Faucet Assembly, Install the Faucet | GE PXRQ15RBL, PNRQ16RBL

Installation Instructions

FAUCET ASSEMBLY

INSTALL THE FAUCET

Be sure there is room underneath and above the sink to make the needed connections. Before starting, make sure there is sufficient room for the faucet base and unit. Select one of the following places to install the faucet:

A.In an existing sink spray attachment or soap dispenser hole.

B. In a hole to be drilled in the sink top.

C. In a hole to be drilled in the countertop, next to the sink.

NOTES:

•Be sure the faucet base will fit flat against the surface at the selected location so the bottom gasket between the base and surface area will seal.

•Make sure to leave enough clearance

at the back of the faucet in case you need to remove it.

Installation Steps (refer to illustration below for clarification)

1.If drilling is needed, make a 11⁄2” diameter hole. Be sure to use the proper procedure for drilling porcelain or stainless steel.

Special drill bits may be needed. Consult a qualified plumber for the proper procedure.

NOTE: When drilling in stainless steel, the edges may be sharp and could puncture the tube. Be careful to not cut yourself or damage the tube.

2.Remove the faucet body and base by turning the base counterclockwise.

3.Push the 1/4” black tube and the 3/8” black

tube onto the correct barb fittings on the faucet base. Push the 3/8” blue tube through the base.

3/8” Blue tube

Faucet base

3/8” Barb fitting 1/4” Barb fitting

3/8” Black tube 1/4” Black tube

4. Align the gasket to cover the hole completely. Then place the toggle screw on the base into the hole.

Faucet base

Sink Gasket

Toggle screw

INSTALL THE FAUCET (CONT.)

5.Tighten the toggle screw until the base is firmly in place and does not wobble or turn.

6.Push the 3/8” blue tube up to connect it to

the fitting on the bottom of the faucet body. It should go in about 3/4”. Pull tube slightly to make sure it is secure.

Faucet body
3/8” Blue tube	Gasket
3/8” Blue tube
Faucet base	1/4” Black tube	Sink
	1/4” Black tube

Toggle screw	3/8” Black tube
	Mounting screw

7.Push the faucet body down into the faucet base and turn the faucet 1/8 of a turn counterclockwise until it stops into place.

NOTE: You can install the faucet so the handle is on the right or the left side.

If you want the faucet handle on the right, position the handle on the front-right side of the base before turning 1/8 of a turn counterclockwise.

If you want the faucet handle on the left, position the handle on the rear-left side of the base before turning 1/8 of a turn counterclockwise.

FaucetFaucet

Faucet handle on the RIGHT

Faucet handle on the LEFT

8.Locate the hole at the rear of the base. Insert the set

screw and begin to tighten by hand. Finish tightening with the Allen wrench provided in the packet.

DO NOT OVERTIGHTEN.

PNRQ16RBL, PXRQ15RBL specifications

The GE PXRQ15RBL and PNRQ16RBL are standout refrigerator models that combine modern design with advanced technologies, making them a top choice for consumers seeking both functionality and style in their kitchen. These models are part of GE's renowned Profile series, which is known for its innovative features and energy efficiency.

One of the main features of both the PXRQ15RBL and PNRQ16RBL is their spacious interior, designed to maximize storage space while providing easy access to food items. The shelves are adjustable, allowing users to customize the layout according to their needs. With ample storage options, including bins, drawers, and door storage, these refrigerators make organization seamless and efficient.

Energy efficiency is a major characteristic of these models, complying with ENERGY STAR standards. This not only helps reduce the carbon footprint but also translates into savings on utility bills over time. The advanced cooling technology ensures that food stays fresher for longer periods, maintaining optimal temperatures and humidity levels throughout the interior.

Additionally, the PXRQ15RBL and PNRQ16RBL feature GE's advanced ice and water dispenser located conveniently on the door. This feature provides quick access to chilled water and ice without the hassle of opening the refrigerator, enhancing convenience for everyday use. The dispensers are designed to reduce spills, ensuring a clean and tidy kitchen experience.

Another significant technology incorporated in these models is the "TwinChill" evaporators, which separate the climates in the fresh food and freezer sections. This innovative design prevents the transfer of odors between compartments and helps maintain ideal humidity levels, further preserving the freshness of food items.

Both refrigerators are also equipped with LED lighting, providing clear visibility throughout the interior while being energy-efficient. The sleek black finish enhances the modern aesthetic, allowing these refrigerators to seamlessly blend with any kitchen decor.

In conclusion, the GE PXRQ15RBL and PNRQ16RBL refrigerators are exemplary models that cater to the needs of today’s consumers. With features such as spacious interiors, energy efficiency, advanced cooling technology, and convenient ice and water dispensers, these refrigerators represent a perfect balance of style, innovation, and practicality in the modern kitchen. Their thoughtful design and superior functionality make them a worthy investment for those looking to upgrade their kitchen appliances.