GE GXRV10ABL01 owner manual Specification guidelines, Safety Instructions Operating

Page 3

Specification guidelines.

www.GEAppliances.com

Product – height 16 ″ width 17″ depth 6″

The system makes a good supply of drinking water each day.

How much it will make depends primarily on these things…

Feed water pressure limits—pounds per square inch (psi) . . . . . . . . . . . . . . . . . . . . . .40–125c

Feed water temperature limits—minimum/maximum degrees F. . . . . . . . . . . . . . . . . .40–100

Maximum Total Dissolved Solids (TDS)—parts per million (ppm) . . . . . . . . . . . . . . . .2000

Maximum water hardness @ 6.9 pH recommended to optimize membrane life—grains per gallon (gpg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Safety Instructions Operating

For water with hardness greater than 10 grains (at 6.9 pH) the use of a softener is recommended. Failure to install a water softener will reduce the life of the Reverse Osmosis membrane. See chart for additional information on the possible need for a water softener.

Hp

nI oc nim Wg ta re

8

7.5

7

6.5

6

WATER SOFTENER RECOMMENDED

Water Softener

not required

10

20

30

40

50

60

INCOMING WATER HARDNESS (GPG)

Instructions

Maximum iron, manganese, hydrogen sulfide (ppm) . . . . . . . . . . . . . . . . . . . . . .<0.1 Chlorine in water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Allowableb Feed water pH limits (pH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4–10Product (quality) water, 24 hours—gallons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10.0aProcess water per gallon of product water, 24 hours—gallons . . . . . . . . . . . . .5Percent rejection of TDS (new membrane) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92a

Cyst reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99.95% Storage tank capacity—gallons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.3 Automatic shutoff control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .yes

Prefilter and postfilter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(FX12PA) Carbon Block Reverse Osmosis membrane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(FX12M) Thin Film Polyamid Dimensions (inches) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .height 16“ width 17” depth 6”

a.Tested by NSF International according to ANSI/NSF Standard 58 has given 7.1 GPD. Source water test parameters are 50 psig, 77°F, pH of 7.5 ± 0.5, and 750 ppm total dissolved solids.

b.Removed (maximum of 2.0 ppm) by the Reverse Osmosis prefilter. REGULAR MAINTENANCE IS REQUIRED. Chlorine will destroy the Reverse Osmosis membrane.

c.If house water pressure is over 125 psi, install a pressure reducing valve in the water supply line. If house water pressure is under 40 psi, install a Reverse Osmosis booster pump (contact your local plumbing supply company).

