Harman-Kardon AVR 235 owner manual Subwoofer

Page 18

System Configuration

opposed to a movie from a DVD player, VCR or cable/satellite set top.

If you wish to customize the speaker size individ- ually to each input, make certain that the cursor is on the BASS MGR line and press the ‹/› Buttons E so that INDEPENDENT appears in highlighted video. When this setting is entered all speaker size settings will be shown with their factory default size in the menu and all other inputs will turn to INDEPENDENT too. Now you should enter the speaker size settings prefered for the input selected, as described below. Remember that in this case the size set- tings just entered will apply to the current input ONLY, and you will need to go back to the INPUT menu to select another input, and then return to this menu page again to change the settings for the next input. Repeat the procedure for any input where you wish to have a set of speaker configuration different from the default settings.

2.Begin the speaker size setup process by making certain that the cursor is pointing toward the LEFT/RIGHT line, which sets the configura- tion for the front left and right speakers. If you wish to make a change to the front speakers’

configuration, press the ‹/ › Buttons E so that either LARGE or SMALL appears, match- ing the appropriate description from the definitions shown above.

When SMALL is selected, low-frequency front channel sounds will be sent only to the subwoofer output. If you choose this option and there is no subwoofer connected, you will not hear any low- frequency sounds with front channel signals.

When LARGE is selected, a full-range output will be sent to the front left and front right outputs. Depending on the choice made in the SUBWOOFER line in this menu (see below), the front left and right bass information may also be directed to the subwoofer.

NOTE: When the front speakers are set to the LARGE option and the surround mode is set to "Surround Off", or pure two-channel stereo, when an analog signal source is present it will be routed directly from the input to the volume control without being digitized or processed. If you have full-range front speakers and wish to remove all digital processing from the circuit path, select this configuration. If you wish to set this option for use with only one input, such as a CD player that uses an external DAC or an optional, external phono preamp, you must choose the INDEPENDENT setting on the BASS MGR line at the bottom of this menu so that only those inputs where the analog bypass is desired will be routed in this fashion, while other analog inputs such as a VCR or cable box will be digitized for surround processing.

Important Note: When a speaker set with a subwoofer and two front satellites connected to the Sub´s speaker outputs is used, the Sub´s inputs must be connected to the Front speaker outputs and LARGE must be selected for the front speakers (and NONE for the sub- woofer, see below).

3.When you have completed your selection for the front channel, press the ¤ Button Don the remote to move the cursor to CENTER.

4. Press the ‹/› Buttons E on the remote to select the option that best describes your center speaker, based on the speaker definitions shown below.

When SMALL is selected, low-frequency center channel sounds will be sent to the Fronts, if they are set to LARGE and Sub is turned off (see be- low). When Sub is on, low frequency center chan- nel sounds will be sent to the subwoofer only.

When LARGE is selected, a full-range output will be sent to the center speaker output, and NO center channel signal will be sent to the sub- woofer output (except when the Pro Logic II Music mode is in use).

NOTE: If you choose Logic 7 as the surround mode for the particular input source for which you are configuring your speakers, the AVR will not make the LARGE option available for the center speaker. This is due to the requirements of Logic 7 processing, and does not indicate a problem with your receiver.

When NONE is selected, no signals will be sent to the center-channel output. The receiver will operate in a “phantom” center channel mode. Center-channel information will be sent to the left and right front channel outputs and the cen- ter channel bass will be sent to the subwoofer output when L/R+LFE is selected in the SUBWOOFER line in this menu (see below). This mode is needed if no Center speaker is used. Note that when the Logic 7 Cinema or Enhanced surround modes are selected a Center speaker must be used, the Logic 7 Music mode works well without a Center too.

5.When you have completed your selection for the center channel, press the ¤ Button D on the remote to move the cursor to

SURROUND.

6. Press the ‹/› Buttons E on the remote to select the option that best describes the sur- round speakers in your system based on the speaker definitions shown on page 19.

When SMALL is selected, with all digital sur- round modes low-frequency surround channel sounds will be sent to the Fronts when Sub is turned off or to the subwoofer output when Sub is on. With any analog surround mode the rear bass feed depends on the mode selected and the setting of the Sub and front speakers.

When LARGE is selected, a full-range output will be sent to the surround channel outputs (with all analog and digital surround modes), and except with Hall and Theater modes, NO surround channel bass will be sent to the subwoofer out- put.

When NONE is selected, surround-sound infor- mation will be split between the front left and front right outputs. For optimal performance when no surround speakers are in use, the Dolby 3 Stereo mode should be used.

When you are using surround back speakers with your system, press the ¤ Button Don the remote to move the cursor to SURR BACK. This line serves two functions in that it not only configures the setting for the surround back channels when they are present, it also tells the AVR’s processing system to configure the unit for either 5.1 or 6.1/7.1 operation.

Press the ‹/ › Buttons on the remote to select the option that best describes the speakers in use at the left and right back surround positions based on the definitions on this page:

When NONE is selected, the system will adjust so that only 5.1-channel surround processing/ decoding modes are available and the surround back amplifier channels will not be used.

When SMALL is selected the system will adjust so that the full complement of 6.1/7.1 surround processing/decoding modes are available, and low-frequency information below the crossover point (identical with the one for the surround speakers) will be sent to the subwoofer output when the subwoofer is set to ON, or to the Front LEFT/RIGHT when subwoofer is set to OFF.

