack and will be view- able on a TV monitor connected to the AVR. If a component video source is connected to the DVD

or Video 2 Component Inputs, it will be routed to the Component Video Outputs . Make certain that your TV is set to the proper input to view the appropriate video signal (composite, S-Video or component video, see Notes for S- Video on page 13).

6-Channel/8-Channel Direct Input

•There are two input choices available for use with sources such as a DVD-Audio or SACD play- er that are connected to the 8-Channel Direct Inputs . Select the appropriate input accord- ing to the way your system and source equip- ment is configured:

•The 6 CH DIRECT INPUT should be used when the SBR and SBL inputs are NOT in use and the input source device has its own internal bass management system. This input passes the input from the source directly through to the volume control without any analog to digi- tal conversion and it mutes the unused input jacks to prevent unwanted noise from interfering with system performance.

•The 8 CH DIRECT INPUT should be used when an input is connected to all eight

8-Channel Direct Inputs and when the

input source device has its own internal bass management system. This input passes the input from the source directly through to the volume control without any analog to digital conversion and it mutes the unused input jacks to prevent unwanted noise from interfering with system performance.

Note that when the 6-Channel or 8-Channel Direct Input is in use, you may not select a sur- round mode, as the external decoder determines the processing in use. In addition, there is no signal at the record outputs or bass management when the 6-Channel or 8-Channel Direct Input is in use and the tone or balance controls will not function.

28OPERATION

Page 27 Page 29
Image 28
Page 27 Page 29
Contents AVR 235 Audio/Video Receiver Table of Contents Declaration of ConformityIntroduction Description and FeaturesFront panel analog A/V inputs Important Safety Information Safety InformationUnpacking Front Panel Controls Digital Input Selector When playing a # Preset Stations Selector Press thisInformation on digital audio Rear Panel Connections Digital Audio Outputs Connect theseUnswitched Outlet + and negative terminalsMain Remote Control Functions › Button Speaker Select MuteChannel/8 Channel Direct Input See page 31 for more informationMain Remote Control Functions Installation and Connections Audio Equipment ConnectionsOutput jacks Channel Direct Inputs External Amplifier ConnectionsVideo Equipment Connections Scart A/V ConnectionsSystem and Power Connections Main Room Remote Control ExtensionAC Power Connections WattsSpeaker Placement Speaker SelectionSystem Configuration Using the On-Screen DisplaySystem Setup First Turn OnSpeaker Setup Input SetupSet Button Fto bring up the Speaker Setup menu Figure Subwoofer Within five seconds, either press the ‹/› buttons Surround Setup Setting to your tasteNight Mode Settings ¤ Button Dso that the cursor is next toConfiguring the Surround Off Stereo Modes Stereo-Direct Bypass ModeStereo-Digital Mode Delay SettingsInstalled and Dolby Digital chosen as the sur- round mode To call up the menuUsing EzSet Output Level AdjustmentPress and hold the SPL Indicator Select When all channels have the same output level Volume until you can hear the test noise clearlyIs then pressed to select OFF in the highlighted video System Configuration Operation Surround Mode ChartChannel Direct Inputs No delay available Mix of the in-phase material of the left and right channelsDTS Neo6 Music Two-channel stereo program is being playedSource Selection Basic OperationChannel/8-Channel Direct Input Volume Up/Down buttons Surround Mode SelectionButton Digital Bitstream Indicators Digital Audio PlaybackDolby Digital PCM Audio PlaybackSurround Mode Types Speaker/Channel IndicatorsAudio, while the main feature is available PCM Playback IndicationsOutput Level Adjustment With Source Signals Tape RecordingOperation Advanced Features Memory BackupIndicator Select Front-Panel-Display FadeTurn On Volume Level Semi-OSD SettingsFull-OSD Time Out Adjustment Display BrightnessTuner Operation Default Surround ModeBasic Tuner Operation RDS Tuning RDS OperationRDS Display Options Program Search PTYProgramming the Remote with Codes Programming the RemoteCode Readout Macro Programming Volume Punch-ThroughProgrammed Device Functions Channel Control Punch-Through Resetting the Remote MemoryBy the AVR Input Selector Function List SPLAVR DVD Troubleshooting Guide Processor ResetPower Switch 1 is pushed Remote sensor ¯ is obscuredTechnical Specifications Harman Consumer Group International

AVR 235 specifications

The Harman-Kardon AVR 235 is a high-performance AV receiver that exemplifies the brand's commitment to delivering high-fidelity sound and cutting-edge technology. Designed for home theater enthusiasts, it combines a sleek aesthetic with powerful audio performance, making it an appealing choice for those looking to elevate their cinematic experience.

One of the standout features of the AVR 235 is its 7.1-channel surround sound capability, allowing for a truly immersive audio experience. It can deliver up to 70 watts per channel, ensuring that every sound, from the softest whisper to the loudest explosion, is reproduced with clarity and power. The receiver supports various surround sound formats, including Dolby Digital, Dolby Pro Logic II, and DTS, providing users with a versatile listening experience tailored to any content.

The AVR 235 integrates several advanced technologies to improve sound quality. This includes Harman-Kardon's proprietary "Logic 7" technology, which enhances stereo sources to provide a more expansive surround sound experience. Its advanced DSP (Digital Signal Processing) algorithms further optimize the audio signals, ensuring that the sound is not only powerful but also richly detailed and accurate.

Connectivity options abound with the AVR 235, facilitating a range of devices to be hooked up effortlessly. It features multiple HDMI inputs, component and composite video inputs, as well as analog and digital audio inputs. This extensive range of connections allows for seamless integration with Blu-ray players, gaming consoles, streaming devices, and more, making it a versatile hub for home entertainment.

The AVR 235 also places a strong emphasis on user-friendliness, boasting an intuitive on-screen display and a user-friendly remote control. The graphical user interface guides users through the setup process and offers various adjustments to accommodate different room acoustics and personal preferences.

Additionally, the AVR 235 supports multi-room audio configurations, enabling users to enjoy sound throughout the house. It features an integrated AM/FM tuner, allowing access to radio stations, and provides options for connecting to external audio sources.

In summary, the Harman-Kardon AVR 235 is a powerful and feature-rich AV receiver that delivers exceptional sound quality and versatility. Its advanced technologies, extensive connectivity options, and user-friendly design make it an excellent choice for anyone looking to enhance their home theater system and enjoy a superior audio experience. With the AVR 235, Harman-Kardon once again proves its prowess in the world of high-fidelity audio.
Top Page Image Contents