Tips Consumer Support, Faucet Installation

Faucet Installation

Be sure there is room underneath the sink to make the needed connections. Select one of the following places to install the faucet:

—IN an existing sink spray attachment or soap dispenser hole.

—IN a hole to be drilled in the sink top.

—IN a hole to be drilled in the countertop, next to the sink.

NOTE: Looking at Fig. 4B, be sure the faucet base will fit flat against the surface at the selected location so the gasket will seal.

1 If drilling is needed, make a 1-1/4″ dia. hole.

Be sure to use the proper procedure for drilling porcelain or stainless steel.

2 Place base on threaded stem (flange facing down). Next, place large gasket on threaded stem, making sure the stem and two barbed studs fit through the gasket. Place spacer on stud (open end up) followed by metal washer and hex nut (Fig. 4A).

3 Insert washer into tubing adapter. Securely tighten to faucet stud.

Take the 27″ length of 3/8″ tubing and push one end completely onto the 3/8″ faucet barb fitting (Fig. 4B).

Position the Reverse Osmosis system under the sink. Referring to Fig. 5, on the next page, hang the system on cabinet wall.

Route the 1/4″ tubing (marked “1⁄4″ BARB ON FAUCET”) and the 3/8″ tubing (marked “FAUCET”) up through the mounting hole:

a Push one end of the 1/4″ tubing onto the 1/4″ barb on the faucet.

b Using the compression nut, fasten the 3/8″ tubing to the tubing adapter and tighten the nut. Make sure the tubing is completely seated in the adapter.

Remove the short shipping tube and insert the spout into the faucet body.

Lower the faucet assembly through the sink.

Under the counter, place the mounting plate above spacer and securely tighten the hex nut.

Safety Instructions Operating Instructions Installation

Spout

ASSEMBLED

Fig. 4A.

Lever

Faucet

Faucet stud

Base

Fig. 4B.

3/8″ barb fitting

1/4″ barb fitting

Tubing adapter

Instructions Troubleshooting

Large gasket

Metal washer Hex nut

Plastic washer

Tubing adapter

Mounting plate

Spacer

NOTE: For ease of service and maintenance, keep tubing lengths long enough so removal of the Reverse Osmosis system from under the sink is possible.

Compression nut

3/8″ tubing, 27″ long

1/4″ tubing marked 1/4″ barb

3/8″ tubing marked FAUCET

Tips Consumer Support

Compression nut

From RO

To drain From RO

GXRV10ABL01 specifications

The GE GXRV10ABL01 is a sophisticated variable frequency drive (VFD) designed to enhance efficiency in various industrial applications. Characterized by its versatility and advanced technologies, this device is ideal for controlling the speed and torque of electric motors, making it an integral component for modern automation systems.

One of the most notable features of the GE GXRV10ABL01 is its compact design, which allows for easy integration into existing systems without requiring significant modifications. This space-saving characteristic makes it suitable for a range of environments, including manufacturing floors, processing plants, and HVAC systems.

The GXRV10ABL01 is equipped with cutting-edge control technologies that improve performance and energy efficiency. It utilizes advanced algorithms for precise motor control, enabling smooth acceleration and deceleration while minimizing energy consumption. This enhances the overall efficiency of processes such as pumping, fans, and conveyors.

Another key feature is its robust communication capabilities. The GXRV10ABL01 supports a variety of communication protocols, including Ethernet/IP, Modbus, and Profinet. This interoperability allows for seamless integration with other control systems and facilitates real-time monitoring and data exchange, supporting Industry 4.0 initiatives.

User-friendly programming and operation are facilitated by the drive's intuitive interface. The built-in keypad allows for straightforward configuration and adjustments, while the ability to connect to external displays enhances usability. Furthermore, the drive supports various programming options, enabling customization to meet specific application requirements.

Safety features are paramount in the design of the GE GXRV10ABL01. It comes equipped with built-in protection mechanisms, including overcurrent, overvoltage, and thermal overload protection. These safety measures help to prevent damage to both the drive and connected machinery, ensuring reliable operation and longevity.

Durability is another hallmark of the GXRV10ABL01. Its rugged construction and high-quality components make it resilient against harsh environments, withstanding fluctuations in temperature, dust, and moisture. This makes it a dependable choice for diverse industrial applications.

In summary, the GE GXRV10ABL01 is a state-of-the-art variable frequency drive that combines advanced control technologies, robust communication capabilities, and essential safety features. Its compact design, user-friendly interface, and durability ensure it meets the demands of modern industrial automation, providing greater efficiency and reliability for critical operations.