When LARGE is selected the system will adjust so that the full complement of 6.1/7.1 surround processing/decoding modes are available, and a full-range signal will be sent to the surround back channels, with no low-frequency information sent to the subwoofer output.

7.When you have completed your selection for the surround channels, press the ¤ Button D on the remote to move the cursor to

SUBWOOFER.

8. Press the ‹/› Buttons E on the remote to select the option that best describes your system.

18SYSTEM CONFIGURATION

Page 17 Page 19
Image 18
Page 17 Page 19
Contents AVR 235 Audio/Video Receiver Table of Contents Declaration of ConformityDescription and Features IntroductionFront panel analog A/V inputs Safety Information Important Safety InformationUnpacking Front Panel Controls # Preset Stations Selector Press this Digital Input Selector When playing aInformation on digital audio Rear Panel Connections Digital Audio Outputs Connect theseUnswitched Outlet + and negative terminalsMain Remote Control Functions › Button Speaker Select MuteChannel/8 Channel Direct Input See page 31 for more informationMain Remote Control Functions Output jacks Installation and ConnectionsAudio Equipment Connections Channel Direct Inputs External Amplifier ConnectionsVideo Equipment Connections Scart A/V ConnectionsAC Power Connections System and Power ConnectionsMain Room Remote Control Extension WattsSpeaker Placement Speaker SelectionSystem Setup System ConfigurationUsing the On-Screen Display First Turn OnInput Setup Speaker SetupSet Button Fto bring up the Speaker Setup menu Figure Subwoofer Within five seconds, either press the ‹/› buttons Night Mode Settings Surround SetupSetting to your taste ¤ Button Dso that the cursor is next toConfiguring the Surround Off Stereo Modes Stereo-Direct Bypass ModeInstalled and Dolby Digital chosen as the sur- round mode Stereo-Digital ModeDelay Settings To call up the menuOutput Level Adjustment Using EzSetPress and hold the SPL Indicator Select Volume until you can hear the test noise clearly When all channels have the same output levelIs then pressed to select OFF in the highlighted video System Configuration Surround Mode Chart OperationChannel Direct Inputs DTS Neo6 Music No delay availableMix of the in-phase material of the left and right channels Two-channel stereo program is being playedBasic Operation Source SelectionChannel/8-Channel Direct Input Surround Mode Selection Volume Up/Down buttonsButton Dolby Digital Digital Bitstream IndicatorsDigital Audio Playback PCM Audio PlaybackAudio, while the main feature is available Surround Mode TypesSpeaker/Channel Indicators PCM Playback IndicationsOutput Level Adjustment With Source Signals Tape RecordingIndicator Select Operation Advanced FeaturesMemory Backup Front-Panel-Display FadeFull-OSD Time Out Adjustment Turn On Volume LevelSemi-OSD Settings Display BrightnessDefault Surround Mode Tuner OperationBasic Tuner Operation RDS Display Options RDS TuningRDS Operation Program Search PTYProgramming the Remote Programming the Remote with CodesCode Readout Volume Punch-Through Macro ProgrammingProgrammed Device Functions Resetting the Remote Memory Channel Control Punch-ThroughBy the AVR Input Selector Function List SPLAVR DVD Power Switch 1 is pushed Troubleshooting GuideProcessor Reset Remote sensor ¯ is obscuredTechnical Specifications Harman Consumer Group International

AVR 235 specifications

The Harman-Kardon AVR 235 is a high-performance AV receiver that exemplifies the brand's commitment to delivering high-fidelity sound and cutting-edge technology. Designed for home theater enthusiasts, it combines a sleek aesthetic with powerful audio performance, making it an appealing choice for those looking to elevate their cinematic experience.

One of the standout features of the AVR 235 is its 7.1-channel surround sound capability, allowing for a truly immersive audio experience. It can deliver up to 70 watts per channel, ensuring that every sound, from the softest whisper to the loudest explosion, is reproduced with clarity and power. The receiver supports various surround sound formats, including Dolby Digital, Dolby Pro Logic II, and DTS, providing users with a versatile listening experience tailored to any content.

The AVR 235 integrates several advanced technologies to improve sound quality. This includes Harman-Kardon's proprietary "Logic 7" technology, which enhances stereo sources to provide a more expansive surround sound experience. Its advanced DSP (Digital Signal Processing) algorithms further optimize the audio signals, ensuring that the sound is not only powerful but also richly detailed and accurate.

Connectivity options abound with the AVR 235, facilitating a range of devices to be hooked up effortlessly. It features multiple HDMI inputs, component and composite video inputs, as well as analog and digital audio inputs. This extensive range of connections allows for seamless integration with Blu-ray players, gaming consoles, streaming devices, and more, making it a versatile hub for home entertainment.

The AVR 235 also places a strong emphasis on user-friendliness, boasting an intuitive on-screen display and a user-friendly remote control. The graphical user interface guides users through the setup process and offers various adjustments to accommodate different room acoustics and personal preferences.

Additionally, the AVR 235 supports multi-room audio configurations, enabling users to enjoy sound throughout the house. It features an integrated AM/FM tuner, allowing access to radio stations, and provides options for connecting to external audio sources.

In summary, the Harman-Kardon AVR 235 is a powerful and feature-rich AV receiver that delivers exceptional sound quality and versatility. Its advanced technologies, extensive connectivity options, and user-friendly design make it an excellent choice for anyone looking to enhance their home theater system and enjoy a superior audio experience. With the AVR 235, Harman-Kardon once again proves its prowess in the world of high-fidelity audio.
Top Page Image Contents