3

Installation Instructions Troubleshooting Tips Consumer Support

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 7239210 215C1044P020 49-50071-101-04 JR InstallationManuel d’utilisation Et d’installation Manual del propietario InstalaciónSee the Sanitizing the Reverse Osmosis System section Support Troubleshooting TipsInstallation Instructions Operating Instructions ConsumerSpecification guidelines Safety Instructions OperatingHow much it will make depends primarily on these things… What the Reverse Osmosis System Does TroubleshootingAbout the reverse osmosis system Consumer SupportSafety Water Test Kit Care and cleaning of the reverse osmosis systemConsumer Support Troubleshooting Tips Prefilter and Postfilter Cartridge ReplacementSanitizing. do not USE Water During Water. do not ADD Chlorine FirstReverse Osmosis Cartridge Replacement Distort or Crush the Tubing and Flow Control SafetyInstallation instructions Important Installation RecommendationsTools and Materials Required for Installation Instructions Troubleshooting Tips Consumer Support Safety Instructions Operating InstructionsThings to Check Before Beginning Installation For 1/2 ″ OD or larger metal tubing only Step-by-step installation instructionsOptional Home Installation Where codes permit Feed Water SupplyBasement Access Installation a Safety InstructionsFiltration Drain Connection Installations Preferred Installation Options Options A, B and COption D Safety Instructions Operating Instructions Installation Faucet InstallationTips Consumer Support Faucet Drain Tubing and Water Supply Tubing Installations sectionSafety Instructions Operating Installation Checklist Now That Your Reverse Osmosis System is Installed…SanitizeProblem Possible Causes What To Do Before you call for service…Parts list General Electric parts catalog Operating Instructions Safety Instructions Troubleshooting TipsInstallation Instructions What GE Will Not Cover GE Reverse Osmosis System WarrantyTroubleshooting Tips Consumer Support GE Will ReplaceNuméro de modèle Numéro de série La section FrançaiseClientèle Conseils de dépannage Service à laCette quantité est fonction des données suivantes… Installation Service à la clientèle Conseils de dépannageGuide des spécifications Mesures de sécuritéMesures Dépannage Service àDe sécurité La clientèleAu sujet du système de filtration par osmose inversée SécuritéMesures de Cartouche de rechange pour le pré-filtre et le post-filtre Conseils de dépannage Service à la clientèleEntretien et nettoyage du système de filtration Trousse pour le test d’eauLe plastique Mesures de sécuritéComme indiqué ci-dessus. Le chlore détruira la Retirées du systèmeMesures Conseils de dépannage Service à la clientèleSécurité Mesures de sécurité Fonctionnement Instructions d’installationRecommandations d’installation importantes Outillage et matériel requis pour l’installationService à la clientèle Conseils Mesures de FonctionnementDe dépannage Instructions d’installation étape par étape Grandes dimensionsAlimentation d’eau Dépannage Service à la clientèle Conseils deOptions d’installation préférentielles Options A, B et C Installation DU Système AU SOUS-SOL aInstallation DE L’ADAPTATEUR DE LA Conduite DE Vidange D Mesures de Service à la clientèleInstallation du robinet Conseils de dépannageRaccordement à la conduite de vidange Tuyaux pour la vidange et l’alimentation d’eau10″ Liste de vérifications de l’installation De filtration par osmose inverséeInversée. Le chlore détruira la cartouche du système Problème Causes possibles Correctifs Mesures de sécurité Fonctionnement InstallationService à la clientèle Avant d’appeler un réparateurListe de pièces Catalogue des pièces de Général Electric Mesures de sécurité Fonctionnement Installation Garant General Electric Company. Louisville, KY Garantie du système de filtration par osmose inversée de GEGE remplacera Ce qui n’est pas couvertService de réparations Soutien au consommateurProlongation de garantie Número de modelo Número de serie La section en EspañolOperación Instalación Solucionar problemas Servicio al consumidorLa cantidad producida dependerá principalmente de… Pautas sobre las especificacionesSeguridad InstalaciónProblemas Servicio al consumidor Solucionar¿Qué hace el sistema de Ósmosis Inversa? Seguridad Instalación Servicio al consumidor Solucionar problemasKit de prueba del agua Reposición del cartucho de pre-filtro y post-filtroPoliamida de película delgada Nota Escuchará diferentes sonidos durante la Puede dañar el plásticoReposición del cartucho del sistema Ósmosis Inversa Solucionar problemas Servicio al consumidorServicio al consumidor Solucionar problemas Seguridad Operación Recomendaciones importantes para la instalaciónHerramientas y materiales requeridos para la instalación Cosas a revisar antes de iniciar la instalación Servicio al consumidor SolucionarInstalación Casera Opcional Donde los códigos lo permitan Suministro de agua de alimentaciónPara OD de 1/2 ″ o tubo de metal más largo únicamente Servicio al consumidorOpciones preferidas para la instalación Opciones A, B y C ProblemasServicio al consumidor Solucionar Instalaciones de la conexión del drenaje de filtraciónInstalación DEL Adaptador DE LA Línea DE Drenaje D Opción DSolucionar Instalación del grifoInstalaciones de la conexión del drenaje de filtración Tubo de drenaje del grifo y tubo de suministro de aguaServicio Al consumidor Solucionar problemasLista de verificación para la instalación Problema Posible causas Qué hacer Seguridad Operación InstalaciónServicio al consumidor Lista de partes Parte no Descripción DE LA Parte GXRV10ABL01 Catálogo de partes de General ElectricNotas Por el período de GE repondráQué no cubrirá GE Garante General Electric Company. Louisville, KYPiezas y accesorios Soporte al consumidor Página Web de GE AppliancesSolicite una reparación Garantías ampliadasConsumer Support GE Appliances Website Schedule Service

GXRV10ABL01 specifications

The GE GXRV10ABL01 is a sophisticated variable frequency drive (VFD) designed to enhance efficiency in various industrial applications. Characterized by its versatility and advanced technologies, this device is ideal for controlling the speed and torque of electric motors, making it an integral component for modern automation systems.

One of the most notable features of the GE GXRV10ABL01 is its compact design, which allows for easy integration into existing systems without requiring significant modifications. This space-saving characteristic makes it suitable for a range of environments, including manufacturing floors, processing plants, and HVAC systems.

The GXRV10ABL01 is equipped with cutting-edge control technologies that improve performance and energy efficiency. It utilizes advanced algorithms for precise motor control, enabling smooth acceleration and deceleration while minimizing energy consumption. This enhances the overall efficiency of processes such as pumping, fans, and conveyors.

Another key feature is its robust communication capabilities. The GXRV10ABL01 supports a variety of communication protocols, including Ethernet/IP, Modbus, and Profinet. This interoperability allows for seamless integration with other control systems and facilitates real-time monitoring and data exchange, supporting Industry 4.0 initiatives.

User-friendly programming and operation are facilitated by the drive's intuitive interface. The built-in keypad allows for straightforward configuration and adjustments, while the ability to connect to external displays enhances usability. Furthermore, the drive supports various programming options, enabling customization to meet specific application requirements.

Safety features are paramount in the design of the GE GXRV10ABL01. It comes equipped with built-in protection mechanisms, including overcurrent, overvoltage, and thermal overload protection. These safety measures help to prevent damage to both the drive and connected machinery, ensuring reliable operation and longevity.

Durability is another hallmark of the GXRV10ABL01. Its rugged construction and high-quality components make it resilient against harsh environments, withstanding fluctuations in temperature, dust, and moisture. This makes it a dependable choice for diverse industrial applications.

In summary, the GE GXRV10ABL01 is a state-of-the-art variable frequency drive that combines advanced control technologies, robust communication capabilities, and essential safety features. Its compact design, user-friendly interface, and durability ensure it meets the demands of modern industrial automation, providing greater efficiency and reliability for critical operations.
Top Page Image Contents