Installation Instructions, Installation Overview

Installation Instructions.

Important Installation Recommendations

Read entire manual. Failure to follow all guides and rules could cause personal injury or property damage.

■Check with your local public works department for plumbing codes. You must follow their guides as you install the Water Filtration system.

■Use the Water Filtration system on a potable, safe-to-drink, home COLD water supply only. The filter cartridges will not purify water or make unsafe water safe to drink. DO NOT use on HOT water (100°F max.).

■Protect the Water Filtration system and piping from freezing. Water freezing in the system will damage it.

■Your Water Filtration system will withstand up to 125 psi water pressure. If your house water supply pressure is higher than 100 psi during the day (it may reach higher levels at night), install a pressure-reducing valve before the system.

WARNING: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. GXSL03C (rev. 2) and GXSV10C are certified for cyst reduction and may be used on disinfected water that may contain filterable cysts. The water should be tested periodically to verify that the system is performing satisfactorily. Small parts remaining after the installation could be a choke hazard. Discard safely.

Tools and Materials Required for Installation

■Slotted and Phillips screwdrivers

■Pliers and adjustable jaw wrench

■Hand- or battery-powered drill and 1⁄4 ″ bit (saddle valve installation)

■Electric drill and drill bit to drill 1″–1 1⁄4 ″ hole (type as required) if mounting hole is needed for faucet

CAUTION: To avoid damaging the sink, consult a qualified plumber or installer for drilling procedures. Special drill bits may be needed for porcelain or stainless steel.

Contents included with the product:

■Water filter assembly, including mounting bracket and screws

■Product Literature (Owner’s Manual and Installation, Product Data Sheet, Owner Product Registration Card)

■Water supply/saddle valve

■Filtered water faucet for sink or countertop mounting

■Electronic indicator faucet base and battery pack (GXSV10C only)

■3⁄8 ″ tubing and fittings to make all needed connections

■Sump wrench

Installation Overview

	Locate the drinking water
	system on the cold water
	supply pipe, under the
	kitchen and/or bathroom	Sink
	sink, to filter the cold	Sink
	sink, to filter the cold

Tubing insert

Filtered	Tubing adapter
water faucet

Compression nut

drinking water.

Battery pack

Hot Cold

Tubing

Water supply valve

Water out

Shutoff valve

NOTE: To change the filter cartridge, you must turn off the water. A nearby shutoff valve is convenient. Most sinks already have shutoff valves on the supply pipes.

	Mounting
Water in	screw (2)
Tubing	Filter II
Tubing
Filter I

GXSL03C, GXSV10C specifications

The GE GXSL03C and GXSV10C are two models in General Electric's range of water filtration systems, known for their innovative features and advanced technologies. Designed to provide clean and safe drinking water, these systems cater to a variety of needs, from residential households to more extensive applications.

The GE GXSL03C model is particularly notable for its compact design and efficiency. It incorporates a reverse osmosis filtration system, which is highly effective in removing impurities, harmful contaminants, and sediments from water. This model is equipped with a five-stage filtration process that includes pre-filters, post-filters, and a thin-film composite membrane, ensuring a thorough purification. It has a maximum flow rate that allows for convenient water delivery, making it suitable for daily use.

On the other hand, the GE GXSV10C boasts a higher capacity and is designed specifically for larger households or small businesses. This model also employs advanced filtration technology, including a multi-stage process that removes chlorine, lead, and other unwanted substances. A key feature of the GXSV10C is its built-in smart technology, which monitors the status of filters and indicates when replacements are due. This ensures optimal performance and convenience for users.

Both models highlight user-friendly designs, featuring easy-to-replace filters and straightforward installation processes. They come with detailed instructions and typically include necessary accessories for setup. Moreover, the compact nature of these systems allows for flexible installation options, including under-sink locations or in utility areas.

Durability is another strong characteristic of both the GXSL03C and GXSV10C. They are constructed from high-quality materials designed to withstand common wear and tear while maintaining performance over time. Additionally, GE backs these products with reliable customer service and support, ensuring users can easily access help when needed.

In summary, the GE GXSL03C and GXSV10C present powerful water purification solutions featuring advanced filtration technologies, user-friendly designs, and durability. Their focus on efficiency and performance makes them excellent choices for consumers seeking improved water quality in their homes or businesses. With these systems, customers can enjoy peace of mind knowing they are investing in reliable water filtration solutions.