GE GX1S50F installation instructions Battery Installation, Instalación de la batería

Page 11

Installation Instructions.

Battery Installation

1.Use a small flat blade screwdriver or coin to remove the battery tray (A) at the side of the faucet base.

2.Install one CR2032, 3 volt battery (B) + side down into the battery tray

(A) (Fig. 8).

3.Slide tray into faucet base (C) until the battery tray (A) edge is flush with the side of the base.

4.The blue light (D) will flash 5 times, indicating a proper installation and system reset.

5.Normally the light is off. After 6 months of use, the light will flash again every 30 seconds, indicating the proper time to replace the filter canister.

NOTE: The blue light may stop blinking if it is allowed to blink for an extended period of time. To ensure proper operation, the battery should be replaced with every filter change.

Instrucciones de instalación.

Instalación de la batería

1.Use un destornillador de pala plana pequeño o una moneda para retirar la bandeja de la batería (A) en el costado de la base del grifo.

2.Instale una batería CR2032 de 3 voltios (B) con el lado positivo hacia abajo en la bandeja (A) (Fig. 8).

3.Deslice la bandeja en la base del grifo (C) hasta que el borde de la bandeja de la batería (A) esté nivelado con el costado de la base.

4.La luz azul (D) se iluminará de manera intermitente 5 veces, indicando una instalación correcta y la reinicialización del sistema.

5.Normalmente la luz está apagada. Después de 6 meses de uso, la luz se encenderá de manera intermitente nuevamente cada 30 segundos, indicando que es el momento de reemplazar el filtro.

NOTA: La luz azul puede dejar de encenderse si se deja por un periodo de tiempo prolongado. Para verificar la operación correcta, se debe cambiar la batería con cada cambio de filtro.

(D) Blue light / Luz azul

 

–

(B) Battery / Batería

(C) Faucet base /

 

 

(A) Battery tray / Bandeja de la batería

Base del grifo

+

 

Fig. 8

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Manual del propietario Water Filtration System Sistema de Filtración de AguaLEA Todas LAS Instrucciones Antes DE Usar Model GX1S50F Installation OverviewWater Filtration System Uses the Following Canister Generalidades sobre la instalaciónReplacement Filter Canister/Estimated Replacement Costs SmartWater Filtration System GX1S50F Using Filter GxrlqrRecomendaciones importantes para la instalación Important Installation RecommendationsTools and Materials Required for Installation Contents Included with the ProductAccesorio para el suministro de agua fría Cold Water Supply FittingOpción Faucet Spout Installations see ,Instalación del pico del grifo ver , página OptionPasos para la instalación consulte la para aclaración Faucet InstallationInstallation Steps refer to for clarification Instalación del grifoMontaje utilizando el tornillo suministrado Fig Mounting System InstallationMounting Using the Screw Provided Fig Montaje del sistemaCómo instalar la tubería Installing the TubingInstalación de la batería Battery InstallationProcedimiento para lavar Flush ProcedureReplacing the Filter Canister Cómo reemplazar el cartucho del filtroBefore you call for service… Instalado completamente Antes de solicitar un servicio…La luz indicadora en la base del grifo está intermitente Olor y/o sabor a cloro en el agua producidaPiezas y accesorios Soporte al consumidor Página Web de GESolicite una reparación Garantías ampliadasConsumer Support GE Appliances Website Schedule ServiceParts and Accessories GE Water Filtration System Warranty

GX1S50F specifications

The GE GX1S50F is an advanced water filtration system designed to provide clean and safe drinking water for households. This innovative system utilizes cutting-edge technologies to ensure that contaminants are effectively reduced while enhancing the overall taste and quality of the water.

One of the main features of the GE GX1S50F is its three-stage filtration process. The system first employs a sediment filter that captures large particles such as dirt, sand, and rust, ensuring that these impurities do not reach the subsequent stages. Following this, a carbon block filter takes over, which is adept at removing chlorine, lead, and other harmful chemicals that can affect the water's taste and safety. Finally, the system features a post-carbon filter that polishes the water, providing the finishing touch to ensure that every drop is crystal clear and fresh.

The GE GX1S50F is designed with user convenience in mind. Its compact size makes it easy to install, fitting seamlessly under most sinks without taking up excessive space. The system is also equipped with a simple shut-off valve, which allows users to quickly halt water flow during filter changes, minimizing mess and ensuring a straightforward replacement process.

Another significant characteristic of the GE GX1S50F is its durability and longevity. The filters are engineered to last up to six months, depending on usage and water quality, allowing households to enjoy cleaner water for a prolonged period without frequent replacements. This not only saves time but also adds to the system's cost-effectiveness.

In addition to its performance features, the GE GX1S50F is designed with sustainability in mind. By providing an efficient means of filtering tap water, the system reduces the reliance on single-use plastic water bottles, promoting an eco-friendly approach to water consumption.

Overall, the GE GX1S50F is a state-of-the-art water filtration solution that combines advanced technology with practical design. With its three-stage filtration process, easy installation, long-lasting filters, and commitment to sustainability, it offers an excellent choice for families looking to improve their drinking water quality while being mindful of their environmental impact.
Top Page Image Contents